In situ observation of synthesized nanoparticles in ultra-dilute aerosols via X-ray scattering

In-air epitaxy of nanostructures (Aerotaxy) has recently emerged as a viable route for fast, large-scale production. In this study, we use small-angle X-ray scattering to perform direct in-flight characterizations of the first step of this process, i.e., the engineered formation of Au and Pt aerosol nanoparticles by spark generation in a flow of N₂ gas. This represents a particular challenge for characterization because the particle density can be extremely low in controlled production. The particles produced are examined during production at operational pressures close to atmospheric conditions and exhibit a lognormal size distribution ranging from 5–100 nm. The Au and Pt particle production and detection are compared. We observe and characterize the nanoparticles at different stages of synthesis and extract the corresponding dominant physical properties, including the average particle diameter and sphericity, as influenced by particle sintering and the presence of aggregates. We observe highly sorted and sintered spherical Au nanoparticles at ultra-dilute concentrations (< 5 × 10⁵ particles/cm³) corresponding to a volume fraction below 3 × 10^–10, which is orders of magnitude below that of previously measured aerosols. We independently confirm an average particle radius of 25 nm via Guinier and Kratky plot analysis. Our study indicates that with high-intensity synchrotron beams and careful consideration of background removal, size and shape information can be obtained for extremely low particle concentrations with industrially relevant narrow size distributions.

     

Purification and characterization of an endopeptidase from Lactobacillus delbrueckii subsp. bulgaricus B14

An intracellular endopeptidase was purified from cell-free extracts of Lactobacillus delbrueckii subsp. bulgaricus B14 by anion exchange chromatography on DEAE-Sepharose, hydroxyapatite chromatography, second anion exchange chromatography on Mono-Q, and metal-chelating affinity chromatography. The endopeptidase was a monomer with a molecular mass of approximately 70 kDa determined by SDS-PAGE and gel filtration. Various oligopeptides (e.g. Met-enkephalin, bradykinin) were hydrolysed by the endopeptidase. Exopeptidase activity and cleavage of dipeptides or tripeptides was not observed. The K_M value for the cleavage of Metenkephalin was 1.2 mM. Temperature and pH optima were 47 °C and pH 7.7, respectively. The endopeptidase was inhibited by the classical agents for metal-dependent (EDTA) and serine (DFP) enzymes. Activity was increased by Co²⁺ and Mg²⁺, no effect was observed with Ca²⁺. After inhibition with EDTA, enzyme activity could be restored fully by Co²⁺. Activity was inhibited by Zn²⁺, Mn²⁺, Fe²⁺, Cu²⁺, Cd²⁺ and Hg²⁺. The N-terminal sequence of the endopeptidase was determined as: H₂N-Val-Arg-Gly-Gly-Ser-Gly-Asp-Thr-Thr-Val-0H.     

Strain-induced corrosion cracking of low-alloy steels in LWR systems — case histories and identification of conditions leading to susceptibility

The term “strain-induced corrosion cracking” (SICC) is introduced to describe crack formation involving dynamic straining, but in the absence of obvious, cyclic loading. Its origins in slow-strain-rate testing and in corrosion failures in boiler systems are described and the links with “classical” stress corrosion cracking and low-cycle corrosion fatigue are identified. Four areas, in which SICC of low-alloy steels in LWR systems has occurred, are described in detail and the typical features are used, together with literature data from laboratory testing, to identify conditions leading to susceptibility. Indications are given of remedial measures and of areas in which further work is necessary.     

Mediator-Related Symptoms and Anaphylaxis in Children with Mastocytosis

Mastocytosis is characterized by the pathological accumulation of mast cells (MC) in various organs. In these patients, MC may degranulate and thereby contribute to clinical symptoms, especially when a concomitant allergy is present. However, MC activation can not only be induced by high-affinity receptors for IgE, but also by anaphylatoxins, neuropeptides, IgG immune complexes, complement-components, drugs, products of bacteria or parasites, as well as physical factors such as heat, cold, vibration, stress, sun, or physical effort. Symptoms due to mediators released by activated MC may develop in adults suffering from systemic mastocytosis, but also evolve in children who usually have cutaneous mastocytosis (CM). Clinically, CM is otherwise characterized by typical brown, maculopapular skin lesions or mastocytoma associated with a positive Darier’s sign. Pruritus and flushing are common and blistering may also be recorded, especially in diffuse CM (DCM). Pediatric patients with mastocytosis may also have gastrointestinal, respiratory, and neurologic complaints. Although anaphylaxis is not a typical finding, pediatric patients with massive skin involvement and high tryptase levels have a relatively high risk to develop anaphylaxis. This paper reviews MC mediator-related symptoms and anaphylaxis in children with mastocytosis, with special emphasis on risk factors, triggers, and management.     

The Effect of Small Additions of Fe and Heavy Deformation on the Precipitation in an Al–1.1Mg–0.5Cu–0.3Si At. Pct Alloy

Metallurgical and Materials Transactions A - The effect of 0.03 and 0.08 at. pct Fe additions on the formation of secondary phases in an Al–1.1Mg–0.5Cu–0.3Si at. pct alloy was...     

