Multilayer Graphene Broadband Terahertz Modulators with Flexible Substrate

Fabrication of terahertz modulators as simple devices with high modulation depth across a broad bandwidth is still very challenging. In this study, four different chemical vapor deposition grown multilayer graphene (MLG) modulators based on MLG/ionic liquid/gold sandwich structures have been investigated. Flexible substrates (PVC and PE) were chosen as host materials, and devices were fabricated with three different thicknesses. The resultant MLG devices can be operated at low voltages between 0 and 3.4 V providing nearly complete modulation between 0.2 and 1.5 THz with low insertion losses. Even with such low gate voltages, the devices have been doped significantly inducing 7–11-fold improvement in their sheet conductivities depending on device thickness. In addition, sheet conductivity has been improved more than three times as the graphene layer number increased from 30 to 100. With the demonstration of promising device performances, the proposed modulators can be potential candidates for applications in terahertz and related optoelectronic technologies.     

The effect of methyl-tri-n-butylammonium methylsulfate and graphite nanoplates on production of antistatic acrylic polymer

Methyl-tri-n-butylammonium methylsulfate (BIL) was incorporated into acrylic resin to improve antistatic property of acrylic polymer (AP). In order to avoid reduction in the mechanical properties of acrylic film and to reach higher electrical conductivity values, the combination of graphite nanoplates (Gr) and BIL was used. The effects of incorporation of BIL and Gr into AP on UV-blocking properties and UV transmittance data of acrylic films were measured. After 120 days, AP containing 5 wt% BIL and 0.01 wt% Gr, and AP+15 wt% BIL exhibited antistatic property. While BIL incorporation into acrylic resin deteriorated the mechanical properties, 0.01 wt% Gr incorporation increased the tensile strength by 83%.     

Robust microencapsulated phase change materials in concrete mixes for sustainable buildings

For passive building applications, phase change materials (PCMs) are microencapsulated to avoid leakage of PCM from concrete structure. The primary challenge of using microencapsulated PCM (MPCM) is its weak shell structure. New MPCMs with different shell compositions to prevent breakage during mixing in fresh concrete are needed. In this study, free radical polymerization method to microencapsulate capric acid–myristic acid mixture as PCM with two different methyl methacrylate co‐polymers is proposed to produce robust MPCMs for building applications. Two new microcapsules (MPCM‐1 and MPCM‐2) having latent heats of 91.9 and 97.3 J/g were synthesized. SEM analyses showed the size of microcapsules being in the range of 400–850 nm for MPCM‐1 and 250–475 nm for MPCM‐2. Analyses also reveal that the shells of MPCMs were not harmed, as they were added into concrete mixes. The microsphere's geometry was preserved, and distribution was homogeneous. The MPCMs were also studied under thermal tests of 1000 heating/cooling cycles. No significant changes in thermal properties were observed after thermal cycling tests. Copyright © 2016 John Wiley & Sons, Ltd.     

The durability properties of polypropylene fiber reinforced fly ash concrete

This paper reports of a comprehensive study on the durability properties of concrete containing polypropylene fiber and fly ash. Properties studied include unit weight and workability of fresh concrete, and compressive strength, modulus of elasticity, porosity, water absorption, sorptivity coefficient, drying shrinkage and freeze–thaw resistance of hardened concrete. Fly ash content used in concrete mixture was 0%, 15% and 30% in mass basis, and fiber volume fraction was 0%, 0.05%, 0.10% and 0.20% in volume basis.     

The effects of immunological castration against GnRH with recombinant OL protein (Ovalbumin-LHRH-7) on carcass and meat quality characteristics,histological appearance of testes and pituitary gland in Kıvırcık male lambs

The aims of the study were to investigate the effects of immunization against GnRH using OL protein (Ovalbumin-LHRH-7) on feedlot performance, carcass, meat quality and some reproductive traits in K?v?rc?k ram lambs. Ram lambs in the immunization (I, n = 7) group were immunized against GnRH using OL protein and boosted 2 weeks later. Control (C, n = 7) group was not treated. The animals were kept at pasture for 6 weeks after the first immunization, subjected to a 70 day fattening program, and then slaughtered. Growth performance, various carcass and meat quality characteristics were not affected from the immunization. GnRH immunization induced GnRH antibody production, suppressed testosterone production and testicular growth (P < 0.01). Testicular structure was negatively affected from the immunization, but not pituitary. These results suggest that immunization against GnRH with OL could be an alternative castration technique in ram lambs without negatively affecting carcass and meat quality characteristics.     

