Multifunctional Hydrophobized Microparticles for Accelerated Wound Healing after Endoscopic Submucosal Dissection

Endoscopic submucosal dissection (ESD) provides strong therapeutic benefits for early gastrointestinal cancer as a minimally invasive treatment. However, there is currently no reliable treatment to prevent scar contracture resulting from ESD which may lead to cicatricial stricture. Herein, a multifunctional colloidal wound dressing to promote tissue regeneration after ESD is demonstrated. This sprayable wound dressing, composed of hydrophobized microparticles, exhibits the multifunctionality necessary for wound healing including tissue adhesiveness, blood coagulation, re‐epithelialization, angiogenesis, and controlled inflammation based on hydrophobic interaction with biological systems. An in vivo feasibility study using swine gastric ESD models reveals that this colloidal wound dressing suppresses fibrosis and accelerates wound healing. Multifunctional colloidal and sprayable wound dressings have an enormous therapeutic potential for use in a wide range of biomedical applications including accelerated wound healing after ESD, prevention of perforation, and the treatment of inflammatory diseases.     

Multimodal sensing and active continuous closed‐loop feedback for achieving reliable manipulation in the outdoor physical world

The use of field robots can greatly decrease the amount of time, effort, and associated risk compared to if human workers were to carryout certain tasks such as disaster response. However, transportability and reliability remain two main issues for most current robot systems. To address the issue of transportability, we have developed a lightweight modularizable platform named AeroArm. To address the issue of reliability, we utilize a multimodal sensing approach, combining the use of multiple sensors and sensor types, and the use of different detection algorithms, as well as active continuous closed‐loop feedback to accurately estimate the state of the robot with respect to the environment. We used Challenge 2 of the 2017 Mohammed Bin Zayed International Robotics Competition as an example outdoor manipulation task, demonstrating the capabilities of our robot system and approach in achieving reliable performance in the fields, and ranked fifth place internationally in the competition.     

Dimeric C34 Derivatives Linked through Disulfide Bridges as New HIV-1 Fusion Inhibitors

C34, a 34-mer fragment peptide, is contained in the HIV-1 envelope protein gp41. A dimeric derivative of C34 linked through a disulfide bridge at its C terminus was synthesized and found to display potent anti-HIV activity, comparable with that of a previously reported PEGylated dimer of C34REG. The reduction in the size of the linker moiety for dimerization was thus successful, and this result might shed some light on the mechanism of the suppression of six-helix bundle formation by these C34 dimeric derivatives. Addition of a Gly-Cys(CH₂CONH₂)-Gly-Gly motif at the N-terminal position of a C34 monomeric derivative significantly increased the anti-HIV-1 activity. This moiety functions as a new pharmacophore, and this might provide a useful insight into the design of potent HIV-1 fusion inhibitors.     

Structural Characterization of Neutral Glycosphingolipids from 3T3‐L1 Adipocytes

In recent years, obesity has been considered a pathological stage of early lifestyle‐related diseases, and adipose tissue and adipocyte research has been active. Glycosphingolipids are involved in the pathogenesis of type 2 diabetes induced by insulin resistance, but the details of the glycosphingolipid molecular species composition of adipocytes have yet to be elucidated. We used 3T3‐L1 adipocytes and the 1,2‐dichloroethane‐wash method to remove triacylglycerols, which are abundant in adipocytes, and analyzed the structures of glycosphingolipids, particularly neutral glycosphingolipids, using liquid chromatography–mass spectrometry.     

Effect of morphology on shear viscosity for binary blends of polycarbonate and polystyrene

The structure and rheological properties of binary blends of polycarbonate (PC) and polystyrene (PS) were investigated using various PS samples with different molecular weights, namely PS1k (M_w = 1,000), PS53k (M_w = 53,000), and PS240k (M_w = 240,000). The blends with PS53k and PS240k show phase-separated structures, whereas the blend with PS1k is miscible. The shear viscosity decreases greatly on addition of PS53k and PS240k, especially at high shear rates, which would be a great advantage at processing operations. Because the nonlinear response occurs in the small strain region for multilayered films of PC and PS240k, the origin of the significant viscosity drop for the phase-separated system is interfacial slippage at the phase boundary.     

