Inorganic Electron Transport Materials in Perovskite Solar Cells

In the past decade, the perovskite solar cell (PSC) has attracted tremendous attention thanks to the substantial efforts in improving the power conversion efficiency from 3.8% to 25.5% for single-junction devices and even perovskite-silicon tandems have reached 29.15%. This is a result of improvement in composition, solvent, interface, and dimensionality engineering. Furthermore, the long-term stability of PSCs has also been significantly improved. Such rapid developments have made PSCs a competitive candidate for next-generation photovoltaics. The electron transport layer (ETL) is one of the most important functional layers in PSCs, due to its crucial role in contributing to the overall performance of devices. This review provides an up-to-date summary of the developments in inorganic electron transport materials (ETMs) for PSCs. The three most prevalent inorganic ETMs (TiO₂, SnO_2, and ZnO) are examined with a focus on the effects of synthesis and preparation methods, as well as an introduction to their application in tandem devices. The emerging trends in inorganic ETMs used for PSC research are also reviewed. Finally, strategies to optimize the performance of ETL in PSCs, effects the ETL has on J–V hysteresis phenomenon and long-term stability with an outlook on current challenges and further development are discussed.     

Manipulation of thick-walled PEEK bushing crystallinity and modulus via instrumented compression molding

An instrumented hot compression molding apparatus was fabricated to allow real-time monitoring and precise temperature control during the compaction and consolidation of large polyether ether ketone (PEEK) products. The objective was to determine the impact of controlled variables on the properties of the molded article. Four different strategies were designed to control the mold thermal profiles. The average crystallinity in a commercial molding process is restricted due to large thermal masses with low thermal conductivity. In contrast, this research was able to reduce the crystallinity range from 33% to 6% by developing a special controlled apparatus and implementing new processing methodologies. In this study, PEEK showed a significant increase in the modulus compared to typical values measured on commercially produced analogs, and a higher degree of property uniformity. In a single commercially molded PEEK billet, compressive modulus variability was 13% at room temperature, and 21% at 225°C. Properties of billets produced using the laboratory apparatus showed a reduction in variability to 2%.     

Development and comparison of loop-mediated isothermal amplification and quantitative polymerase chain reaction assays for the detection of Mycoplasma bovis in milk

Bovine mastitis is an economic burden for dairies worldwide. Mycoplasma species, and especially Mycoplasma bovis, are among the most important causative agents, and rapid, precise, and low-cost methods for Mycoplasma detection are urgently needed. For this purpose, loop-mediated isothermal amplification (LAMP) and quantitative PCR (qPCR) assays were developed and compared. The LAMP assay was designed and primer concentrations optimized to M. bovis oppD, encoding oligopeptide permease D. For qPCR, a Taqman assay (Applied Biosystems, Carlsbad, CA) targeting M. bovis gltX, encoding glutamate transfer RNA ligase, was optimized for primer concentration, annealing temperature, and DNA polymerase. Both assays were similarly sensitive, with a detection limit of approximately 10⁴ to 10⁵ M. bovis cells/mL. Both assays were also successful in confirming M. bovis identity in laboratory culture suspensions and in bovine milk. The LAMP and qPCR assays combined with the MoBio DNA extraction kit (MoBio Laboratories Inc., Carlsbad, CA) resulted in the correct detection of 13 out of 13 M. bovis isolates and 14 out of 16 M. bovis-positive milk samples collected from commercial dairies in California. When combined with the PrepMan Ultra reagent (Applied Biosystems), the qPCR assay resulted in confirming 21 out of 21 M. bovis-positive milk samples. Comparison of the assays to milk containing either Mycoplasma arginini, Mycoplasma bovigenitalium, Mycoplasma californicum, M. alkalescens, or Acholeplasma laidlawii or milk lacking any detectable Mycoplasma species or relatives resulted in 3 out of 17 (LAMP with MoBio), 1 out of 17 (qPCR with MoBio), and 2 out of 36 (qPCR with PrepMan Ultra) false positives. Overall, the qPCR assay was more robust than LAMP and could be used on DNA recovered from milk prepared with the PrepMan Ultra reagent, a method that does not include a DNA purification step. The use of this qPCR method enables M. bovis detection in bovine milk in 40 to 55 min, and therefore provides new opportunities to accelerate and simplify M. bovis detection in unpasteurized milk to reduce the incidence of M. bovis mastitis outbreaks.     

