Chemical bond characteristics and infrared reflectivity spectrum of a novel microwave dielectric ceramic CaIn2O4 with near-zero τf

Orthorhombic-structured CaIn₂O₄ ceramics with a space group Pca2₁ were synthesized via a solid-state reaction method. A high relative density (95.6 %) and excellent microwave dielectric properties (ε_r ～11.28, Qf = 74,200 GHz, τ_f ～ ?4.6 ppm/°C) were obtained when the ceramics were sintered at 1375 °C for 6 h. The dielectric properties were investigated on the basis of the Phillips–Van Vechten–Levine chemical bond theory. Results indicated that the dielectric properties were mainly determined by the InO bonds in the CaIn₂O₄ ceramics. These bonds contributed more (74.65 %) to the dielectric constant than the CaO bonds (25.35 %). Furthermore, the intrinsic dielectric properties of the CaIn₂O₄ ceramics were investigated via infrared reflectivity spectroscopy. The extrapolated microwave dielectric properties were ε_r ～10.12 and Qf = 112,200 GHz. Results indicated that ion polarization is the main contributor to the dielectric constant in microwave frequency ranges.     

An unsafe behaviour formation mechanism based on risk perception

It is commonly acknowledged that human behaviour is implicated in most safety problems. However, research on the formation mechanism of unsafe behaviour remains incomplete. Risk perception is one of the fundamental issues in risk research, and individual risk perception can be identified as a critical antecedent of human behaviour. This study attempts to construct and test a theoretical model to reveal the formation mechanism of unsafe behaviour based on risk perception. First, to lay a solid foundation for the developed new mechanism, several key concepts about risk perception and unsafe behaviour were explained. Second, the formation mechanism of biases in individual risk perception was developed based on psychological distance theory, and the biases in risk perception were subsequently classified. Lastly, an unsafe behaviour formation mechanism was put forward based on risk perception as an explanatory variable. This study is novel in that it uses psychological distance to explore the formation of biases in individual risk perception. Further, the presented work provides a new approach to understanding and explaining the formation mechanism of human unsafe behaviour.     

磨削表面粗糙度对γ-TiAl合金抗弯强度的影响

为了研究表面加工质量对硬脆性高温合金抗弯性能的影响,对不同磨削表面粗糙度的全片层γ-TiAl(Ti-47.5Al-2.5V-1.0Cr)合金进行了抗弯性能试验,分析了表面粗糙度对其抗弯强度的影响规律。试验结果表明,随着表面粗糙度的增大,全片层γ-TiAl合金的抗弯强度明显降低。结合断裂形貌图分析了全片层γ-TiAl合金组织中裂纹的萌生、扩展及最终发生宏观断裂的方式,全片层γ-TiAl合金裂纹大多起裂于因加工纹理引起的应力集中区域附近的片层间,并优先在层间扩展,最终的断裂形式多为穿层的脆性瞬断。     

一种基于UPFC的安全稳定在线预防控制方法

目前UPFC示范工程中采用防止线路功率越限的控制策略，系统级控制策略尚需进一步研究完善。提出了一种基于UPFC进行安全稳定预防控制的方法，针对电力调度中心在线安全稳定评估中发现的预想故障安全稳定问题，在线路过载和母线电压越限控制灵敏度计算的基础上，获得UPFC线路串联端有功/无功潮流控制以及并联端无功功率控制值并下发执行。某实际电网的算例结果表明，该方法进一步拓展了UPFC系统级功能应用范围。     

SiO2气凝胶隔热保温涂料研究及保温结构优化设计

石油化工行业是国家节能减排重点工程之一，如果相关设备设施保温不当，不仅会造成严重的热量散失，还会对油水分离和输送等产生影响。本文系统介绍了传统的以中空玻璃微珠或陶瓷微珠为主要隔热功能填料的隔热保温涂料的保温机理、性能及其存在的问题；以 SiO₂气凝胶为主要功能填料的新型隔热保温涂料研究现状及研究中的技术难点；针对不同应用环境，开发兼具防腐、防开裂、隔热保温功能的复合保温结构设计。本文为研制新型耐高温、高效水性无机隔热保温涂料的研究提供了参考方向，为隔热保温涂料在石油化工领域的工程应用提供分析。     

