排序方式: 共有60条查询结果,搜索用时 15 毫秒
1.
The low temperature specific heat of Sm-Al-Co ternary
metallic glasses is investigated and a clear anomaly associated with
the Boson peak is identified. While this anomaly depends slightly on
the chemical composition, it has no dependence on external magnetic
field. To figure out the mechanism of the Boson peak, we interpret
the data within various model frameworks. Unlike earlier
work, our study shows that this Boson peak is mainly ascribed to an
additional T2 term of the specific heat, which may originate
from the quasi-two-dimensional and short-range ordered structure
units possibly existing in the metallic glasses. 相似文献
2.
用线圈电流控制非平衡磁场,用汤森放电击穿形成深度自触发放电,用磁阱捕获放电形成的二次电子和导致漂移电流,形成了高功率非平衡磁控溅射放电。采用偏压为-100V相对磁控靶放置的圆形平面电极收集饱和离子电流;在距离磁控靶14cm的位置由Langmuir探针测量浮置电位;示波器测量磁控靶的脉冲电压、电流、浮置电位和饱和离子电流信号。装置的放电脉冲功率达到0.9MW,脉冲频率最大值为40Hz左右,空间电荷限制条件是控制电子电流和离子电流的主要机制。 相似文献
3.
铜合金以低电阻率为特征,由于电阻率与强度存在着共同的微观结构机理,两者往往协同变化,而导致难以对合金进行性能的全面评估和选材.本文以Cu-Ni-Mo合金作为研究对象,以团簇结构[Mo_1-Ni_(12)]构建固溶体的近程序结构模型,解析了电阻率和强度依赖于成分的定量变化规律,并定义了拉伸强度/电阻率的值为代表合金本质特性的"强阻比",得到了完全固溶态Cu-Ni-Mo合金的强阻比为7×10~8MPa/?·m,完全析出态的强阻比为(310—490)×10~8MPa/?·m.进而应用强阻比对常用铜合金进行了性能分区,给出铜合金材料选材的依据,得出了基于Cu-(Cr, Zr, Mg, Ag, Cd)等二元基础体系的铜合金适用于高强高导应用,而基于Cu-(Be, Ni, Sn, Fe, Zn, Ti, Al)等为基础二元体系的铜合金不能实现高强高导.该强阻比为310的特征性能分界线的发现为合金性能的全面评估提供了量化依据,可指导高强高导铜合金的选材和研发. 相似文献
4.
Deposition of Hydrogen-Free Silicon Nitride Thin Films by Microwave ECR plasma Enhanced Magnetron Sputtering at Room Temperature 下载免费PDF全文
Hydrogen-free silicon nitride (SiNx) films were deposited at room temperature by microwave electron cyclotron resonance (MW-ECR) plasma enhanced unbalance magnetron sputtering system. Both Fourier-transform infrared spectroscopy and x-ray photoelectron spectroscopy are used to study the bonding type and the change of bonding structures of the silicon nitride films. The results indicate that the chemical structure and composition of SiNx films deposited by this technique depend strongly on the N2 flow rates, the stoichiometric SiNx film, which has the highest hardness of 22.9 GPa, could be obtained at lower N2 flow rate of 4 sccm. 相似文献
5.
以Ti4040Zr4040Ni2020合金为研究对象,用铜 模吸铸法制备出直径为3mm的致密单相准晶棒,通过维氏显微硬度测定和单向压缩实验方 法研究了该合金的室温力学性能 .结果表明:Ti4040Zr4040Ni2020准晶具有良好 的弹性变形能力,室温弹性应 变可达125%.同时,它具有相对高的室温硬度(约55GPa),是普通Ti合金的15倍.T i4040
关键词:
准晶
Ti-Zr-Ni合金
解理断裂 相似文献
6.
利用强流脉冲电子束装置在各种工艺条件下对奥氏体不锈钢、单晶铝及多晶铝等面心立方金属进行辐照处理.利用扫描电子显微镜和透射电子显微镜等详细分析了辐照样品的变形组织与结构.通过分析,在一定程度上建立起强流脉冲电子束诱发的应力特征与变形结构之间的关系,并对目前现有的几种应力波数值模拟结果进行了分析.实验结果表明,强流脉冲电子束能够在材料内部诱发102—103MPa的应力,其传播方式与材料的 晶体结构关系密切.这一应力是导致材料深层性能与微观组织结构发生变化的根源所在.