Comparative Assay of Antioxidant Packages for Dimer of Estolide Esters

A series of 26 different antioxidants and commercial antioxidant packages designed for petroleum‐based materials, containing both natural and synthetic‐based materials, were evaluated with dimeric coconut‐oleic estolide 2‐ethylhexyl ester (2‐EH), a bio‐based material. The different antioxidants were categorized into different classes of phenolic, aminic, and blended/others materials. The oxidation onset temperatures (OT) using non‐isothermal pressurized differential scanning calorimetry (PDSC) were measured and recorded under previously reported standard conditions. The aminic series gave the best resistance to oxidation as defined by the PDSC method with OT of 246.6 and 244.7 °C for the best two performers, which was a 38 °C improvement over the uninhibited or unformulated dimer estolide material. The phenolic series, containing most of the naturally occurring antioxidants, was the least successful formulation package for the dimer estolide. The blended/other materials, which were specifically designed for petroleum‐based lubricants, did not have the best OT, since the estolides and other bio‐based materials interact differently than their petroleum counterparts. A number of potential antioxidants have been identified as useful additives for the estolides esters. The OT of the estolide and formulated materials correlated well with other bio‐based materials such as biodiesel.     

The Riverside and Berwyn experience: Contrasts in landscape structure, perceptions of the urban landscape, and their effects on people

Humans not only structure the landscape through their activities, but their perceptions of nature are affected by the spatial and temporal arrangements (structure) in the landscape. Our understanding of these interactions, however, is limited. We explored the relationship between landscape structure and peoples’ perceptions of nature in the Chicago, IL, USA, suburbs of Riverside and Berwyn because they offer contrasting paradigms of an urban landscape. Designed in the 1800s by Frederick Law Olmsted, Riverside has several unique design elements (curvilinear streets, ample setbacks, parkways of variable width with mowed grass and naturalistic groupings of trees) that define the structure and composition of this landscape. The urban forest was the keystone of Olmsted's desire to create a harmonious community characterized by “refined sylvan beauty”. In contrast, the adjacent community of Berwyn has right-angled streets with small lots and narrow setbacks for houses. Differences in landscape structure between the two communities produced differences in the diversity, size, and composition of woody vegetation. As measured by patch-size distribution, Riverside had greater diversity in landscape structure than Berwyn, and in turn, Riverside had greater diversity in the composition and size of the woody vegetation compared to Berwyn. Riverside tended toward a “natural” appearance with vegetation, while yards in Berwyn tended to be trimmed and edged. Significant differences between the mean ratings of Riverside and Berwyn respondents were found for six of seven community attribute categories. Riverside participants reported receiving greater benefit from the visual and nature-related features of the urban forest than did Berwyn respondents. Berwyn residents ranked social atmosphere for the community and locomotion (wayfinding) highest among the seven community attribute categories. Despite differences between the two communities, residents valued the green residential environment provided by vegetation. However, the more diverse urban landscape as measured by built structures, woody vegetation, and lot size and shape proved to be more satisfying to the residents of these two communities. The design concepts developed and implemented by Olmsted more than century ago in Riverside are still relevant to city planners striving to develop living environments that are satisfying to urban and suburban residents.     

