Comprehensiveness and uniqueness of commercial databases and open access systems

Scientometrics - In this study, scholarly communication systems provided by commercial services and open access systems are examined on the basis of the comprehensiveness and uniqueness of their...     

Enhanced microwave absorption of La0.7Sr0.3MnO3−δ based composites with added carbon black

Composites consisting of carbon black (CB) particles, La_0.7Sr_0.3MnO_3−δ (LSMO) powder, and epoxy resin were prepared for development of a high performance microwave absorber. This study investigated the influence of adding amounts of LSMO powder (60, 70, and 80 wt%) on complex permittivity, complex permeability, and reflection loss for CB (5 wt%)-epoxy composites. The variation of complex permittivity and complex permeability with frequency of the composites was measured by the cavity perturbation technique in the range of 7–14 GHz. It was found that the real part of the complex permittivity increased with increasing LSMO addition and the imaginary part of the complex permeability decreased with increasing frequency. The microwave absorption results indicated that the composite filled with 5 wt% CB particles and 80 wt% LSMO powder had the best absorption performance. The maximum reflection loss was −23.63 dB at 7.87 GHz and the absorbing bandwidth at −10 dB was 1.75 GHz with a matching thickness of 5 mm.     

Characterization of low-temperature solution-processed indium–zinc oxide semiconductor thin films by KrF excimer laser annealing

We have employed KrF excimer laser annealing (ELA) treatment on sol–gel derived indium–zinc oxide (IZO) precursor films to develop a method of low thermal-budget processing. As-coated IZO sol–gel film was dried at 150 °C and then annealed using KrF excimer laser irradiation under ambient air. The laser irradiation energy density was adjusted to 150, 250, 350, and 450 mJ/cm² to investigate the effects of laser irradiation energy density on the microstructure, surface morphology, optical transmittance, and electrical properties of laser annealed IZO thin films. Results of GIXRD and TEM-SAED indicated that the ELA IZO thin films had an amorphous phase structure. The surface characteristics and electrical properties of laser annealed IZO thin films were significantly affected by the laser irradiation energy density. It was found that the dried IZO sol–gel films irradiated with a laser energy density of 350 mJ/cm² exhibited the flattest surface, the highest average optical transmittance in the visible region, and the best electrical properties among all ELA samples.     

Neural classification of SPOT imagery through integration of intensity and fractal information

It is well known that higher dimensional information essentially leads to better accuracy in remotely sensed image classification. This paper is aimed at land cover classification from SPOT-HRV imagery by the integration of multispectral intensity and texture information. In particular, fractal dimensions are extracted using a wavelet transform as image texture. A neural network approach to classification is adopted in this paper. The underlying network is a modified multilayer perceptron trained by a Kalman filtering technique. The main advantages of this network are (1) its non-backpropagation fashion of learning which leads to a fast convergence, (2) a built-in optimization function, and (3) global scale. Saving computer storage space and a fast learning capability are in particular suitable features for remote sensing applications. Correlation analysis was subsequently performed on both the intensity and fractal images. It was found that fractal information significantly improves the discrimination capability of heterogeneous area such as in urban regions, while it slightly degrades accuracy for homogeneous areas, such as open water. The overall classification performance is superior to results obtained using reflectance only. Improvements over heterogeneous areas are demonstrated.     

Mathematical model and tooth surfaces of recess action worm gears with double-depth teeth

In this study, the surface equations of recess action (RA) worm gears with double-depth teeth, generated by a ZN worm-type hob cutter, are proposed. Based on the generation mechanism and the theory of gearing, a mathematical model of a series of worm gears, semi RA, full RA and standard proportional tooth types, with double-depth teeth is developed as the function of design parameters of the ZN worm-type hob cutter. According to the derived tooth surface equations, computer graphs of a series of worm gears with double-depth teeth are plotted. Tooth surface variations of the generated RA worm gears due to the varying pitch line, pressure angle and tooth height of the hob cutter are also investigated.     

