Deoxidation of Ti Melt by Newly Developed Two-Step Plasma Arc Melting Process Using Hydrogen

Metallurgical and Materials Transactions B - A two-step plasma arc melting process, comprising a first step under Ar-30 pct H2 gas flow and the second step under Ar gas flow, has been...     

Effect of ceria addition on NiRu/CeO2Al2O3 catalysts in steam reforming of acetic acid

NiRu bimetallic catalysts with different amount of CeO₂ loaded on the γ-Al₂O₃ support were prepared. The properties of catalysts were characterized by means of N₂ adsorption-desorption, XRD, H₂-TPR and XPS techniques. Catalytic activities for the steam reforming of acetic acid over these catalysts were investigated at the temperature range from 650 °C to 750 °C. The addition of CeO₂ dramatically improved the activity and stability of the catalyst. Among these catalysts, the NiRu/10CeAl catalyst showed the highest catalytic activity as well as a good stability owing to the abundant Ce³⁺ on the surface of catalyst. The existence of Ce³⁺ promoted the formation of CO₂ from CO because of the mobilizable oxygen, which was favorable for the formation of hydrogen. The coke amount and species deposited on the catalysts after the activity tests were analyzed by DTG. As expected, the NiRu/10CeAl catalyst showed the best resistance to carbon formation. The temperature stepwise steam decoking experiment of the spent catalysts was conducted to elucidate the relationship between the existence of Ce³⁺ and the decoking abilities of various catalysts. It was verified that the existence of Ce³⁺ significantly promoted the decoking abilities of the catalysts.     

Shock-consolidated TiO2 bulk with pure anatase phases fabricated by explosive compaction using underwater shockwave

Titanium dioxide (TiO₂) bulk with pure anatase phases was fabricated by an explosive compaction technique using an underwater shockwave. Dynamic shock pressure of 6 GPa was used to consolidate anatase TiO₂ powders. Its microstructural, crystalline structural and photocatalytic characteristics were observed and measured by various techniques, such as X-ray diffraction (XRD), scanning electron microscopy (SEM) and photocatalytic activity measurement system. It was confirmed that the relative density of anatase TiO₂ compact is about 96% (3.73 g/cm³) of the theoretical density (3.89 g/cm³) and a strong surface bonding between particles is formed by a shock energy. In X-ray diffraction analysis, high purity anatase phases, broadened peaks due to lattice defects and decreased crystallite size were found. For the photocatalytic activities, the anatase TiO₂ compact was quite excellent compared to the commercial sintered TiO₂ bulk.     

Progress in ECRF antenna development for JT-60SA

Structural, mechanical and optical design work on antennas/launchers for the electron cyclotron range of frequency heating and current drive system in JT-60 Super Advanced (JT-60SA) have been advanced based on a linear motion antenna concept. A CAD model of the launcher was built with realistic component sizes. A mock-up of the steering structure consisting of two different bellows sections for poloidal and toroidal beam scanning was fabricated to test movement of the bellows. The poloidal (?40° to +20°) and toroidal (?15° to +15°) injection angle ranges required in JT-60SA were shown to be realized by this steering structure and mirrors.     

Effects of the Hydroxylation Patterns and Degrees of Polymerization of Condensed Tannins on their Metal-Chelating Capacity

Abstract

We studied the effects of the hydroxylation patterns and the degrees of polymerization of condensed tannins on their metal-chelating capacity. These effects were evaluated by the relative stability of aluminium complexes with proanthocyanidin. The relative stability of aluminium complexes was determined qualitatively in methanol solution by the competition with the metallochromic reagent (chrome azurol S). A comparison of these capacities indicates the following results: 1) phenolic hydroxy groups in tannins are essential sites for the chelation with metal. 2) the sites of tannins interacting with metal ions are mainly o-dihydroxyphenyl groups in B-ring. 3) increasing degrees of polymerization of tannins tends to increase the relative stability of condensed tannin-aluminium chelate.     