Influence of activator on the strength and drying shrinkage of alkali-activated slag mortar

The development of new binders, as an alternative to traditional cement, by the alkaline activation of industrial by-products (i.e. ground granulated slag and fly ash) is an ongoing research topic in the scientific community [Puertas F, Amat T, Jimenez AF, Vazquez T. Mechanical and durable behaviour of alkaline cement mortars reinforced with polypropylene fibres. Cem Concr Res 2003;33(12): 2031–6]. The aim of this study was to investigate the feasibility of using and alkaline activated ground Turkish slag to produce a mortar without Portland cement (PC).Following the characterization of the slag, mortar specimens made with alkali-activated slag were prepared. Three different activators were used: liquid sodium silicate (LSS), sodium hydroxide (SH) and sodium carbonate (SC) at different sodium concentrations. Compressive and flexural tensile strength of alkali-activated slag mortar was measured at 7-days, 28-days and 3-months. Drying shrinkage of the mortar was measured up to 6-months. Setting times of the alkali-activated slag paste and PC paste were also measured.Setting times of LSS and SH activated slag pastes were found to be much slower than the setting time of PC paste. However, slag paste activated with SC showed similar setting properties to PC paste.LSS, SH and SC activated slag mortar developed 81, 29, and 36 MPa maximum compressive strengths, and 6.8, 3.8, and 5.3 MPa maximum flexural tensile strengths at 28-days. PC mortar developed 33 MPa compressive strength and 5.2 MPa flexural tensile strength. LSS and SH activated slag mortars were found to be more brittle than SC activated slag and PC mortars.Slag mortar made with LSS had a high drying shrinkage, up to six times that of PC mortar. Similarly, slag mortar made with SH had a shrinkage up to three times that of PC mortar. However, SC activated slag mortar had a lower or comparable shrinkage to PC mortar. Therefore, the use of SC as an activator for slag mortar is recommended, since it results in adequate strength, similar setting times to PC mortar and comparable or lower shrinkage.     

Valuation of expansion flexibility in flexible manufacturing system investments using sequential exchange options

In this paper, a valuation approach that modifies traditional discounted cash flow (DCF) methodology is presented to incorporate the option premium of expansion flexibility while evaluating a flexible manufacturing system investment. Expansion flexibility allows for changing the production capacity in response to deviations in demand, while disregarding the assumption that management makes an irrevocable decision based on its future market expectations. Expansion flexibility provides a key strategic advantage by avoiding the large financial commitment at the initial investment stage and enabling investment in a phased manner according to the changes in market conditions. The aim of this paper is to present a thorough valuation methodology that accounts for both the benefits of keeping the option to expand alive and the loss of market share to competing firms if the expansion investment were delayed. In this paper, the value of expansion flexibility is computed using sequential exchange options. The proposed method employs an analytic approximation scheme for valuing American exchange options on dividend-paying assets. A numerical example demonstrates the application of the valuation framework. The options approach that incorporates the expansion flexibility option into the analysis results in a higher value than the standard DCF approach, which ignores the value of the option to expand. We also perform sensitivity analyses to see whether the expansion option increases in value in cases of high uncertainty where management can respond flexibly to new market information, and where the investment analysis ignoring flexibility yields a marginally positive net present value. The results of the proposed valuation framework are presented in comparison with a previous model that ignores the opportunity cost of delaying expansion investment.     

Thermally exfoliated graphene oxide reinforced fluorinated pentablock poly(l‐lactide‐co‐ε‐caprolactone) electrospun scaffolds: Insight into antimicrobial activity and biodegradation

Three‐dimensional fluorinated pentablock poly(l ‐lactide‐co‐ε‐caprolactone)‐based scaffolds were successfully produced by the incorporation of thermally exfoliated graphene oxide (TEGO) as an antimicrobial agent with an electrospinning technique. In a ring‐opening polymerization, the fluorinated groups in the middle of polymer backbone were attached with a perfluorinated reactive stabilizer having oxygen‐carrying ability. The fiber diameter and its morphologies were optimized through changes in TEGO amount, voltage, polymer concentration, and solvent type to obtain an ideal scaffold structure. Instead of the widely used graphene oxide synthesized by Hummer's method, TEGO sheets having a low amount of oxygen produced by thermal expansion were integrated into the fiber structure to investigate the effect of the oxygen functional groups of TEGO sheets on the degradation and antimicrobial activity of the scaffolds. There was no antimicrobial activity in TEGO‐reinforced scaffolds in the in vitro tests in contrast to the literature. This study confirmed that a low number of oxygen functional groups on the surface of TEGO restricted the antimicrobial activity of the fabricated composite scaffolds. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43490.     

p16/INK4a and p15/INK4b gene methylation and absence of p16/INK4a mRNA and protein expression in Burkitt''s lymphoma

So-called sulfur-turf microbial mats, which are macroscopic white filaments or bundles consisting of large sausage-shaped bacteria and elemental sulfur particles, occur in sulfide-containing hot springs in Japan. However, no thermophiles from sulfur-turf mats have yet been isolated as cultivable strains. This study was undertaken to determine the phylogenetic positions of the sausage-shaped bacteria in sulfur-turf mats by direct cloning and sequencing of 16S rRNA genes amplified from the bulk DNAs of the mats. Common clones with 16S rDNA sequences with similarity levels of 94.8 to 99% were isolated from sulfur-turf mat samples from two geographically remote hot springs. Phylogenetic analysis showed that the phylotypes of the common clones formed a major cluster with members of the Aquifex-Hydrogenobacter complex, which represents the most deeply branching lineage of the domain bacteria. Furthermore, the bacteria of the sulfur-turf mat phylotypes formed a clade distinguishable from that of other members of the Aquifex-Hydrogenobacter complex at the order or subclass level. In situ hybridization with clone-specific probes for 16S rRNA revealed that the common phylotype of sulfur-turf mat bacteria is that of the predominant sausage-shaped bacteria.