Cigarette characteristics,smoker characteristics,and the relationship to cigarette fires

Data were collected from eight cities on a wide range of cigarette and smoker characteristics for a sample of smokers. Of these, 564 smokers had had fires and were identified through fire department response to those fires, while the other 1,611 smokers had not had fires and were identified through a telephone sample survey of the communities. The characteristics analyzed included those that had shown evidence of a relationship to the risk of a cigarette-initiated fire, either in laboratory studies or in previous statistical analyses of fire experience.The smoker characteristics analyzed were household income, education, age, gender, and race. The cigarette characteristics analyzed were filter, tobacco column length, filter length, circumference, density, amount of tobacco, menthol, citrate, porosity, and pack type. In addition, a variable was used to control for the smoker's city.After controlling for all smoker characteristics and city, logistic regression modeling showed four cigarette characteristics to be significant: filter, filter length, porosity, and type of pack. Filter, filter length, and porosity all affect air intake, which, therefore, appears to be an important physical element in the combustion process associated with risk. Analysis limited to filtered cigarettes only showed the same characteristics to be significant, plus tobacco column length. Extension of the analysis to two-way interaction terms did not change any of the conclusions on which cigarette characteristics are important, but it did indicate that the role of pack type was different for men and women.Sensitivity analyses, shown in the appendix, supported the main conclusions that cigarette characteristics are significant after controlling for smoker characteristics and that the four specific cigarette characteristics—filter, filter length, porosity, and pack—are the ones that are significant. These analyses checked the impact of cluster sampling, sensitivity to missing data on smoker characteristics, and sensitivity to nonfire smoker cases with responses by people other than the smokers themselves.All this means that there are already cigarettes commercially available that exhibit a reduced propensity for ignition when one controls for smoker characteristics.This report was originally written as the final report in June 1993 as part of CPSC-P-91-1147 Contract Cigarette Fire Incident Study that the National Fire Protection Association conducted for the U.S. Consumer Product Safety Commission.Harwood, formerly with the Consumer Product Safety Commission, is retired.     

Groundwater salinisation on atoll islands after storm‐surge flooding: modelling the influence of central topographic depressions

Fresh groundwater lenses (FGLs) are of utmost importance for human survival on small and isolated atolls. This article examines saline damage to atoll FGLs from wave washover caused by storm surge and studies the particular influence of central topographic depressions (CTDs). We model storm surge over atoll islets of contrasting widths (400 and 800 m), both with and without CTDs of various sizes. Three key findings emerge. First, under equilibrium undisturbed conditions, the CTD slightly reduces the size of the FGL compared to atoll islets without this feature. Second, during marine flooding, prior saturated conditions at the base of a CTD impede seawater infiltration into the substrate, thereby limiting saline damage in that location. Third and most crucial, however, the amount of salt accumulated within the CTD is significant, ranging from 2 to 10 times higher than the net subsurface infiltration during the period of the storm inundation.     

Mono‐Estolide Synthesis from trans‐8‐Hydroxy‐Fatty Acids by Lipases in Solvent‐Free Media and Their Physical Properties

Pseudomonas aeruginosa 42A2 is known to produce two hydroxy‐fatty acids, 10(S)‐hydroxy‐8(E)‐octadecenoic and 7,10(S,S)‐dihydroxy‐8(E)‐octadecenoic acids, when cultivated in a mineral medium using oleic acid as a single carbon source. These compounds were purified, 91 and 96 % respectively, to produce two new families of estolides: trans‐8‐estolides and saturated estolides from the monohydroxylated monomer. trans‐8‐estolides were produced by three different lipases (Novozym 435, Lipozyme RM IM and Lipozyme TL IM) with reaction yields between 68.4 ± 2.1 and 94.7 ± 2.4 % in a solvent‐free medium at 80 °C in 168 h under vacuum. Novozym 435 was found to be the most efficient biocatalyst for both hydroxy‐fatty acids with reaction yields of 71.7 ± 2.3 and 94.7 ± 2.4 %, respectively. Moreover, saturated estolides were also produced from a saturated 10(S)‐hydroxy‐8(E)‐octadecenoic. These estolides were chemically and enzymatically synthesized with Novozym 435, under the previous described reaction conditions with yields of 60.7 ± 2.1 and 71.2 ± 2.3 % respectively. Finally, viscosity, glass transition temperature, decomposition temperatures and enthalpies were determined to characterize both types of estolides. Thermal applications for both types of polyesters were improved since glass transition temperatures were lowered and decomposition temperatures were increased, with respect to their corresponding substrates.