Uniformity of gallium doped zinc oxide thin film prepared by pulsed laser deposition

Recently, transparent conducting oxide thin films have attracted attention for the application to transparent conducting electrodes. In this work, we evaluated the uniformity of electrical, optical and structural properties for gallium doped zinc oxide thin films prepared on the 10 × 10 cm² silica glass substrate by pulsed laser deposition. The resistivity, carrier concentration, mobility, bonding state and atomic composition of the film were uniform along in-plane and depth direction over the 10 × 10 cm² area of the substrate. The film showed the average transmittance of 81-87%, resistivity of 1.4 × 10^− 3 Ω cm, carrier concentration of 9.7 × 10²⁰/cm³ and mobility of 5 cm²/Vs in spite of the amorphous X-ray diffraction pattern. The gradual thickness distribution was found, however, the potential for large-area and low temperature deposition of transparent conducting oxide thin film using pulsed laser deposition method was confirmed.     

Time dependent changes occurring in rat liver microsomes upon lipid peroxidation

Steady-state fluorescence anisotropy of diphenylhexatriene and n-(9-anthroyloxy)stearic acids (n=2,12) in rat liver microsomes showed a marked increase in the early stages of enzymatically or non-enzymatically induced lipid peroxidation. The changes in fluorescence anisotropy occurred in parallel with the formation of thiobarbituric acid-reactive substances (TBA-RS). Parallel to these changes, the fluorescence emitted from peroxidized microsomes increased markedly in the early stages of lipid peroxidation. In contrast to the changes in the fluorescence anisotropy and in the formation of TBA-RS, the fluorescence showed a continuing increase over the three hr period of lipid peroxidation. Glucose-6-phosphatase was inactivated in the early stages of lipid peroxidation, whereas NADH-cytochrome b₅ reductase underwent a slow deactivation over three hr. The apparently slow deactivation of the peripheral protein may be explained by the formation of fluorescent substances.     

Environmental stress cracking of poly(acrylonitrile-butadiene-styrene)

The environmental stress cracking (ESC) of acrylonitrile-butadiene-styrene (ABS) copolymer caused by a non-ionic surfactant (poly-oxyethylene alkylether) was studied by constant-load tensile creep tests and edge crack tension (ECT) tests. The fracture surfaces were investigated by a scanning electron microscope (SEM) and the morphology of the crack tip was investigated by a transmission electron microscope (TEM). It was found that the results of the creep tests performed in the non-ionic surfactant were very different from those performed in air. SEM images of the fracture surfaces showed that there were three different mechanisms of fracture and that specimens had a tendency to rupture by ESC when the stress was small. The results of the ECT tests and the TEM images showed that the change in the mechanism of the fracture was attributable to the change of morphology at the crack tip.     

2D artificial life system using network-type assembly-like language: influence of change in environment with costs of instructions

To unlock the full potential of evolution in digital media, a Tierra-like system using network-type assembly-like language has been constructed. In the system, like Avida, digital creatures, self-replicating programs, live in a discrete 2D torus space and an interaction between creatures is restricted locally. Bearing a genetic network in mind, network structure is introduced. In the previous works, it is shown that the possibility that the network-type model has more potential of evolution than a linear-type model like Avida in a simple environment. In this paper, to study the potential of evolution more precisely, we model the effects of environment other than creatures. As one of the simplest models of such environment, the cost of execution, i.e. executing time, is introduced. The difficult environment to live in costs high to execute instructions, the easy environment does low. In computer experiments, we have investigated the influence of change in environment by analyzing the process of evolution and diversity of the system. Experimental results show that the network-type system keeps more stable diversity than the linear-type system does, even when the environment changes drastically. This indicates the possibility that the network-type system has more potential of evolution than the linear-type system has. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

《最终幻想Ⅺ》的更新系统设计

对于如何提供补丁下载，单机PC游戏开发人员已经是轻车熟路了，这些补丁包里通常包含玩家需要手动更新的数据和二进制文件．但基本上．他们很少会为了补丁下载而创建一个“更新系统”。