Antioxidant and antibacterial activities of a starch film with bioextracts microencapsulated from cactus fruits (Opuntia oligacantha)

Food Science and Biotechnology - The use of unconventional sources is very relevant in the food area. In the present study the development of active films with the addition of bioextract (BE) or...     

Temporary feeding shocks increase the productivity in a continuous biohydrogen-producing reactor

Continuous hydrogen production stability and robustness by dark fermentation were comprehensively studied at laboratory scale. Continuous bioreactors were operated at two different hydraulic retention times (HRT) of 6 and 10 h. The reactors were subjected to feeding shocks given by decreases in the HRT, and therefore the organic loading increases, during 6 and 24 h. Results indicated that the H₂ productivity was significantly improved by the temporary organic shock loads, increasing the hydrogen production rate up to 40%, compared to the rate obtained at the steady-state condition. Besides, it was observed that after the shock load, the stability of the reactor (measured as the hydrogen production rate) was recovered attaining the values observed before the feeding shocks. The bioreactor operated at shorter HRT (6 h) showed better H₂ productivity (17.3?±?1.1 L H₂/L-d) in comparison with the other one operated at 10-h HRT (12.4?±?1.6 L H₂/L-d).     

Short-term dynamics of soil chemical parameters after application of alperujo in high-density drip-irrigated olive groves in Argentina

Two-phase olive oil mills generate a semi-solid waste made of olive pulp, olive stone, and vegetation water commonly called ‘alperujo’. Lack of disposal alternatives drives many Argentinean olive oil producers to apply it directly as soil amendment to the olive orchards. Even though this practice has been widely evaluated in Mediterranean countries, there is little agreement on the environmental impact that it may produce. In this work a surface layer of alperujo was applied to a high-density, drip-irrigated olive orchard, and different parameters were monitored. This report summarises the dynamics of soil chemical properties during the first 200 days after application. The results obtained showed that soil amended with alperujo increased total organic matter (OM), nitrogen (N) and available potassium (K), without affecting soil electrical conductivity (EC), pH and C/N ratio. The results suggest that surface application of alperujo may represent an attractive alternative to disposal under conservationist management. Further research evaluating long term effects on chemical and biological indicators must be performed to ensure the sustainability of alperujo as soil amendment.     

Panoramic view and national identity: two of Santiago de Chile's public spaces in the second half of the nineteenth century

This article shows how the panorama, as a modern form of visualization and representation, became a model for the Santa Lucia Hill and the Cousiño Park, two emblematic projects of Santiago's transformation, carried out by Benjamín Vicuña Mackenna between 1872 and 1875. On the one hand, supported by the height and location of the hill and its pattern of paths and terraces, the Santa Lucia promenade became an effective mechanism for visual control of the city as a whole, as well as a reference to the new urban order that was to be imposed. On the other hand, by proposing a landscape design that served as an urban window into Santiago's geographical surroundings, the Cousiño Park project interpreted the qualities of the panorama from a strongly local sensitivity that highlighted the values of life in contact with nature. The analysis of these two cases will show how the panorama remarkably influenced Santiago's first transformation in the republican era, while representing fundamental values of the emerging national identity.     

Research on seismic resistance and mechanic behavior of reinforced lightweight aggregate concrete walls after high temperature

This study focused on the mechanical behavior of reinforced lightweight aggregate concrete (RLAC) walls under repeated horizontal loads after a standard temperature‐rising fire‐resistance test and compared the specimen walls' ultimate loads, yielding loads, cracked loads, stiffness, and ductility with those of reinforced normal‐weight aggregate concrete (RNAC) walls. Steel reinforcing bar spacing, aggregate types, wall widths, and high temperatures were variables in this study. The experimental results showed that, after the fire‐resistance test, the smaller the steel reinforcing bar spacing of RLAC walls, the higher the yield and ultimate loads, yet the worse the ductility and the hysteresis loop's energy, whereas the greater the width of the wall, the greater the stiffness and the higher the hysteresis loop's energy. The differences in terms of stiffness, ductility, and hysteresis between RLAC walls with and without the fire‐resistance test were insignificant, indicating that RLAC walls do not lose their basic mechanical behavior during a high‐temperature fire. RNAC walls showed, indeed, a significant downward trend for strength and hysteresis after the fire‐resistance test, but the decrease was much less clear for stiffness. Therefore, RLAC walls did show better seismic resistance than RNAC walls under the same testing conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

