Experimental study on the heat transfer and flow characteristics of nanorefrigerants inside a corrugated tube

The heat transfer and flow characteristics of MWCNT-R141b nanorefrigerant with different mass fractions have been studied through experiments. Experimental results were compared with existing correlations. A two-step method was used to prepare the nanorefrigerants. Span-80 was used as surfactant with an average particle diameter of 20 nm. Transmittance method was used to evaluate the stability of nanorefrigerants. Results showed that the stability of MWCNT-R141b nanorefrigerant, which is the added dispersant, was good during the experiments. The 0.3 wt% MWCNT-R141b nanorefrigerants had optimal heat transfer enhancement effects compared with pure refrigerants. The maximum Nusselt number increased by 40%. The specific pressure drop of nanorefrigerant increased as the Reynolds number (Re) increased, and the specific pressure drop of the pure refrigerant was minimum, which is similar to R141b.     

3S技术应用现状与发展趋势

3S技术出现至今,已在诸多领域成功运用并产生了巨大的价值。文章简单介绍了3S三大组成部分:GIS、RS、GNSS的基本概念,分析了3S技术目前在农业、生态环境监测、土地资源管理以及智慧城市方面的应用现状以及对其在该方面未来的发展趋势进行展望。最后对目前3S在应用中遇到的一些问题进行了探讨,给未来3S技术的发展提供一些参考。     

Development and validation of a micro-fin tubes evaporator model using R134a and R1234yf as working fluids

This paper presents a model of shell and tube evaporator with micro-fin tubes using R1234yf and R134a. The model developed for this evaporator uses the ε-NTU method to predict the evaporating pressure, the refrigerant outlet enthalpy and the outlet temperature of the secondary fluid. The model accuracy is evaluated using different two-phase flow boiling correlations for micro-fin tubes and comparing predicted and experimental data. The experimental tests were carried out for a wide range of operating conditions using R134a and R1234yf as working fluids. The predicted parameter with maximum deviations, between the predicted and experimental data, is the evaporating pressure. The correlation of Akhavan– Behabadi et al. was used to predict flow boiling heat transfer, with an error on cooling capacity prediction below 5%. Simulations, carried out with this validated model, show that the overall heat transfer coefficient of R1234yf has a maximum decrease of 10% compared with R134a.     

McBSP在DSP与PC机通信中的研究与设计

本文介绍了TMS320VC5402DSP的多通道缓冲串行口McBSP的特点，针对用户经常面临的DSP系统与PC机实时交换数据时通信接口标准不兼容的问题，提出了一种新的串行通信设计方案，实现了DSP同步串口McBSP与PC机异步串口RS—232的全双工通信。     

非线性编辑系统中常见的外部数字接口

非线性编辑系统的接口包括计算机内部接口和外部接口。在外部接口中，数字接口由于其自身的特点和优势被用得越来越多。非线性系统的外部数字接口一般包括数字视音频接口和遥控接口，下面对常用的SDI，IEEE1394，SDTI，AES／EBU，RS232C，RS422A等接口进行择要介绍，并对一些接口的特点作了分析和比较。     

Origin and practical significance of the sticky dough factor in 1BL/1RS wheats

When translocated into wheat, the short arm of the 1R chromosome of rye carries with it linked resistance genes to powdery mildew, stripe rust, leaf rust and stem rust. The translocation is also reported to increase yield potential of hard wheats. However, many doughs made from some 1BL/1RS hard wheats are unacceptable for breadmaking purposes because of excessive stickiness and mixing intolerance. 1BL/1RS wheats may be sticky because of: the inheritance of secalin proteins from rye and absence of key glutenin subunits; higher amounts and/or differences in the composition of cell wall polysaccharides, β‐glucans and pentosans; and/or the presence of a ferulic acid ester moiety residing with the water‐soluble fraction of 1BL/1RS flours. None of these hypotheses has been proven or disproven, to date, as a cause of excessive stickiness. Investigators have found that 1BL/1RS doughs are not uniformly sticky and are in some instances less sticky than non‐1BL/1RS doughs. Significant genotype–environment interactions have been reported for dough stickiness and flour quality characteristics of 1BL/1RS wheats. Investigators have generally failed to find significant differences in the breadmaking performance of 1BL/1RS and non‐1BL/1RS hard wheats despite a report that 1BL/1RS doughs break down and soften during high‐speed mixing. The 1BL/1RS translocation has been shown to reduce cookie spread of soft wheat flours but has no deleterious effects on cake volume or texture. © 2002 Society of Chemical Industry     

基于可编程逻辑阵列的RS232至RS422的串行口扩展电路

介绍了利用可编程逻辑阵列把1路RS232扩展至4路RS422的串行口电路设计方法。该扩展电路不占用PC系统资源，同时具有结构简单，使用方便，通用性和可补性强等特点，可广泛应用于主从式多机通讯系统中。     

Markov analysis of qualitative dynamics1

Common sense sometimes predicts events to be likely or unlikely rather than merely possible. We extend methods of qualitative reasoning to predict the relative likelihoods of possible qualitative behaviors by viewing the dynamics of a system as a Markov chain over its transition graph. This involves adding qualitative or quantitative estimates of transition probabilities to each of the transitions and applying the standard theory of Markov chains to distinguish persistent states from transient states and to calculate recurrence times, settling times, and probabilities for ending up in each state. Much of the analysis depends solely on qualitative estimates of transition probabilities, which follow directly from theoretical considerations and which lead to qualitative predictions about entire classes of systems. Quantitative estimates for specific systems are derived empirically and lead to qualitative and quantitative conclusions, most of which are insensitive to small perturbations in the estimated transition probabilities. The algorithms are straightforward and efficient.     

10MW高温气冷实验堆(HTR-10)燃耗测量系统控制方案的改进

基于10MW高温气冷实验堆(HTR-10)的FCA系统及CFC系统的设计原理及运行规程,在不改变FCA系统原有设备部件的前提下,对FCA系统运行逻辑关系进行了优化,改进了原燃耗测量程序,实现了燃耗测量过程的自动运行及测量结果的自动建库.在此基础上,设计了CFC系统与FCA系统PLC的通信协议,实现了燃耗测量流程与控制系统的实时数据通信.上述改进的结果使得燃料装卸流程不再需要另设运行班组,提高了效率,将人为操作的步骤最少化,降低了误操作的可能性.     

Identification of critical erosion prone areas in the small agricultural watershed using USLE,GIS and remote sensing

In the present study, Karso watershed of Hazaribagh, Jharkhand State, India was divided into 200 × 200 grid cells and average annual sediment yields were estimated for each grid cell of the watershed to identify the critical erosion prone areas of watershed for prioritization purpose. Average annual sediment yield data on grid basis was estimated using Universal Soil Loss Equation (USLE). In general, a major limitation in the use of hydrological models has been their inability to handle the large amounts of input data that describe the heterogeneity of the natural system. Remote sensing (RS) technology provides the vital spatial and temporal information on some of these parameters. A recent and emerging technology represented by Geographic Information System (GIS) was used as the tool to generate, manipulate and spatially organize disparate data for sediment yield modeling. Thus, the Arc Info 7.2 GIS software and RS (ERDAS IMAGINE 8.4 image processing software) provided spatial input data to the erosion model, while the USLE was used to predict the spatial distribution of the sediment yield on grid basis. The deviation of estimated sediment yield from the observed values in the range of 1.37 to 13.85 percent indicates accurate estimation of sediment yield from the watershed.