防振条约束失效对蒸汽发生器传热管面内流弹失稳的影响研究

根据防振条布置以及面内支承连续失效个数，将防振条面内约束失效分析划分为多种工况，分析了不同工况下面内约束失效对传热管面内模态的影响，采用各位置阻尼在振型函数上进行加权平均的方法计算了各阶模态的阻尼比，进而研究了防振条面内不同约束对传热管面内流弹失稳的影响。分析结果表明，随着面内支承连续失效位置的增多，弯管段面内首阶模态频率不断降低，出现在弯管段的振型越加明显；弯管段面内首阶模态不一定是最大流弹失稳比值出现的模态，最大流弹失稳比值出现模态的振型几乎都出现在弯管段；随着面内支承连续失效位置的增多，面内流弹失稳比值不断增大，当连续3个及以上防振条面内约束失效时，将出现流弹失稳现象。     

2,4-Dichlorophenol molecularly imprinted two-dimensional photonic crystal hydrogels

A novel molecularly imprinted two-dimensional (2-D) photonic crystal hydrogels (MIPH) for sensitive and label-free recognition of 2,4-dichlorophenol (2,4-DCP) was prepared. The 2-D photonic crystal template was fabricated by using air-water interface self-assembly method. And then the template was embedded with molecularly imprinted polymer, which was synthesized with 2,4-DCP as imprinted molecules, dimethyl sulfoxide as solvent, acrylic acid and acrylamide as functional monomers, N,N-methylene bis acrylamide as cross-linker, azobisisobutyronitrile as initiator. The imprinted molecules were removed by 0.01 M ammonia solution. The results indicated that the 2,4-DCP molecularly imprinted 2-D photonic crystal hydrogels has good response and recognition ability to 2,4-DCP. When the molar ratio of cross-linking density of MIPH is 2.3% and the molar ratio of imprinting molecule is 5.0%, the change of Debye ring diameter is the largest. The diameter of Debye ring increased by 7.1 mm when the concentration of 2,4-DCP changed from 0 to 1 × 10⁻⁶ M, and the particle spacing of MIPH reduced 38 nm. In addition, the diameter of the Debye ring hardly changed in the solution of analogues of 2,4-DCP such as, phenol, 2-chlorophenol, 2,4,6-trichlorophenol and so on, indicating that the MIPH has highly sensitivity and specificity.     

Molecular imaging of advanced atherosclerotic plaques with folate receptor-targeted 2D nanoprobes

Vulnerable atherosclerotic plaques are responsible for most cardiovascular diseases (CVDs). Folate receptor (FR) positive activated macrophages were thought to be a prominent component in the development of vulnerable plaque. The objective of this study is to develop folate conjugated two-dimensional (2D) Pd@Au nanomaterials (Pd@Au-PEG-FA) for targeted multimodal imaging of the FRs in advanced atherosclerotic plaques. Pharmacokinetic and imaging studies (single photon emission computed tomography (SPECT), computed tomography (CT) and photoacoustic (PA) imaging) were performed to confirm the prolonged blood half-life and enrichment of radioactivity in atherosclerotic plaques. Strong signals were detected in vivo with SPECT, CT and PA imaging in heavy atherosclerotic plaques, which were significantly higher than those of the normal aortas after injection of Pd@Au-PEG-FA. Blocking studies with preinjection of excess FA could effectively reduce the targeting ability of Pd@Au-PEG-FA in atherosclerotic plaques, further demonstrating the specific binding of Pd@Au-PEG-FA for plaque lesions. Histopathological characterization revealed that the signal of probe was in accordance with the high-risk plaques. In summary, the Pd@Au-PEG-FA has favorable pharmacokinetic properties and provides a valuable approach for detecting high-risk plaques in the presence of FRs in atherosclerotic plaques.

     

燃煤锅炉除尘专用滤料的开发

介绍机械制造厂燃煤锅炉的烟尘特点,分析滤料失效的原因,提出一套针对该工况的滤料解决方案。介绍针对复杂工况条件所选用的纤维种类以及复合面层原料成分配比的确定,最终选用针刺工艺加工并对该新产品的基本性能进行了测试分析。