Use of X-ray computed microtomography to understand why gels reduce relative permeability to water more than that to oil

X-ray computed microtomography (XMT) was used to investigate why gels reduce relative permeability to water more than that to oil in strongly water-wet Berea sandstone. XMT allows saturation differences to be monitored for individual pores during various stages of oil, water, and gelant flooding. The method also characterizes distributions of pore size, aspect ratio, and coordination number for the porous media. We studied a Cr(III) acetate–HPAM gel that reduced permeability to water (at S_or) by a factor 80–90 times more than that to oil (at S_wr). In Berea, the gel caused disproportionate permeability reduction by trapping substantial volumes of oil that remained immobile during water flooding (i.e., 43.5% S_or before gel placement versus 78.7% S_or after gel placement). With this high trapped oil saturation, water was forced to flow through narrow films, through the smallest pores, and through the gel itself. In contrast, during oil flooding, oil pathways remained relatively free from constriction by the gel.     

A new method for manufacturing nanostructured electrodes on glass substrates

The present paper describes a new method for manufacturing a nanostructured porous layer of TiO₂ on a conducting glass substrate for use in a dye-sensitized photoelectrochemical cell. The method involves deposition of a layer of semiconductor particles onto a conducting substrate and compression of the particle layer to form a mechanically stable, electrically conducting, and porous nanostructured film at room temperature. Photoelectrochemical characteristics and morphology of the resulting nanostructured films are presented. The potential use of the new manufacturing method in the future applications of nanostructured systems is discussed.     

Transformation-toughening in cemented carbides: Part II. Thermomechanical treatments

WC-(Fe, Ni, C) cemented carbides can be successfully transformation-toughened by careful control of binder composition and taking into consideration the effect of thermal residual stress on the transformation characteristics of the binder. An additional degree of control on the metastability of the binder phase can be achievedvia thermomechanical treatments. These treatments consist of transforming an austenitic binder to martensite by cooling in liquid nitrogen followed by a suitable high temperature heat treatment to reaustenitize it. Thein situ deformation of the binder caused by the large shape and volume changes that accompany its transformation to martensite thus provides the mechanical component of the thermomechanical treatment. Subsequent heat treatments not only reaustenitize the binder but also modify its susceptibility to undergo stress-induced transformation. It is shown that the hardness/fracture toughness behavior of WC-(Fe, Ni, C) cemented carbides can be significantly improved by the application of such treatments. A qualitative explanation for the enhancements in fracture toughness provided by thermomechanical treatments is offered based on a careful examination of the changes in phase constitution of the binder that occur during these treatments. Formerly Manager, Research-Development, Reed Tool Company, Houston, TX.     

A detailed analysis of ambipolar diffusion in nanostructured metal oxide films

In this paper a transport equation is derived which describes the behaviour of the nanostructured metal oxide films in a photoelectrochemical cell. It is shown that a detailed analysis of the charge compensation mechanism necessarily leads to a transport equation with characteristics similar to but logically distinct from the pure diffusion equation. The studied phenomenon was named ambipolar diffusion in the early 1950s. It takes into account the fact that the diffusion processes of ions and electrons occur at different speeds. A weak electric field therefore couples the processes together to preserve charge neutrality. The electric field in turn affects the transport resulting in a deviation from purely diffusive behaviour. However, this has not been widely recognised in the literature for nanostructured semiconductor films until very recently. In this paper a detailed analysis is presented. It is based on the assumption that the current density is solenoidal. It is shown that application of the ambipolar diffusion model to a photoelectrochemical cell based on a nanostructured metal oxide film leads to an additional term in the transport equation, rather than only a new diffusion coefficient as in earlier work. It is also shown that the boundary conditions interact closely with the equation to form a transport model.     

"Temporal encoding in fear conditioning revealed through associative reflex facilitation": Correction to Lindquist and Brown (2004).

