TiO2 thin films using organic liquid materials prepared by Hot-Wire CVD method

TiO₂ thin films prepared by Hot-Wire CVD method have been studied as a protecting material of transparent conducting oxide (TCO) against atomic hydrogen exposures for the fabrications of Si thin film solar cells. It was found that electrical conductivity of the films at room temperature reached a value of 0.4 S/cm. This value is 2-3 orders of magnitude higher than that of TiO₂ films prepared by RF magnetron sputtering and electron-beam evaporation methods in our previous works. The conductivity improvement seems to be partly due to the enlargement of TiO₂ crystallites.     

Dioxin concentrations in the edible parts of Japanese common squid and saury

We examined the concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (dioxin-like PCBs) in muscle and gut tissues from Japanese common squid and saury. These body parts are often eaten in Japan, so it is important to measure their dioxin concentrations and evaluate the risks to consumers. The toxic equivalent (TEQ) concentrations in the squid gut samples (1.0 to 14 pg-TEQ/g fresh weight, n=3) were 50-fold larger than those in the muscle tissues (0.020 to 0.22 pg-TEQ/g fresh weight, n = 3) taken from the same samples. By contrast, the TEQ concentrations in the saury gut samples (0.35 to 0.63 pg-TEQ/g fresh weight, n=3) were only 1.1- to 1.7-fold greater than those in the muscle tissues (0.33 to 0.37 pg-TEQ/g fresh weight, n= 3) from the same samples. The TEQ contents in the squid gut tissues ranged from 60 to 990 pg-TEQ/squid, accounting for about 95% of the total dioxin content of the edible parts of the samples. By contrast, the TEQ contents in the saury gut tissues ranged from 4.4 to 12 pg-TEQ/saury, accounting for less than 25% of the total dioxin content of the edible parts of the samples. These tissues showed comparable PCDD/PCDF-congener and dioxin-like PCB-isomer profiles in both species. The results indicate that squid gut tissues occasionally contain high levels of dioxins, and consumption of this foodstuff could potentially significantly increase the dietary intake of dioxins.     

Evaluation of a nitric acid-based partial-digestion method for selective determination of inorganic arsenic in rice

Arsenic (As) uptake in human occurs via the food chain mainly. The Joint FAO/WHO Expert Committee on Food Additives has established the provisional tolerable weekly intake level for As as an inorganic As (iAs) value, because iAs in food is much more toxic than organic As. In this study, we studied an acid based partial-digestion method for the complete extraction of arsenicals from rice. HPLC/ICP-MS was used to determine the concentration of iAs selectively. The conditions adopted to extract arsenicals from a 0.5 g of finely ground rice sample were addition of 2 mL of 0.15 mol/L nitric acid and heating at 80 degrees C for 2 hr. The LOD and LOQ for iAs were 0.0024 and 0.0079 mg/kg dry weight, respectively. Recovery studies showed good accuracy. When the method was applied to ten short-grain brown rice samples, the iAs concentrations were 0.108-0.227 mg/kg dry weight and the total As concentrations were 0.118-0.260 mg/kg dry weight. Although dimethylarsinic acid was also detected in most samples, the percentage of iAs content in total As content was 62.2-96.3%. Thus, iAs was the principal As species in the short-grain brown rice samples tested.     

Estimation of concentrations of antifungal agents allowed as food additives in foods and their daily intake based on official inspection results in Japan in fiscal year 1998

The mean concentrations and daily intake of four antifungal agents were estimated based on the results of an analysis of 7,005 samples of food obtained in official inspections by Japanese local governments in fiscal year 1998. The mean concentration of diphenyl was 0.0004% of the allowable limit, and those of imazalil, o-phenylphenol, and thiabendazole were 14.0%, 3.5%, and 5.7%, respectively. The daily intakes of these antifungal agents per person, estimated from their concentrations and the daily consumption of the foods, were 0.000326, 1.89, 11.5, and 23.3 micrograms, respectively, and assuming a body weight of 50 kg, the amounts of these antifungal agents consumed were 0.000013%, 0.15%, 0.12%, and 0.47% of the acceptable daily intake, respectively. These values are similar to the values obtained on the basis of the results of the official inspection in fiscal years 1994 and 1996, except that the amount of diphenyl is much lower (1/100).     