关键词:
强流脉冲电子束
应力
微观结构
变形 相似文献
7.
Deposition of Diamond-Like carbon Films by High-Intensity Pulsed Ion Beam Ablation at Various Substrate Temperatures 下载免费PDF全文
Diamond-like carbon (DLC) films have been deposited on to Si substrates at substrate temperatures from 255℃ to 400O℃ by a high-intensity pulsed-ion-beam (HIPIB) ablation deposition technique. The formation of DLC is confirmed by Raman spectroscopy. According to an x-ray photoelectron spectroscopy analysis, the concentration of sp^3 carbon in the films is about 40% when the substrate temperature is below 300℃ C. With increasing substratetemperature from 25℃ to 400℃, the concentration of sp^3 carbon decreases from 43% to 8%. In other words,sp3 carbon is graphitized into sp^2 carbon when the substrate temperature is above 300℃. The results of xray diffraction and atomic force microscopy show that, with increasing the substrate temperature, the surface roughness and the friction coefficient increase, and the microhardness and the residual stress of the films decrease. 相似文献
8.
采用MEVVA源(Metal Vapor Vacuum Arc Ion Source)离子注入合成β-FeSi2薄膜,用常规透射电镜和高分辨电镜研究了不同制备参数下β-FeSi2薄膜的显微结构变化. 研究结果表明:调整注入能量和剂量,可以得到厚度不同的β-FeSi2表面层和埋入层. 制备过程中生成的α,β,γ和CsCl型FeSi2相的相变顺序为γ-FeSi2→β-FeSi2→α-FeSi2,CsCl-FeSi2→β-FeSi2→α-FeSi2或β-FeSi2→α-FeSi2. 当注入参数增加到60kV,4×1017ions/cm2,就会导致非晶的形成,非晶在退火后会晶化为β-FeSi2相,相变顺序就变为非晶→β-FeSi2→α-FeSi2. 随退火温度逐渐升高硅化物颗粒逐渐长大,并向基体内部生长,在一定的退火温度下硅化物层会收缩断裂为一个个小岛状,使得硅化物/硅界面平整度下降. 另外,对于β-FeSi2/Si界面取向关系的研究表明,在Si基体上难以形成高质量β-FeSi2薄膜的原因在于多种非共格取向关系的并存、孪晶的形成以及由此导致的界面缺陷的形成. 相似文献
9.
利用团簇成分式方法设计系列低密度Co基高温合金[Al-(Co8Ni4)]((Al0.5(Ti/Nb/Ta)0.5Mo0.5)(Mo0.5Cr0.5Co0.5))(=Co8.5Ni4Al1.5Mo1.0Cr0.5(Ti/Nb/Ta)0.5),采用真空非自耗电弧炉制备合金铸锭,并对其在1300℃固溶15h,在900℃下进行长期时效处理,进而对时效态样品进行微观组织表征和力学性能测试.结果表明,当Ti/Nb/Ta,Ti/Nb和Ti/Ta以等物质的量比匹配时,3种合金的微观组织均表现为立方形γ’相均匀地分布在γ基体中,这取决于合金适中的γ/γ’点阵错配度(0.27%—0.34%).在900℃长期时效过程中,3种合金中的γ’相均具有较小的粗化速率,且合金的显微硬度随时效时间基本不发生变化(27... 相似文献
10.
用线圈电流控制非平衡磁场,用汤森放电击穿形成深度自触发放电,用磁阱捕获放电形成的二次电子和导致漂移电流,形成了高功率非平衡磁控溅射放电。采用偏压为-100V相对磁控靶放置的圆形平面电极收集饱和离子电流;在距离磁控靶14cm的位置由Langmuir探针测量浮置电位;示波器测量磁控靶的脉冲电压、电流、浮置电位和饱和离子电流信号。装置的放电脉冲功率达到0.9MW,脉冲频率最大值为40Hz左右,空间电荷限制条件是控制电子电流和离子电流的主要机制。 相似文献