Fabrication and characterization of in-situ Al3Ni intermetallic and CeO2 particulate-reinforced aluminum matrix composites

Al-xNi-yCeO₂ (x = 6, 10, 15, 20 and y = 0, 5, 10 wt%) composites were produced by a powder metallurgical production route. Powder mixtures of Al, Ni and CeO₂ were fabricated via mechanical alloying (MA) for 4 h in a Spex-type high-energy ball mill. Both the mechanically alloyed (MAed) and non-MAed (as-blended mixtures) powders were pre-compacted in a hydraulic press under 650 MPa and then pressurelessly consolidated at 630 °C for 2 h under an inert atmosphere. The effects of MA process and the amounts of Ni and CeO₂ on the microstructural, mechanical and tribological properties of the sintered composites were determined. Based on the SEM and XRD investigations, the MAed powders illustrated a homogenous structure, comprising flaky particles with smaller crystallite sizes and greater lattice strain. According to the XRD analysis, Ni formed Al–Ni intermetallic compounds in the matrix of sintered composites that act as secondary reinforcement phases. The SEM observations conducted on the MAed samples demonstrated more uniformly and finely distributed Al₃Ni and CeO₂ phases in the microstructure of the MAed samples, unlike the non-MAed ones. The hardness values of sintered composites increased due to the MA process and increasing Ni and CeO₂ amounts, and the hardness value of the MAed Al20Ni–10CeO₂ sample reached 179 HV. The ultimate compressive strength and failure strain of the MAed Al6Ni–10CeO₂ sample were 441 MPa and 11.3%. In the Al20Ni–10CeO₂ sample, the compressive strength and failure strain were 391 MPa and 5.5%, respectively. Additionally, the reciprocating wear test results illustrated that both wear resistance and hardness values of the composites increased as the amounts of Ni and CeO₂ increased, and the Al20Ni–10CeO₂ sample exhibited the highest wear resistance as 0.175 × 10^-3 mm³/Nm.     

Biodiversity and technological properties of yeasts from Turkish sourdough

Food Science and Biotechnology - In this study, yeasts were isolated and characterized from twelve traditional sourdough samples which belongs to Black Sea and Aegean regions of Turkey. Twenty six...     

3D Microstructures of Liquid Crystal Networks with Programmed Voxelated Director Fields

The shape-shifting behavior of liquid crystal networks (LCNs) and elastomers (LCEs) is a result of an interplay between their initial geometrical shape and their molecular alignment. For years, reliance on either one-step in situ or two-step film processing techniques has limited the shape-change transformations from 2D to 3D geometries. The combination of various fabrication techniques, alignment methods, and chemical formulations developed in recent years has introduced new opportunities to achieve 3D-to-3D shape-transformations in large scales, albeit the precise control of local molecular alignment in microscale 3D constructs remains a challenge. Here, the voxel-by-voxel encoding of nematic alignment in 3D microstructures of LCNs produced by two-photon polymerization using high-resolution topographical features is demonstrated. 3D LCN microstructures (suspended films, coils, and rings) with designable 2D and 3D director fields with a resolution of 5 µm are achieved. Different shape transformations of LCN microstructures with the same geometry but dissimilar molecular alignments upon actuation are elicited. This strategy offers higher freedom in the shape-change programming of 3D LCN microstructures and expands their applicability in emerging technologies, such as small-scale soft robots and devices and responsive surfaces.     

A novel proximity graph: Circular neighborhood cell graph for histopathological tissue image analyzing

The cell is the smallest unit of living beings, which has structural and functional properties. Almost all cell behaviors are regulated by various intracellular reactions initiated by the signaling. The signaling and the distance between cells influence each other. Thus, cell-location-based modeling and analyzing of histopathological tissues provide important information to the expert. In literature, methods such as distance-based threshold, K-Nearest Neighbor, Voronoi graphs, Delaunay triangulation, and colored graph have been used. However, circular neighborhood relationships of cells have not been considered by any CAD system so far despite of its crucial impact. Thus, we developed the circular neighborhood cell-graph. Histopathological images of liver were classified by using features extracted from T-Distance, K-Nearest Neighbor, Voronoi, Delaunay, and the proposed cell-graph. Then, the classification performances of the methods were compared. Experimental results show that liver tissue images can be classified with accuracy of 95.7% by using the features provided by the proposed cell-graph model.     