Advanced experimental and numerical methods for the analysis of the dynamic forming press behavior

Numerical simulations are used to estimate the dynamic behavior of new concepts of forming presses as well as to improve the dynamic properties of existing machines. These simulations are to be parametrized with appropriate values in order to yield most accurate results. In many cases neither the way of building up the simulation model for the specific problem nor an appropriate method for gathering the needed date are given in advance. Regarding these facts this paper intends both to characterize the way of building up complex simulation models by using basic simulation modules and to describe methods for the identification of the needed parameters that work even under conditions that hitherto made parameter identifications impossible or at least very time-consuming. In this context recent developments in simulating press dynamics will also be characterized as new modal analysis methods that are not yet established in the field of forming technique. The research activities were financed by the European Research Association for Sheet Metal Working.     

An empirical study of control logic specifications for programmable logic controllers

This paper presents an empirical study of control logic specifications used to document industrial control logic code in manufacturing applications. More than one hundred input/output related property specifications from ten different reusable function blocks were investigated. The main purpose of the study was to provide understanding of how the specifications are expressed by industrial practitioners, in order to develop new tools and methods for specifying control logic software, as well as for evaluating existing ones. In this paper, the studied specifications are used to evaluate linear temporal logic in general and the specification language ST-LTL, tailored for functions blocks, in particular. The study shows that most specifications are expressed as implications, that should always be fulfilled, between input and output conditions. Many of these implications are complex since the input and output conditions may be mixed and involve sequences, timer issues and non-boolean variables. Using ST-LTL it was possible to represent all implications of this study. The few non-implication specifications could be specified in ST-LTL as well after being altered to suit the specification language. The paper demonstrates some advantages of ST-LTL compared to standard linear temporal logic and discusses possible improvements such as support for automatic rewrite of complex specifications.     

Single-stage flowing liquid film impactor for continuous on-line particle analysis

A single-stage “wet impactor” is presented, where the impaction occurs on a regenerated water surface. The developed impactor is equipped with an impaction liquid support plate of etched glass and a drain spout providing a continuous liquid flow covering the impaction area. Subsequent transport of the impaction liquid makes an on-line determination possible. With multiple nozzles (74 holes, 0.3 mm i.d.) and an air flow of 101/min the cut-off was determined to 0.41 ± 0.02 μm. The impactor was also investigated for its particle loss. The cut-off function, regarding the consequences of letting impaction occur in a liquid film is discussed and compared to conventional impactors. The analysis technique was tested in an ambient air measurement study with an ion chromatograph attached to the sampling system.     

Preparation of anchored ceramic coatings on metal substrates: a modified sol-gel technique using colloidal silica sol

A single-step dip-coating technique was developed to produce stable films or washcoats of controlled thickness, surface area and pore-size distribution on alumina whisker-covered metal substrates (both flat plates and monoliths). Dip-coating slurries were prepared by dispersing fine porous powder in a colloidal silica sol. The method provided control over coating thickness and coating properties, such as pore-size distribution and surface area. The coating thickness could be varied between approximately 2 and 40 m by selecting slurry composition and withdrawal speed in the dipping procedure. The pore-size distribution and surface area could be varied by changing type and amount of porous filler material in the dipping slurry. Uniform and bimodal pore-size distributions were obtained using silica and ZSM-5 molecular sieves, respectively, yielding coatings with surface areas between 60 and 400 m²g^–1.     

Muscular capabilities and workload of flight attendants for pushing and pulling trolleys aboard aircraft

Increasingly in the recent years, passengers’ services are extended into the ascent and descent flight phases on short distance flights. Trolleys containing the required meal and beverage items are used for these service operations and pushed or pulled along the aisles of the aircraft. Flight attendants reported about increased musculo-skeletal disorders and had been complaining about high physical workload from handling trolleys. In order to ensure acceptable load levels for pushing or pulling operations of trolleys, the physical capabilities of the collective “flight attendants” had been investigated by means of force measurements at maximum voluntary contraction (MVC) level and associated relevant anthropometrical and biometrical data. CEN and ISO standards as well as international and national German methods were used to derive recommended force limits for pushing/pulling operations with respect to the physical capabilities of the target group “flight attendants”. Comparing these recommended limits with the force requirements per shift under various conditions of trolley handlings (inclination of the floor, type and weight of trolley, mode of handling, frequency of operation) showed that especially for higher floor inclinations and trolley weights, flight attendants work (substantially) above recommended limits. It became also apparent that the handling of half-size trolleys is unexpectedly high demanding due to high vertical force components, caused by the unfavorable location of their center of gravity.

Relevance to industry

On short-distance flights, passengers’ services are performed by means of trolleys from the ascent to the descent flight phases. Flight attendants had been complaining about high physical workload. This study offers recommendations on maximum force limits for the handling of trolleys with respect to the muscular capacities and work situations of flight attendants on short-distance flights.