钢摩擦磨损的概率统计模型

本文根据对钢磨陨表面系统的扫描电子显微镜与俄歇电子能谱仪分析提出了摩擦磨损的概率统计模型,其要点在于将真实接触面积内的接触形式区分为3种,即氧化膜-氧化膜、金属-金属和金属-氧化膜,并且指出每一种接触形式的比率都是随机的,因而都服从概率分布。本文应用概率统计方法推导出了摩擦系数与磨损率的数学表达式。在推导过程中使用了一个“新鲜暴露金属发面”的新概念。理论计算结果与实测值相吻合。     

Study on the preparation and mechanical properties of alumina ceramic coating reinforced by graphene and multi-walled carbon nanotube

The paper investigates preparation and mechanical performances of a composite ceramic coating reinforced by graphene and multi-walled carbon nanotube. The carbon nanotube is functionalized with the carboxyl functional group (–COOH) and un-functionalized with sodium dodecyl benzene sulfonate (SDBS). The structure of the functionalized and hybrid-functionalized carbon nanotube is identified using infrared spectroscopy (FTIR analysis). The coating is brushed on the matrix and then cures under temperature lower than 250°C. The morphological and cross section features are studied by scanning electron microscopy (SEM). The distributions of hardness and fracture toughness are determined using a microhardness tester. The adhesive strength is evaluated using a universal tensile tester. The tribological properties are detected using friction wear testing machine. The experimental results show that the structure of the composite coating is compact, and both graphene and hybridtreated carbon nanotube are well dispersed. Addition of 0.2 wt % graphene and 0.2 wt % hybrid-functionalized carbon nanotube results in a prominent increase in hardness and fracture toughness. Meanwhile, the adhesive strength between the composite coating and the metallic substrate is well improved due to the high tensile strength of both graphene and carbon nanotube. Compared with pure alumina coating, the friction coefficient as well as the wear depth and width of grinding crack of the composite coating is much lower.

     

Influence of zinc oxide on corrosion resistance of alumina based chemically bonded ceramic coatings

Russian Journal of Applied Chemistry - With thermal chemical reaction, the chemically bonded ceramic coatings are prepared on A3 steel. Influence of zinc oxide on corrosion resistance of the...     

调度自动化机房网络配线管理软件设计与实现

针对公司调度自动化机房网络配线无图纸管理和标签标识不规范的情况,自主研发了一套机房网络配线管理软件。首先,分析了配线可视化管理软件应对网络配线绘图和标签信息自动生成的功能需求,并运用MVC模式理论进行软件架构设计;其次,重点阐述了基于QT图形库的关键功能实现,包括核心图元类的构建、元件库组件可配置生成、图形序列化反序列操作、拓扑查找、设备图元属性管理及标签信息自动生成功能等;最后,通过举例说明该软件在实际机房管理中的使用方法和应用成效。应用结果表明,通过绘制整个机房的网络连接图并录入相关设备属性信息,有助于提高机房网络故障的诊断效率和降低机房系统的运维风险。     

石墨烯/碳纳米管增强氧化铝陶瓷涂层的制备及摩擦学性能的研究

对碳纳米管进行混杂功能化处理,并与石墨烯,氧化铝按一定配比制成骨料,与胶黏剂混合充分,采用手工涂覆,低温固化的方法在304不锈钢表面制备复合陶瓷涂层.对混杂碳纳米管分子组成进行了表征;对涂层的微观结构,石墨烯和碳纳米管的分散性,涂层的显微硬度、断裂韧性、涂层与基体的结合强度及摩擦学性能进行了分析.结果表明:混杂处理的碳纳米管表面既接枝了活性基团同时也包覆了表面活性剂,复合涂层结构致密,石墨烯和混杂处理的碳纳米管均匀分散在涂层中,且复合涂层的硬度、断裂韧性、结合强度和耐磨减摩性能明显提高.     

允许租用货栈的库存系统的最优进货策略

本文从实际背景出发，提出了允许租用货栈的库存系统的库存模型，在一般时变需求并允许短缺的假定下，得到了寻求该系统最优进货策略的一种交替逼近方法。并给出了数字例子。     

Link Polynomials of Higher Order

In this paper, we study certain polynomial invariants of links(singular or non-singular) that are related to the Homfly polynomialand Vassiliev's invariants. The Homfly polynomial H_L [3] (alsoknown as the Flypmoth polynomial) satisfies the well-known skeinrelation The Vassiliev invariants [1, 2] (of order 1) satisfy the relations and The invariants that we study satisfy the skein relations      

润滑条件下钢表面氧化膜结构的SAM研究

作者在球-盘式摩擦磨损试验机上采用阶梯式加载和20~#机油滴注式润滑进行了GCr15钢球对45~#钢盘的摩擦磨损试验。通过摩擦系数的变化记录了在不同滑动速度下摩擦磨损状态发生转化时的临界载荷,从而获得了反映摩擦副摩擦学特性的P-V图,并用扫描俄歇微探针仪(SAM)研究了该摩擦副处于不同状态时表面氧化膜的结构,提出了钢表面氧化膜的结构层次模型,论证了钢的摩擦磨损特性与氧化膜结构之间的关系。     

带有两货栈及时变需求的变质性物品的最优EOQ模型(英)

本文针对一般的时变需求与两个货栈（自己货栈和租用货栈），建立了变质性物品的最优确定性EOQ模型，提供了用来寻求最优补充策略的方法，并就线性需求出示了两个数值例子．