Barium titanate‐based nanodielectrics of two chemically recyclable thermosets

In this work was investigated the effect of the addition of barium titanate (BaTiO₃) on electrical properties of two chemically recyclable thermosets, polyhemiaminal (PHA) and polyhexahydro‐s‐triazine (PHT), both fabricated from 4,4′‐oxydianiline (ODA), an ether derivative of aniline and paraformaldehyde. Thermal and mechanical properties as well as chemical recyclability of the two polymers and their nanocomposites/nanodielectrics were also investigated. In addition, a quantitative analysis was conducted of the nanoparticle dispersion in the PHA‐/PHT‐based BaTiO₃‐containing nanocomposites using transmission electron microscopy imaging and the nearest‐neighbor distance index and this index was used to analyze the investigated properties in connection with the proper mechanisms. Regarding the electrical properties for both neat polymers, conductivity values of the order of 10^?8 S m^?1 at 100 Hz were observed and dielectric constant values close to 2.80 for both polymers at 1 kHz. The addition of 0.5 wt% of BaTiO₃ ferroelectric nanoparticles increased by about 44% the dielectric constant (1 kHz) and conductivity (10² Hz) of the PHA‐based nanocomposite. PHA and PHT exhibited glass transition temperature (T_g) values in the range 125–180 °C. An increase of 7 °C in T_g was observed after the incorporation of 0.5 wt% of BaTiO₃ into PHA. Concerning the mechanical properties, values in the range 4.00–4.45 GPa for reduced modulus and 0.30–0.43 GPa for nanohardness for PHA and PHT polymers were observed. Independently of filler content or polymer matrix, both mechanical properties were enhanced after the addition of BaTiO₃. The chemical recycling of PHA/PHT and all nanocomposites in the initial ODA reagent after sulfuric acid treatment was successfully characterized using the NMR and Fourier transform infrared spectroscopic techniques. © 2018 Society of Chemical Industry     

Engineering Gold Nanotubes with Controlled Length and Near‐Infrared Absorption for Theranostic Applications

Important aspects in engineering gold nanoparticles for theranostic applications include the control of size, optical properties, cytotoxicity, biodistribution, and clearance. In this study, gold nanotubes with controlled length and tunable absorption in the near‐infrared (NIR) region have been exploited for applications as photothermal conversion agents and in vivo photoacoustic imaging contrast agents. A length‐controlled synthesis has been developed to fabricate gold nanotubes (NTs) with well‐defined shape (i.e., inner void and open ends), high crystallinity, and tunable NIR surface plasmon resonance. A coating of poly(sodium 4‐styrenesulfonate) (PSS) endows the nanotubes with colloidal stability and low cytotoxicity. The PSS‐coated Au NTs have the following characteristics: i) cellular uptake by colorectal cancer cells and macrophage cells, ii) photothermal ablation of cancer cells using single wavelength pulse laser irradiation, iii) excellent in vivo photoacoustic signal generation capability and accumulation at the tumor site, iv) hepatobiliary clearance within 72 h postintravenous injection. These results demonstrate that these PSS‐coated Au NTs have the ideal attributes to develop their potential as effective and safe in vivo imaging nanoprobes, photothermal conversion agents, and drug delivery vehicles. To the best of knowledge, this is the first in vitro and in vivo study of gold nanotubes.     

Computer modelling and analysis of the photodegradation effect in a-Si:H p-i-n solar cell

Using a previous model, which was developed to describe the light-induced creation of the defect density in the a-Si:H gap states, we present in this work a numerical modelling of the photodegradation effect in the a-Si:H p-i-n solar cell under continuous illumination. We first considered the simple case of a monochromatic light beam with a wavelength λ between 530-540 nm non uniformly absorbed, then the global standard solar spectrum (AM 1.5) illumination is taken into account. The photodegradation is analysed on the basis of the resulting changes in the free carrier's densities, recombination rate, band structure, electrical potential and field, space charge, and current densities. Changes in the cell's external parameters: the open circuit voltage V_oc, the short circuit current density J_sc, the fill factor FF and the maximum power density P_max are also presented.     