Displacement bound of beam‐column with time‐dependent boundary constraints

Abstract

A simplified explicit formula for the displacement bounds of the beam‐column subjected to time‐dependent boundary constraints is proposed. The formula is derived by means of removing time dependence from the boundary conditions. The proposed bounds provide a quick estimation of the displacements for problems with complex loading conditions.     

Squeezing spectra from s -ordered quasiprobability distributions: application to dispersive optical bistability

It is well known that the squeezing spectrum of the field exiting a nonlinear cavity can be directly obtained from the fluctuation spectrum of normally ordered products of creation and annihilation operators of the cavity mode. In this article we show that the output field squeezing spectrum can be derived also by combining the fluctuation spectra of any pair of s -ordered products of creation and annihilation operators. The interesting result is that the spectrum obtained in this way from the linearized Langevin equations is exact, and this occurs in spite of the fact that no s -ordered quasiprobability distribution verifies a true Fokker–Planck equation; that is, the Langevin equations used for deriving the squeezing spectrum are not exact. The (linearized) intracavity squeezing obtained from any s -ordered distribution is also exact. These results are exemplified in the problem of dispersive optical bistability.     

Impact of cycling temperatures on Fusarium verticillioides and Fusarium graminearum growth and mycotoxins production in soybean

BACKGROUND: Fusarium graminearum and F. verticillioides are two very important mycotoxigenic species as they cause diverse diseases in crops. The effects of constant and cycling temperatures on growth and mycotoxin production of these species were studied on soybean based medium and on irradiated soya beans. RESULTS: F. graminearum grew better when was incubated at 15, 20 and 15–20 °C (isothermal or cycling temperature) during 21 days of incubation. Maximum levels of zearalenone and deoxynivalenol (39.25 and 1040.4 µg g^?1, respectively) were detected on soya beans after 15 days of incubation and the optimal temperature for mycotoxin production was 15 °C for zearalenone and 20 °C for deoxynivalenol. F. verticillioides grew better at 25 °C in culture medium and at 15/20 °C and 15/25 °C on soybean seeds. Fumonisin B₁ was produced only in culture medium, and the maximum level (7.38 µg g^?1) was found at 15 °C after 7 days of incubation. CONCLUSION: When growth and mycotoxin production under cycling temperatures were predicted from the results under constant conditions, observed values were different from calculated for both species and substrate medium. Therefore, care should be taken if data at constant temperature conditions are to be extrapolated to real field conditions. Copyright © 2012 Society of Chemical Industry     

Effect on the journal impact factor of the number and document type of citing records: a wide-scale study

We studied the effect on journal impact factors (JIF) of citations from documents labeled as articles and reviews (usually peer reviewed) versus citations coming from other documents. In addition, we studied the effect on JIF of the number of citing records. This number is usually different from the number of citations. We selected a set of 700 journals indexed in the SCI section of JCR that receive a low number of citations. The reason for this choice is that in these instances some citations may have a greater impact on the JIF than in more highly-cited journals. After excluding some journals for different reasons, our sample consisted of 674 journals. We obtained data on citations that contributed to the JIF for the years 1998?C2006. In general, we found that most journals obtained citations that contribute to the impact factor from documents labeled as articles and reviews. In addition, in most of journals the ratio between citations that contributed to the impact factor and citing records was greater than 80% in all years. Thus, in general, we did not find evidence that citations that contributed to the impact factor were dependent on non-peer reviewed documents or only a few citing records.