Study on the Ballistic Performance of Multiply Wadded Through-the-thickness Angle-interlock Fabric Reinforced Composites

Applied Composite Materials - The paper presents a study on the ballistic performance of 3D woven wadded through-the-thickness angle-interlock fabrics (TTAI) fabric reinforced composites. Their...     

Discrete‐time sector based hands‐off control for nonlinear system

This article presents a hands‐off control design for discrete‐time nonlinear system with a special type of nonlinear sector termed as “discrete‐time sector.” The design method to define the boundary of a discrete‐time sector is done with control‐Lyapunov function. The generalization of nonlinear system is viewed in the perspective of a comparison function. By means of a proposed sector, a switching control is designed such that no control action is experienced inside the sector thus, saving unnecessary control efforts. However, to study the robustness for discrete‐time system, a hands‐off control is modified to ensure the monotonic decrease in the energy of the system. Finally, the proposed approach is verified with the simulation results.     

地表移动带范围内建构筑物安全可靠性分析

地表建构筑物位于在生产矿山地表开采移动范围内，如果按照一般圈定地表移动范围原则判断建构筑物的安全可靠性，结果是不安全或者预留保安矿柱可保证安全。为分析地表移动带范围内建构筑物安全可靠性，采用FLAC3D软件建立数值模拟模型，对矿区地表移动进行分析研究，并结合建构筑物的破坏等级评判标准，可以更加合理地判断地表移动范围内建构筑物的安全可靠性，对存在相似条件的矿山具有一定的借鉴意义。     

Investigation on the anti-reduction mechanism of Ti4+ in high dielectric constant system Ca0.9La0.067TiO3 by doping with Al2O3

Ca_0.9La_0.067TiO₃ (abbreviated as CLT) ceramics doped with different amount of Al₂O₃ were prepared via the solid state reaction method. The anti-reduction mechanism of Ti⁴⁺ in CLT ceramics was carefully investigated. X-ray diffraction (XRD) was used to analyze the phase composition and lattice structure. Meanwhile, the Rietveld method was taken to calculate the lattice parameters. X-ray photoelectron spectroscopy (XPS) was employed to study the valence variation of Ti ions in CLT ceramics without and with Al₂O₃. The results showed that Al³⁺ substituted for Ti⁴⁺ to form solid solution and the solid solubility limit of Al³⁺ is near 1.11 mol%. Furthermore, the reduction of Ti⁴⁺ in CLT ceramics was restrained by acceptor doping process and the Q × f values of CLT ceramics were improved significantly. The CLT ceramic doped with 1.11 mol% Al₂O₃ exhibited good microwave dielectric properties: ε_r = 141, Q × f = 6848 GHz, τ_f = 576 ppm/°C.     

Finite Element Study on the Influence of Structural Parameters on the Ballistic Performance of 3D Networked Fabrics

Networked fabrics are a type of three-dimensional multilayer fabrics having predetermined interconnections between layers by combining yarns from two adjacent sublayers into one. This paper reports the research on the influence of structural parameters on the ballistic performance of networked fabrics using finite element analysis in parallel with experiment. The widths of separate and combined sections are found to affect the energy absorption (EA) of regular networked fabrics against high-velocity impact. Separate sections of networked fabrics generally outperform combined sections. The optimal width of the separate section is around 9.5 cm for both dense and loose networked fabrics when impacted at the separate section. The optimal width of combined section decreases from 2.38 cm to 1.15 cm with the decrease of weave density in this area. For the studied structural parameters, highest EAs of dense and loose networked fabrics are around 13.3% and 17.1% higher than those of their counterpart layups of dense and loose plain-woven fabrics, respectively. These findings suggest networked fabrics could be engineered to improve the ballistic performance of flexible fabrics.     

综采工作面设备快速回撤工艺探讨

神东煤炭集团柳塔煤矿12123综采工作面回采结束后,实际只用9天时间就完成设备快速回撤工作;本文以12123综采工作面设备回撤为实例,探讨了综采工作面设备回撤新工艺;该工艺可以在其他煤矿进行推广,有较强的应用前景。     

Combating Biofilm Associated Infection In Vivo: Integration of Quorum Sensing Inhibition and Photodynamic Treatment based on Multidrug Delivered Hollow Carbon Nitride Sphere

Recently, quorum sensing (QS) inhibitors (QSIs) have been combined with antibiotics to enhance antibiofilm efficacy in vitro and in vivo. However, targeting QS signals alone is not enough to prevent bacterial infections. Drug resistance and recurrence of biofilms makes it difficult to eradicate. Herein, photodynamic therapy (PDT) is selected to unite QSIs and antibiotics. A synergistically antibiofilm system, which combines QSIs, antibiotics, and PDT based on hollow carbon nitride spheres (HCNSs) is envisaged. First, HCNS provides the multidrug delivering ability, enabling QSIs and antibiotics to be released in sequence. Subsequently, multistage releases sensitize bacteria effectively, potentiating the chemotherapeutic effects of the antibiotics. Finally, the integration of QSIs and PDT not only minimizes the possibility of drug resistance, but also overcomes the problem of limited mass and extension of PDT. Even after 48 h of incubation, the bacterial biofilm is obviously inhibited. And its biofilm disperse efficiency exceeds 48% (compared with QSI‐potentiated chemotherapy group) and 40% (compared with PDT group). Besides, the inhibition of the QS system influences phenotypes related to virulence factor production and surface hydrophobicity, which weaken biofilm invasion and formation. Eventually, this system is applied to disperse bacterial biofilm in vivo. Overall, PDT and QS modulation are devoted to eradicate drug resistance and recurrence of the biofilm.     

固废制备微晶泡沫玻璃的研究进展

为实现固体废弃物的高值化利用，从微晶泡沫玻璃的制备机理、工艺流程及温度制度等方面分析了工业固体废弃物制备微晶泡沫玻璃的可行性，重点论述了金属矿尾矿、赤泥、高炉矿渣、煤矸石、粉煤灰等固体废弃物制备微晶泡沫玻璃的国内外研究进展，并对微晶泡沫玻璃的研究和发展趋势进行了展望。