A histochemical method using a substrate of beta-glucuronidase for detection of genetically modified papaya

A histochemical assay for detecting genetically modified (GM) papaya (derived from Line 55-1) is described. GM papaya, currently undergoing a safety assessment in Japan, was developed using a construct that included a beta-glucuronidase (GUS) reporter gene linked to a virus coat protein (CP) gene. Histochemical assay was used to visualize the blue GUS reaction product from transgenic seed embryos. Twelve embryos per fruit were extracted from the papaya seeds using a surgical knife. The embryos were incubated with the substrate 5-bromo-4-chloro-3-indolyl-beta-D-glucuronide (X-Gluc) in a 96-well microtiter plate for 10-15 hours at 37 degrees C. Seventy-five percent of GM papaya embryos should turn blue theoretically. The histochemical assay results were completely consistent with those from a qualitative polymerase chain reaction (PCR) method developed by this laboratory. Furthermore, the method was validated in a five-laboratory study. The method for detection of GM papaya is rapid and simple, and does not require use of specialized equipment.     

Molecular-dynamic simulations of martensitic transformation of cobalt

With a potential-energy function of Co described by the embedded-atom method (EAM), molecular-dynamics (MD) simulations were performed for a series of initial fcc configurations with different types of dislocations or preset hcp embryos. The gliding process of a Shockley dislocation on a closepacked plane has been observed, which starts from the origin of the dislocation and proceeds at a high speed of 280 m/s toward a certain direction. An atom which has been swept by the dislocation line was detected to contribute a displacement close to the Burgers vector of a Shockley dislocation. It is in this way that a new stacking sequence is produced and an hcp lamella grows in the fcc structure. A similar gliding process has been observed in the case where an intrinsic stacking fault is preexisting in the fcc structure. The transformation is, again, toward forming a local hcp region. These results prove that a special dislocation in the fcc structure can act as an embryo of the hcp, as described in many dislocation mechanisms of the martensitic transformation. The fcc → hcp phase-tranformation process of Co has been further reproduced by a simulation initiated from an fcc/hcp two-phase configuration. It yields a single hcp crystal as the final transformed product.     

Ion beam modification of TiO2 films prepared by Cat-CVD for solar cell

The effects of nitrogen ion bombardment on TiO₂ films prepared by the Cat-CVD method have been studied to improve the optical and electrical properties of the material for use in Si thin film solar cells. The refractive index n and the dark conductivity of the TiO₂ film increased with irradiation time. The refractive index n of the TiO₂ film was changed from 2.1 to 2.4 and the electrical conductivity was improved from 3.4 × 10^− 2 to 1.2 × 10^− 1 S/cm by the irradiation. These results are due to the formation of Ti-N bonds and oxygen vacancies in the film.     

Modeling of debris cooling with annular gap in the lower RPV and verification based on ALPHA experiments

For severe accident assessment in a light water reactor, heat transfer models in a narrow annular gap between the overheated core debris and the reactor pressure vessel (RPV) are important for evaluating RPV integrity and emergency procedures. Using existing data, the authors developed heat transfer models on the average critical heat flux (CHF) restricted by countercurrent flow limitation (CCFL) and local boiling heat fluxes, and showed that the average CHF depended on the steam–water flow pattern in the narrow gap and that the local heat fluxes were similar to the pool boiling curve. We evaluated the validity of heat transfer models by simple calculations for ALPHA experiments performed at Japan Atomic Energy Research Institute. Calculated results showed that heat fluxes on the crust surface were restricted mainly by thermal resistance of the crust after the crust formation, and emissivity on the crust surface did not have much effect on the heat fluxes. The calculated vessel temperature during the heat-up process and peak vessel temperature agreed well with the measurements, which confirmed the validity of the average CHF correlation. However, the vessel cooling rate was underestimated mainly due to underestimation of the gap size.     

Contamination levels of PCDDs, PCDFs and Co-PCBs in commercial baby foods in Japan

To examine dioxin contamination in commercial baby foods in Japan, congener analyses of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and coplanar polychlorinated biphenyls (Co-PCBs) were performed on 102 varieties of baby foods obtained from supermarkets in 2001-2002. The toxic equivalent quantity (TEQ) levels for dioxins in samples ranged from < 0.001 to 0.135 pg-TEQ/g wet weight when undetected or trace levels of congeners were taken as zero. Among 102 samples tested, 26 samples exceeded 0.010 pg-TEQ/g. The highest TEQ value was for "sardine, vegetables" (0.135 pg-TEQ/g), followed by "Japanese radish (daikon), sardine" (0.080 pg-TEQ/g). Thus, dioxins were detected at low levels in baby foods containing animal products such as fishes and/or dairy products.