A bibliometric analysis and comparison on three information science journals: JASIST,IPM, JOD, 1998–2008

Employing a citation analysis, this study explored and compared the bibliometric characteristics and the subject relationship with other disciplines of and among the three leading information science journals, Journal of the American Society for Information Science and Technology (JASIST), Information Processing and Management and Journal of Documentation. The citation data were drawn from references of each article of the three journals during 1998 and 2008. The Ulrich’s Periodical Directory, Library of Congress Subject Heading, retrieved from the WorldCat, and LISA database were used to identify the main class, subclass and subject of cited journals and books. Quantitative results on the number of JASIST, IPM and JOD literature references, average number of references cited per paper, document type of cited literature and the journal self-citation rate are reported. Moreover, the highly cited journals and books, the main classes and subclasses of cited journals and books in papers of the three journals, the highly cited subjects in journals and books of library and information science were identified and analyzed. Comparison on the characteristics of cited journals and books confirmed that all the three journals under study are information science oriented, except JOD which is library science orientation. JASIST and IPM are very much in common and diffuse to other disciplines more deeply than JOD.     

Application of evolutionary programming for economic dispatch of cogeneration systems under emission constraints

This paper studies the economical operation of cogeneration systems under emission control with NO_x and SO_x from fossil-fueled thermal generation. The emission model is formulated as a function of fuel enthalpy dependent on the emission factor. The objective function includes fuel cost, emission cost, and tie-line energy cost, subject to the use of mixed fuels, operational limits, and emission constraints. An evolutionary programming was adopted to solve this problem. The steams, fuel mix, and generations will be found by considering the time-of-use dispatch between cogeneration systems and utility companies. A real cogeneration system is given to illustrate the proposed method.     

The effect of grain size and aging on hydrogen embrittlement of a maraging steel

Notched tensile tests were conducted under a slow displacement rate to evaluate the influences of grain size and aging on hydrogen embrittlement (HE) of T-200 maraging steel. In addition, an electrochemical permeation method was employed to measure the effective diffusivity (D_eff) and apparent solubility (C_app) for hydrogen of various heat-treated specimens. The results indicated that the aged (482 °C/4 h) specimens comprised of numerous precipitates led to a raised C_app and a decreased hydrogen diffusivity as compared to those of the solution-treated ones. The solution-treated specimens were resistant to gaseous HE, whereas aged specimens were susceptible to it, implying the strength level was the controlling factor to affect the HE susceptibility of the specimens. Nevertheless, all specimens suffered from sulfide stress corrosion cracking (SSCC) severely but to different degrees. The aged specimens were more likely to form intergranular (IG) fractures in H₂S but quasi-cleavage (QC) in H₂. For the solution-treated specimens, a fine-grained structure was susceptible to HE in H₂S and revealed mainly QC that differed from the IG fracture of the coarse-grained one. The fracture mode of the specimens could also be related to the transport path and / or the supply of hydrogen to the plastic zone of notched specimens in hydrogen-containing environments.     

Removing tool marks of blade surfaces by smoothing five-axis point milling cutter paths

Focused on the reverse movements of moving axes along five-axis tool paths, this study presents a procedure of removing a gouge phenomenon on impeller surfaces in five-axis machining. That is, when an impeller of a centrifugal compressor is being cut in finish milling, reverse movements and/or other linearization problems of moving axes along a five-axis interference-free tool path may make a cutter leave tool marks on the impeller surfaces. For generating interference-free cutter location (CL) data needed in rough, semi-finish and finish five-axis cutting processes, first, a simple yet useful approach is proposed. To identify the potential gouge area and to solve the problem for a tool path having reverse motion directions with its moving axes in finish milling, the CL data are further smoothed to remove the reverse movements about its rotating and tilting axes. The effectiveness of this procedure has been experimentally confirmed by successful five-axis finish milling of an impeller without leaving tool marks on its surfaces. In addition, with the spline tool paths, the machining time can be saved up to 23.57%.