Cochlear ablation alters acoustically induced c-fos mRNA expression in the adult rat auditory brainstem

Expression of c-fos mRNA was studied in the adult rat brain following cochlear ablations by using in situ hybridization. In normal animals, expression was produced by acoustic stimulation and was found to be tonotopically distributed in many auditory nuclei. Following unilateral cochlear ablation, acoustically driven expression was eliminated or decreased in areas normally activated by the ablated ear, e.g., the ipsilateral dorsal and ventral cochlear nuclei, dorsal periolivary nuclei, and lateral nucleus of the trapezoid body and the contralateral medial and ventral nuclei of the trapezoid body, lateral lemniscal nuclei, and inferior colliculus. These deficits did not recover, even after long survivals up to 6 months. Results also indicated that neurons in the dorsal cochlear nucleus could be activated by contralateral stimulation in the absence of ipsilateral cochlear input and that the influence of the contralateral ear was tonotopically organized. Results also indicated that c-fos expression rose rapidly and persisted for up to 6 months in neurons in the rostral part of the contralateral medial nucleus of the trapezoid body following a cochlear ablation, even in the absence of acoustic stimulation. This response may reflect a release of constitutive excitatory inputs normally suppressed by missing afferent input or changes in homeostatic gene expression related to sensory deprivation. Instances of transient, surgery-dependent increases in c-fos mRNA expression in the absence of acoustic stimulation were observed in the superficial dorsal cochlear nucleus and the cochlear nerve root on the ablated side.     

A gene for autosomal recessive symmetrical spastic cerebral palsy maps to chromosome 2q24-25

Cerebral palsy has an incidence of approximately 1/500 births, although this varies between different ethnic groups. Genetic forms of the disease account for approximately 1%-2% of cases in most countries but contribute a larger proportion in populations with extensive inbreeding. We have clinically characterized consanguineous families with multiple children affected by symmetrical spastic cerebral palsy, to locate recessive genes responsible for this condition. The eight families studied were identified from databases of patients in different regions of the United Kingdom. After ascertainment and clinical assessment, we performed a genomewide search for linkage, using 290 polymorphic DNA markers. In three families, a region of homozygosity at chromosome 2q24-q25 was identified between the markers D2S124 and D2S148. The largest family gave a maximum LOD score of 3.0, by multipoint analysis (HOMOZ). The maximum combined multipoint LOD score for the three families was 5.75. The minimum region of homozygosity is approximately 5 cM between the markers D2S124 and D2S2284. We have shown that a proportion of autosomal recessive symmetrical spastic cerebral palsy maps to chromosome 2q24-25. The identification of genes involved in the etiology of cerebral palsy may lead to improved management of this clinically intractable condition.     

Percutaneous large-core biopsy of papillary breast lesions

Neisseria meningitidis, Haemophilus influenzae, and Streptococcus pneumoniae possess the ability to cleave human IgA1 antibodies, and all successfully colonize and occasionally invade the human upper respiratory tract. N. meningitidis invades the bloodstream after a period of nasopharyngeal colonization. We directly compared levels of IgA1 protease activity in strains (n=52) derived from the cerebrospinal fluid or blood of patients with meningococcal disease with strains of N. meningitidis obtained from asymptomatic carriers (n=25). IgA1 protease activity was determined by a sensitive semiquantitative ELISA assay. Levels of IgA1 protease activity were significantly higher (P<0.0001) in strains associated with invasive meningococcal disease (98% with detectable activity, mean = 580 mU) than with those obtained from asymptomatic carriers (76% with detectable activity, mean = 280 mU). Despite marked variation in enzyme activity, almost all strains (96%) possessed the gene for IgA1 protease. Given the panmictic population structure of the bacterial isolates investigated, these data, obtained from two groups infected with N. meningitidis, but with markedly different clinical outcomes, provide the first quantitative evidence that IgA1 protease activity is a virulence determinant that contributes to the pathogenic phenotype, and suggest IgA1 protease as a potential target for prophylaxis.