Direct Observation of Pure Cu and Cu-Ag Anode Passivation in H2SO4-CuSO4 Aqueous Solution by Channel Flow Double Electrode and Optical Microscopy

Metallurgical and Materials Transactions B - The dissolution and passivation of pure Cu and Cu-5 wt pct Ag anodes in H2SO4-CuSO4 electrolyte were investigated by a direct...     

Carbon radicals generated by solid polymers: Electron spin resonance spectroscopy for detection of species in water

Radicals generated in plastic medical devices (solid phase) by γ-rays or electron-beam irradiation during sterilization are known to cause oxidation of protein drugs, resulting in a loss or reduction in drug efficacy. The generation of radical species in water by the radical species in solid polymers has not been proved. Using electron spin resonance (ESR) spectroscopy, we confirm the generation of new radicals in water by γ-ray irradiated cyclic olefin polymers (COP). ESR measurements are obtained using 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPOL) as a spin probe and 5-(2,2-dimethyl-1,3-propoxycyclophosphoryl)-5-methyl-1-pyrroline N-oxide (CYPMPO) as a spin trap, in which the irradiated COP was immersed. The ESR signals indicate the TEMPOL radicals decline over time, suggesting the generation of new radicals. Conversely, the characteristic ESR signals of the adduct formed by the reaction between CYPMPO and the hydroxyl radical are observed. Thus, hydroxyl radicals are generated because of the migration of the radicals from COP to water. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48604.     

Multifaceted Mechanisms of Action of Metformin Which Have Been Unraveled One after Another in the Long History

While there are various kinds of drugs for type 2 diabetes mellitus at present, in this review article, we focus on metformin which is an insulin sensitizer and is often used as a first-choice drug worldwide. Metformin mainly activates adenosine monophosphate-activated protein kinase (AMPK) in the liver which leads to suppression of fatty acid synthesis and gluconeogenesis. Metformin activates AMPK in skeletal muscle as well, which increases translocation of glucose transporter 4 to the cell membrane and thereby increases glucose uptake. Further, metformin suppresses glucagon signaling in the liver by suppressing adenylate cyclase which leads to suppression of gluconeogenesis. In addition, metformin reduces autophagy failure observed in pancreatic β-cells under diabetic conditions. Furthermore, it is known that metformin alters the gut microbiome and facilitates the transport of glucose from the circulation into excrement. It is also known that metformin reduces food intake and lowers body weight by increasing circulating levels of the peptide hormone growth/differentiation factor 15 (GDF15). Furthermore, much attention has been drawn to the fact that the frequency of various cancers is lower in subjects taking metformin. Metformin suppresses the mechanistic target of rapamycin (mTOR) by activating AMPK in pre-neoplastic cells, which leads to suppression of cell growth and an increase in apoptosis in pre-neoplastic cells. It has been shown recently that metformin consumption potentially influences the mortality in patients with type 2 diabetes mellitus and coronavirus infectious disease (COVID-19). Taken together, metformin is an old drug, but multifaceted mechanisms of action of metformin have been unraveled one after another in its long history.     

Precipitation recovery of boron from wastewater by hydrothermal mineralization

It is well known that boric acid exhibits various toxic effects on plant, animal and human beings even at very low concentrations. Thus, the development of boron-removal technique from wastewater has been intensively investigated. In this study, a new hydrothermal treatment technique was developed to recover boron as recyclable precipitate Ca(2)B(2)O(5).H(2)O from aqueous solutions. As a result, it was found that the hydrothermal treatment using calcium hydroxide as a mineralizer converted boron in the aqueous media effectively into calcium borate, Ca(2)B(2)O(5).H(2)O. In the optimal hydrothermal condition, more than 99% of boron was collected from the synthetic wastewater of 500 ppm. Thus, the present hydrothermal treatment in the presence of calcium hydroxide is recommended as one of the effective techniques to recover boron from aqueous media.     

Achievable working range for solid all-desiccant air-conditioning systems under specific space comfort requirements

Solid desiccant air-conditioning systems present a promising solution, in terms of performance level and environmental protection, pointing out their potential to be coupled with thermal solar or waste heat energy source. Nevertheless, these systems are characterized by constraints to the load they can satisfy, through the trade-off between the dehumidification cooling capacity and the latent load of the conditioned space. On that level, one has to note that, for steady environmental conditions, the conditioned space does not present unique value of load, but range of load, corresponding to an array of acceptable temperature and (usually relative) humidity values. In this work a methodology is proposed for the definition of the system's achievable working range under specific set of space (comfort) requirements. Through this approach, the systems present greater potential for covering the space requirements, thus presenting more possibilities on a design basis, and more flexible control strategies, as well. The proposed methodology is presented and discussed through the case study of a solar desiccant air-conditioning system coupled to a typical residential building.     

Rapid Reconstitution of Biosynthetic Machinery for Fungal Metabolites in Aspergillus oryzae: Total Biosynthesis of Aflatrem

Reconstitution of the biosynthetic machinery for fungal secondary metabolites in Aspergillus oryzae provides an opportunity both for stepwise determination of the biosynthetic pathways and the total biosynthesis of fungal natural products. However, to maximize the utility of the reconstitution system, a simple and rapid strategy for the introduction of heterologous genes into A. oryzae is required. In this study, we demonstrated an effective method for introducing multiple genes involved in the biosynthesis of fungal metabolites by using the expression vectors pUARA2 and pUSA2, each of which contains two cloning sites. The successful introduction of all the aflatrem biosynthetic genes (seven genes in total) after two rounds of transformation enabled the total biosynthesis of aflatrem. This rapid reconstitution strategy will facilitate the functional analysis of the biosynthetic machinery of fungal metabolites.     

Optimization of optical single sideband configurations for radio over fiber transmission and multi-type data communication over a DWDM link

Two new optical single side band (OSSB) configurations for radio frequency (RF) transmission of data are proposed based on the structures that have been designed for baseband digital data transmission. The performances of these schemes are evaluated based on the relevant eye diagrams and bit error rate (BER). The proposed configurations are studied and analyzed mathematically. Eye diagrams and BER’s indicate an acceptable performance for the suggested structures. Feasible settings for the RF electrical power of the links are considered and the link performance for each setting is evaluated. A 4-dense wavelength division multiplexing (4-DWDM) link is considered for transmitting different types of data over a single mode fiber (SMF). Baseband digital data in the format of OSSB and RF-OSSB signals are transmitted over a 4-DWDM link. Furthermore, the link performance is considered for different electrical power settings of OSSB signal in order to achieve efficient transmission for DWDM network.     

Computer-aided activity planning (CAAP) in large-scale projects with an application in the yachting industry

The present paper provides the schema for an innovative and modular computer-based approach to the planning of activities in large-scale projects. Such projects are characterized by tens of thousands of tasks, which are consequently burdensome and difficult to plan manually. This is true to the point that in many shipyards only a low level of detail is used and poor planning is generally performed. The proposed approach is called computer-aided activity planning (CAAP), and an application in the yachting industry is shown to demonstrate its effectiveness. In particular, the so-called outfitting planning problem is faced. The CAAP system, taking into account the available shipyard resources and the knowledge on the building rules is able to automatically define, sequence, and schedule the activities of the whole outfitting process acting as a “planning configurator”. Moreover, it allows the industry-specific knowledge to be stored, maintained and shared within the (extended) organization. Owing to these “building blocks”, plans can be defined accurately and in a shorter time starting from pre-defined templates, with particular impact on lead times whenever variations to complex projects are needed. Finally, to verify the actual capabilities of the approach, the CAAP was implemented within a prototypical software called NautiCAAP.