不同细颗粒含量甲烷水合物沉积物三轴剪切试验研究

海域试开采区域含水合物沉积物的粒度分析结果表明水合物沉积物骨架由粗、细颗粒混合构成,通过开展多组低温、高压三轴排水剪切试验研究细颗粒含量和密度对含甲烷水合物沉积物和无水合物沉积物的强度和变形特性的影响。试验结果表明,含水合物沉积物抗剪强度及剪胀性都随细粒含量提高而显著增强。这是由于细颗粒含量增加改变了颗粒间水合物的样貌和分布特征,形成了由水合物包裹着粗颗粒-细颗粒的团簇状集合体。然而,细颗粒含量对无水合物沉积物的强度和变形特性的影响却表现出相反趋势。另外,含水合物沉积物的剪胀关系可以使用修正剑桥模型中的剪胀关系式进行描述。结果表明,剪胀关系的拟合曲线依赖于水合物饱和度的大小。通过对比研究发现,天然水合物和实验室合成水合物试样在较高饱和度时的峰值摩擦角大小及其伴随水合物饱和度的增长趋势存在差异,这种差异主要来源于水合物在沉积物骨架颗粒孔隙中不同的赋存模式及分布特征。     

Nanostructured poly(3-hexylthiophene-2,5-diyl) films with tunable dimensions through self-assembly with polystyrene

Poly(3-hexylthiophene-2,5-diyl) is among the most widely used conjugated polymers for opto-electronic applications. To enhance its properties, researchers have attempted to nanostructure this polymer using various processes including breath figure arrays, nanolithography and elaborated organic synthesis. We here demonstrate a simple process to nanostructure the conjugated polymer using self-assembly with polystyrene and selective removal of one of the phases. The influence of the molecular weight of each polymer on the thin film morphology was systematically studied by atomic force microscopy. Using this approach, we observe two types of nanostructure, namely, nanoporous and nanoisland structures, of which the dimensions can be tuned by modifying the molecular weight of each polymer in the blend. This simple process introduces a cost-effective alternative to produce thin films of conjugated polymer with average nano-features from 100 nm up to 500 nm which could be used in a wide range of applications.     

Identification and Characterization of D‐Succinylase,and a Proposed Enzymatic Method for D‐Amino Acid Synthesis

Chiral amino acids are important intermediates for the pharmaceutical industry. We have developed a novel one‐pot enzymatic method for D ‐amino acid synthesis by the dynamic kinetic resolution of N‐succinyl‐dl ‐amino acids using D ‐succinylase (DSA) and N‐succinylamino acid racemase (NSAR, EC 4.2.1.113). The DSA from Cupriavidus sp. P4‐10‐C, which hydrolyzes N‐succinyl‐D ‐amino acids enantioselectively to their corresponding D ‐amino acids, was identified for the first time by screening soil microorganisms. Subsequently, the DSA gene was cloned and overexpressed in Escherichia coli. DSA was shown to comprise two subunits with molecular masses of 26 kDa and 60 kDa. Additionally, the NSAR gene from Geobacillus stearothermphilus NCA1503, which racemizes N‐succinylamino acids, was also cloned and overexpressed in E. coli. The highly purified DSA and NSAR prepared from each recombinant E. coli were characterized and used for D ‐amino acid synthesis. A one‐pot enzymatic method converted 100 mM N‐succinyl‐dl ‐phenylalanine to D ‐phenylalanine in 91.1% conversion with 86.7% ee. This novel enzymatic method may be useful for the industrial production of many D ‐amino acids.

     

Chemical Synthesis of a Synthetic Analogue of the Sialic Acid‐Binding Lectin Siglec‐7

As a basis for the development of an artificial carbohydrate‐binding lectin, we chemically synthesized a domain of siglec‐7, a well‐characterized sialic‐acid‐binding lectin. The full polypeptide (127 amino acids) was constructed by sequential native chemical ligation (NCL) of five peptide segments. Because of poor cysteine availability for NCL, cysteine residues were introduced at suitable ligation sites; these cysteine residues were alkylated in order to mimic native glutamine or asparagine residues, or converted to an alanine residue by desulfurization after NCL. After folding the full‐length polypeptide, the sialic‐acid‐binding activity of the synthetic siglec‐7 was clearly demonstrated by STD NMR and ELISA experiments. We succeeded in the synthesis of siglec‐7 by installing three extra cysteine residues with side‐chain modifications and found that these modifications did not affect the binding activity.     

On the electrochemical activation of alkali-treated soft carbon for advanced electrochemical capacitors

The electrochemical activation process of the so-called “alkali-treated soft carbon” (ASC) has been examined in organic electrolyte solutions. SEM observation demonstrated that the edge plane of graphene structure of the ASC particle becomes rough after the activation, and XRD measurements indicated that the average lattice constant of graphene stacking in ASC increases after the activation process. Ex-situ ⁷Li NMR measurements proved that the insertion of cation (Li⁺) into the pore structure of ASC is associated with the activation process in the electrolyte dissolving Li salt. The pore-size distribution determined from N₂-gas adsorption for ASC electrodes before and after the electrochemical activation indicates that the pore structure becomes developed after the electrochemical polarization, especially in the pore-diameter range of 2–10 nm. A schematic model of the activation process has been presented, which includes electrochemical insertion of ions into the inside of the ASC.