Short-term power sources for tokamaks and other physical experiments

The Compass-D tokamak is being planned to move from UKAEA Culham (England) be and reinstalled in IPP Prague (Czech Republic). An overview of Compass-D energetics is described in short. The new power sources have to be designed. Alternative solutions of power sources have been investigated. Ignitrons and mechanical breakers can be replaced by modern high-power semiconductors. With respect to the need of accumulated energy, new technologies of energy storage - supercapacitors and high-speed flywheels, not applied up to now in similar fusion projects, are characterized in comparison with traditional ones - capacitors and big motor-flywheel generators. It is shown that these technologies enhance possibilities in arrangement of power supplies for tokamaks as well as for other high-power demanding experiments with pulse length from fraction to tens of seconds.     

A Novel Insight into the Cardiotoxicity of Antineoplastic Drug Doxorubicin

Doxorubicin is a commonly used antineoplastic agent in the treatment of many types of cancer. Little is known about the interactions of doxorubicin with cardiac biomolecules. Serious cardiotoxicity including dilated cardiomyopathy often resulting in a fatal congestive heart failure may occur as a consequence of chemotherapy with doxorubicin. The purpose of this study was to determine the effect of exposure to doxorubicin on the changes in major amino acids in tissue of cardiac muscle (proline, taurine, glutamic acid, arginine, aspartic acid, leucine, glycine, valine, alanine, isoleucine, threonine, lysine and serine). An in vitro interaction study was performed as a comparison of amino acid profiles in heart tissue before and after application of doxorubicin. We found that doxorubicin directly influences myocardial amino acid representation even at low concentrations. In addition, we performed an interaction study that resulted in the determination of breaking points for each of analyzed amino acids. Lysine, arginine, β-alanine, valine and serine were determined as the most sensitive amino acids. Additionally we compared amino acid profiles of myocardium before and after exposure to doxorubicin. The amount of amino acids after interaction with doxorubicin was significantly reduced (p = 0.05). This fact points at an ability of doxorubicin to induce changes in quantitative composition of amino acids in myocardium. Moreover, this confirms that the interactions between doxorubicin and amino acids may act as another factor most likely responsible for adverse effects of doxorubicin on myocardium.     

Interaction of Cucurbit[7]uril with Oxime K027, Atropine,and Paraoxon: Risky or Advantageous Delivery System?

Antidotes against organophosphates often possess physicochemical properties that mitigate their passage across the blood–brain barrier. Cucurbit[7]urils may be successfully used as a drug delivery system for bisquaternary oximes and improve central nervous system targeting. The main aim of these studies was to elucidate the relationship between cucurbit[7]uril, oxime K027, atropine, and paraoxon to define potential risks or advantages of this delivery system in a complex in vivo system. For this reason, in silico (molecular docking combined with umbrella sampling simulation) and in vivo (UHPLC—pharmacokinetics, toxicokinetics; acetylcholinesterase reactivation and functional observatory battery) methods were used. Based on our results, cucurbit[7]urils affect multiple factors in organophosphates poisoning and its therapy by (i) scavenging paraoxon and preventing free fraction of this toxin from entering the brain, (ii) enhancing the availability of atropine in the central nervous system and by (iii) increasing oxime passage into the brain. In conclusion, using cucurbit[7]urils with oximes might positively impact the overall treatment effectiveness and the benefits can outweigh the potential risks.     

Microporous membranes prepared from blends of polysulfone and sulfonated poly(2,6‐dimethyl‐1,4‐phenylene oxide)

Membranes were prepared from solutions containing Udel‐type polysulfone (PSf) and sulfonated poly(2,6‐dimethyl‐1,4‐phenylene oxide) (SPPO). Polymer solutions in 1‐methyl‐2‐pyrrolidone were cast on a nonwoven textile and precipitated in a water bath. The permeabilities and selectivities of the prepared membranes depended on the concentrations of both polymers in the casting solution. The higher the concentration of PSf, the lower were the permeabilities to water and average pore sizes of the membranes. On the other hand, a very small amount of SPPO in the casting solution (about 1–4 wt % relative to the casting solution weight) brought about a considerable increase in water permeabilities and had a small influence on the average pore sizes. The effects were most pronounced if SPPO with a degree of sulfonation of 20–40% was used. The considerable increase in water permeabilities was explained by separation of the PSf and SPPO phases during precipitation in water and by the concentration of hydrophilic SPPO on the surface of the membrane and its pores. The determinations of the oriented concentration potentials proved the presence of a negative surface charge in the membranes. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 134–142, 2001     

Dual-phase polyphenylene oxide membranes with copolyimide branched modifiers

Poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) membranes are attractive due to high permeability for gases; however, the selectivity of these membranes is insufficient. In this work, the gas selectivity was improved without significant loss of the permeability. For this purpose, PPO was modified via incorporation of the branched copolyimide filler–grafted copolyimide (PI-g-PMMA) with polymethyl methacrylate (PMMA) side chains. Two series of mixed self-supporting PPO/PI-g-PMMA films (with variation of the filler content) were prepared and studied as gas separation membranes. The length of the polymide (PI) chain and the density of PMMA grafting were the same in both series, however, in one series the grafted chains contained 50 MMA units, and in the other 150 units. The intermolecular interactions between the PPO matrix and the PI-g-PMMA fillers were investigated using viscometry, infrared (IR) spectroscopy, and scanning electron microscopy. The compatibility of the polymer components is limited; however, for both series, the contents of the respective filler are found, which ensures phase segregation only in a microscale. Therefore, the mechanical properties of the films allow their use as gas separation membranes. It is shown that the degree of the segregation as well as the mechanical and gas transport properties of the membranes depend on the length of the PMMA chains, and the membranes with filler-containing shorter branches (50 MMA units) show better selectivity.     

A hybrid technique for blind separation of non-gaussian and time-correlated sources using a multicomponent approach.

Blind inversion of a linear and instantaneous mixture of source signals is a problem often encountered in many signal processing applications. Efficient fastICA (EFICA) offers an asymptotically optimal solution to this problem when all of the sources obey a generalized Gaussian distribution, at most one of them is Gaussian, and each is independent and identically distributed (i.i.d.) in time. Likewise, weights-adjusted second-order blind identification (WASOBI) is asymptotically optimal when all the sources are Gaussian and can be modeled as autoregressive (AR) processes with distinct spectra. Nevertheless, real-life mixtures are likely to contain both Gaussian AR and non-Gaussian i.i.d. sources, rendering WASOBI and EFICA severely suboptimal. In this paper, we propose a novel scheme for combining the strengths of EFICA and WASOBI in order to deal with such hybrid mixtures. Simulations show that our approach outperforms competing algorithms designed for separating similar mixtures.     

Channel Estimation Method for OFDM in Low SNR Based on Two-dimensional Spreading

In this paper, we present a channel estimation method based on two-dimensional signal spreading applicable to orthogonal frequency multiple access multicarrier systems. Our method exploits a spreading of a transmitted data signal as well as a pilot signal over the assigned frequency range and time period. As a spreading sequence we exploited orthogonal Walsh–Hadamard sequences. When compared with traditional pilot symbol based channel estimation, our method is beneficial in low signal to noise ratio (SNR). For a comparison of our method with state-of-the-art channel estimation method, we utilized an open source LTE downlink simulator developed at TU Vienna. This enables a reproducibility of our results. Considering the LTE system, our method outperforms the traditional approach in typical range of SNR from \(-\) 5 to 10 dB. For a comparison of a throughput performance, a number of channel models has been employed.