A two-dimensional material for high capacity supercapacitors: S-doped graphene

In this work, sulfur-doped graphene-coated electrodes are prepared by cyclic voltammetry in different potential ranges and different cycles (from 10 to 50) for selective modification of electrodes by different functional groups. The prepared electrodes are characterized by spectroscopic, microscopic and electrochemical methods. In scanning electron microscopic analysis, formation of graphene layers and their porous structure have been determined. Electrochemical impedance spectroscopic and cyclic voltammetric analyses are also used in electrochemical characterization of the electrodes. Then, the prepared sulfur-doped graphene-coated electrodes by using cyclic voltammetry in one-step and low cost are used as electrode materials of supercapacitor for the first time in the literature. Since the mesoporous structure of the electrodes prepared in lower potential ranges increases, specific capacitance of the electrodes increases from 74 to 1833 mF cm⁻² with 10 mA cm⁻² current density. This result shows that specific capacitances of prepared electrodes are higher than those of the electrodes prepared with metal-doped in the literature.     

A comparative study on structural,morphological and photocatalytic properties of anodically grown ZnO nanowires under varying parameters

Journal of Materials Science: Materials in Electronics - In this study, zinc oxide (ZnO) nanowires (NWs) were successfully produced on Zn plates through electrochemical anodization in potassium...     

The Effect of Hydrothermal Aging on the Low-Velocity Impact Behavior of Multi-Walled Carbon Nanotubes Reinforced Carbon Fiber/Epoxy Composite Pipes

Chemical transmission lines, petroleum and natural gas lines, pressure vessels, and pipes used in thermal facilities are expected to maintain their mechanical properties for many years without being damaged and not to be corroded in working conditions. The composite materials are the right candidate for these harsh conditions due to their superior properties. Reinforcement of nanoadditives to composite materials improves both the mechanical properties and the resistance to environmental conditions, thereby increasing the lifetime. In this study, multi-walled carbon nanotube (MWCNT) reinforced [±?55°] carbon fiber/epoxy composite pipes produced with filament wound method were used. It was hydrothermally aged in 80 °C distilled water for 1, 2, 3 weeks in order to examine the effect of environmental conditions. In order to investigate its resistance against loads that may occur in working conditions, ring tensile tests (ASTM D 2290–16 procedure A), and low-velocity impact tests at 5, 10, 15 J, energy levels were carried out. The effect of hydrothermal aging on neat and MWCNT added epoxy composite had been examined by considering the aging period. Consequently, the impact resistance of neat and MWCNT added samples decreased with the aging process. Besides, tangential tensile strength loss was 17% in MWCNT reinforced sample and 13% in the neat sample.

     

High-performance a-IGZO-based flexible TTFT with stacked dielectric layers via ultrathin high-κ SrTiO3 buffer layer grown on HfO2

Journal of Materials Science: Materials in Electronics - In this study, ITO-coated PET was used as the substrate to create a flexible and transparent structure. a-IGZO (amorphous InGaZnO4) is...     

Microbial source tracking using host specific FAME profiles of fecal coliforms

The objective of this study was to investigate the host-specific differences in fatty acid methyl ester (FAME) profiles of fecal coliforms (FC). A known-source library was constructed with 314 FC isolates cultured from 6 possible sources of fecal pollution; 99 isolates from sewage; 29 from bovine; 29 from poultry; 50 from swine; 46 from waterfowl; and 61 from deer. It was found that the hydroxy FAMEs 12:0 2 OH, 12:03 OH, and 14:02 OH were exclusively associated with isolates of human origin. On the other hand, 3 saturated FAMEs, 10:0, 15:0, and 18:0 were found only in isolates from non-human sources, 15:0 being associated with livestock samples only. In addition to the presence of these signature FAMEs, the mean relative masses of 16:1 omega7c and 16:1 ISO/14:03 OH were significantly different between the isolates of human and non-human origins. A linear discriminant function differentiated FC isolates of human origin from those of livestock and wildlife origin at 99% accuracy. These results strongly suggest that the FAME profiles of FC show statistically significant host specificity and may have the potential to be used as a phenotypic microbial source tracking tool.