A new method for manufacturing nanostructured electrodes on glass substrates

The present paper describes a new method for manufacturing a nanostructured porous layer of TiO₂ on a conducting glass substrate for use in a dye-sensitized photoelectrochemical cell. The method involves deposition of a layer of semiconductor particles onto a conducting substrate and compression of the particle layer to form a mechanically stable, electrically conducting, and porous nanostructured film at room temperature. Photoelectrochemical characteristics and morphology of the resulting nanostructured films are presented. The potential use of the new manufacturing method in the future applications of nanostructured systems is discussed.     

Crystallographic electron microscopy

We present a family of techniques for the transmission electron microscope that generate surface zone-axis patterns. These patterns display the variation of the diffracted-beam intensity as a function of the angle of the incident electrons. The conditions of the experiments are those of reflection high-energy electron diffraction at near grazing incidence. The techniques are: surface convergent-beam diffraction, a surface analogue of the Tanaka method and a modified double-rocking scheme. Experimental results are presented for diffraction from surfaces of MgO and MoS₂. We anticipate that surface zone-axis patterns (surface ZAPs) will become established as an important tool for surface characterization, especially when used in conjunction with high-resolution surface imaging and surface energy loss spectroscopy; surface ZAPs may be expected to play, in surface analysis, a role analogous to that played by convergent-beam diffraction in normal transmission electron microscopy.     

Putting it all together – Formal verification of the VAMP

In the verified architecture microprocessor (VAMP) project we have designed, functionally verified, and synthesized a processor with full DLX instruction set, delayed branch, Tomasulo scheduler, maskable nested precise interrupts, pipelined fully IEEE compatible dual precision floating point unit with variable latency, and separate instruction and data caches. The verification has been carried out in the theorem proving system PVS. The processor has been implemented on a Xilinx FPGA. A shorter version of this article with the title “Instantiating uninterpreted functional units and memory system: functional verification of the VAMP” appeared in [8]. The work reported here was done while all the authors were with Saarland University.     

Bathymetry and siltation rate for Dokan Reservoir,Iraq

The Dokan Reservoir dam is a concrete cylindrical arch with gravity abutments, located on the Lesser Zab River about 60 km from the city of Sulaimani in north‐eastern Iraq. A bathymetric survey was conducted in November 2014 for a period of 10 days, using an echo sounder of 200‐kHz single beam. The survey results indicated an annual average sediment deposition of 3.8 million m³. Thirty‐two sediment samples were collected from the reservoir bed. The ratio of gravel, sand, silt and clay was 15:14:48:23, respectively. The reservoir bed is covered mainly with silt. The sediments are composed of silty clay (77.6%), silty sandy clay (10%), sandy gravely silty clay (1.2%) and gravely sandy silty clay (1%).     

Catalytic Materials for High-Temperature Combustion

Catalytic combustion, as an alternative to conventional thermal combustion, has received considerable attention during the past decade. Research efforts have been promoted by the need to meet governmental demands concerning pollution and the wish to use energy sources more efficiently. The two main advantages offered by catalytic combustors over flame combustors apply to these goals:

1. Catalytic combustion can be carried out over a wide range of fuel concentrations in air and at low temperatures.
2. These low temperatures result in attaining NO, emission levels substantially lower than possible with conventional combustors.

     

Reduction of NOx by H2 on WOx-Promoted Pt/Al2O3/SiO2 Catalysts Under O2-Rich Conditions

This work addresses the reduction of NO_x by H₂ under O₂-rich conditions using Al₂O₃/SiO₂-supported Pt catalysts with different loads of WO_x promotor. The samples were thoroughly characterised by N₂ physisorption, temperature-programmed desorption of CO, scanning electron microscopy, X-ray diffraction, laser raman spectroscopy, X-ray photoelectron spectroscopy and diffuse reflectance infrared fourier transform spectroscopy with probe molecule CO. The catalytic studies of the samples without WO_x showed pronounced NO_x conversion below 200 °C, whereas highest efficiency was related to small Pt particles. The introduction of WO_x provided increasing deNO_x activity as well as N₂ selectivity. This promoting effect was referred to an additional reaction path at the Pt-WO_x/Al₂O₃/SiO₂ interface, whereas an electronic activation of Pt by strong metal support interaction was excluded.

Graphic Abstract

     

Sediment flux from Lesser Zab River in Dokan Reservoir: Implications for the sustainability of long‐term water resources in Iraq

Prudent management of Iraqi water resources under climate change conditions requires plans to be based on actual figures of the storage capacity of existing reservoirs. With the absence of sediment flushing measures, the actual storage capacity of Dokan Reservoir (operated since 1959) has been affected by the amount of sediment delivered during its operational life leading to an undetermined reduction in its storage capacity. In consequence, there has not been an update on the dam's operational storage capacity curves. In this research, new operational curves were established for the reservoir based on a recent bathymetric survey undertaken in 2014. The reduction in reservoir capacity during the period between 1959 and 2014 was calculated by the mean of the difference between the designed storage capacity and the storage capacity which was concluded from the 2014 bathymetric survey. Moreover, the rate of sediment transported to the reservoir was calculated based on the overall quantities of accumulated sediment and the water discharge of the Lesser Zab River into the reservoir. The results indicate that the dam capacity is reduced by 25% due to sedimentation of an estimated volume of 367 million cubic metres at water level 480 m.a.s.l. The annual sedimentation rate was about 6.6 million cubic metres, and the sediment yield was estimated to be 701.2 t?km^?3?year.     

Giving too much social support: social overload on social networking sites

As the number of messages and social relationships embedded in social networking sites (SNS) increases, the amount of social information demanding a reaction from individuals increases as well. We observe that, as a consequence, SNS users feel they are giving too much social support to other SNS users. Drawing on social support theory (SST), we call this negative association with SNS usage ‘social overload’ and develop a latent variable to measure it. We then identify the theoretical antecedents and consequences of social overload and evaluate the social overload model empirically using interviews with 12 and a survey of 571 Facebook users. The results show that extent of usage, number of friends, subjective social support norms, and type of relationship (online-only vs offline friends) are factors that directly contribute to social overload while age has only an indirect effect. The psychological and behavioral consequences of social overload include feelings of SNS exhaustion by users, low levels of user satisfaction, and a high intention to reduce or even stop using SNS. The resulting theoretical implications for SST and SNS acceptance research are discussed and practical implications for organizations, SNS providers, and SNS users are drawn.