Reports an error in "Temporal Encoding in Fear Conditioning Revealed Through Associative Reflex Facilitation" by Derick H. Lindquist and Thomas H. Brown (Behavioral Neuroscience, 2004[Apr], Vol 118[2], 395-402). The article contained several errors. On page 396, second paragraph, the sentence beginning on line 6 should read as follows: "Having a stable baseline is critical for studies of reflex facilitation because the experimental designs invariably entail repetitive CR testing, if only to achieve reasonable statistical power (see Choi et al., 2001b; Lindquist & Brown, 2004)." On page 400, the first heading should read as follows: "Comparison of New and Old Reflex Facilitation Procedures." On page 400, the first sentence under the abovementioned heading should read as follows: "We decided not to use the original measure of reflex facilitation, developed by J. S. Brown et al. (1951), because it suffers from severe interpretational limitations, elaborated in detail elsewhere (Choi et al., 2001b; Leaton & Cranney, 1990; Lindquist & Brown, 2004)." (The following abstract of the original article appeared in record 2004-12681-016.) Temporal encoding in Pavlovian fear conditioning was examined through conditional facilitation of the short-latency (Rl) component of the rat eyeblink reflex. Rats were fear-conditioned to a tone conditional stimulus (CS) with either a 3- or 9-s interstimulus interval (ISI) between CS onset and the onset of the grid-shock unconditional stimulus (US). Rl facilitation was tested over 2 days, in counterbalanced order, at a latency of 3 s and 9 s from CS onset. CS-produced Rl facilitation, the conditional response (CR), was 3-4 times larger when the test latency equaled the conditioning ISI. These results, coupled with the known neurophysiology of Rl facilitation, suggest that this CR could disclose differences in the time course of CS-generated output from the amygdala when driven by cortical versus subcortical CS-CR pathways. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Design of simulator training: a comparative study of Swedish dynamic decision-making training facilities

Cognition, Technology & Work - Simulator training is becoming increasingly important for training of time-critical and dynamic situations. Hence, how simulator training in such domains is...     

J. H. Kulick, J. M. Jarem, R. G. Lindquist, S. T. Kowel, and M. W. Friends are with the Department of Electrical and Computer Engineering, University of Alabama in Huntsville, Huntsville, Alabama 35899

The development and modeling of a liquid-crystal phase grating for real-time diffractive three-dimensional displays are discussed. The system being developed, which is called the ICVision system, utilizes a number of ideas that will result in a rugged, low-power three-dimensional display offering both vertical and horizontal parallax and eventually full color. Fringing fields created between interdigitated electrodes formed on top of VLSI die will induce a diffraction pattern in a thin layer of liquid crystal that will cover the die. A detailed electrostatic and diffraction analysis of liquid-crystal phase-grating regions that will make up the final display is given here. The electrostatic analysis is developed by use of the method of moments. The diffraction analysis is developed by use of rigorous coupled-wave diffraction theory. The numerical results obtrained from the mathematical model are compared with experimental diffraction results from preliminary LCD cells that have been assembled as prototype ICVision devices.     

Liquid crystal-on-silicon implementation of the partial pixel three-dimensional display architecture

We report the implementation of a liquid crystal-on-silicon, three-dimensional (3-D) diffractive display based on the partial pixel architecture. The display generates multiple stereoscopic images that are perceived as a static 3-D scene with one-dimensional motion parallax in a manner that is functionally equivalent to a holographic stereogram. The images are created with diffraction gratings formed in a thin liquid crystal layer by fringing electric fields from transparent indium tin oxide interdigitated electrodes. The electrodes are controlled by an external drive signal that permits the 3-D scene to be turned on and off. The display has a contrast ratio of 5.8, which is limited principally by optical scatter caused by extraneous fringing fields. These scatter sources can be readily eliminated. The display reported herein is the first step toward a real-time partial pixel architecture display in which large numbers of dynamic gratings are independently controlled by underlying silicon drive circuitry.     

Matrix-valued Nevanlinna-Pick interpolation with complexity constraint: an optimization approach

Over the last several years, a new theory of Nevanlinna-Pick interpolation with complexity constraint has been developed for scalar interpolants. In this paper we generalize this theory to the matrix-valued case, also allowing for multiple interpolation points. We parameterize a class of interpolants consisting of "most interpolants" of no higher degree than the central solution in terms of spectral zeros. This is a complete parameterization, and for each choice of interpolant we provide a convex optimization problem for determining it. This is derived in the context of duality theory of mathematical programming. To solve the convex optimization problem, we employ a homotopy continuation technique previously developed for the scalar case. These results can be applied to many classes of engineering problems, and, to illustrate this, we provide some examples. In particular, we apply our method to a benchmark problem in multivariate robust control. By constructing a controller satisfying all design specifications but having only half the McMillan degree of conventional H/sup /spl infin// controllers, we demonstrate the advantage of the proposed method.