Impact of non‐solvent on regeneration of cellulose dissolved in 1‐(carboxymethyl)pyridinium chloride ionic liquid

Cellulose dissolved in ionic liquid (1‐(carboxymethyl)pyridinium chloride)/water (60/40 w/w) mixture is regenerated in various non‐solvents, namely water, ethanol, methanol and acetone, to gain more insight into the contribution of non‐solvent medium to the morphology of regenerated cellulose. To this end, the initial and regenerated celluloses were characterized with respect to crystallinity, thermal stability, chemical structure and surface morphology using wide‐angle X‐ray diffraction, thermogravimetric analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. According to the results, regardless of non‐solvent type, all regenerated samples have the same chemical structure and lower crystallinity in comparison to the initial cellulose, making them a promising candidate for efficient biofuel production based on enzymatic hydrolysis of cellulose. The reduction in crystallinity of regenerated samples is explained based on the potential of the non‐solvent to break the hydrogen bonds between cellulose chains and ionic liquid molecules as well as the affinity of water and non‐solvent which can be evaluated based on Hansen solubility parameter. The latter also determines the phase‐separation mechanism during the regeneration process, which in turn affects surface morphology of the regenerated cellulose. The pivotal effect of regenerated cellulose crystallinity on its thermal stability is also demonstrated. Regenerated cellulose with lower crystallinity is more susceptible to molecular rearrangement during heating and hence exhibits enhanced thermal stability. © 2019 Society of Chemical Industry     

Effects of yoghurt butter oils on rat plasma lipids,haematology and liver histology parameters in a 150‐day study

Although yoghurt butter oil as a fermented dairy product is widely consumed in several countries, its metabolic effects have not been fully elucidated. In this study, male Wistar rats were treated with standard diet, standard diet enriched with 10% or 20% (W/W) of either cow yoghurt butter oil (CYBO), sheep yoghurt butter oil (SYBO) or cottonseed oil (COT) for 20 weeks. Treatment of rats with CYBO or SYBO (at both concentrations) did not significantly influence haematological parameters, plasma lipids and liver histological structure. However, in contrast to popular belief, COT treatment at the higher dose induced leukocytosis, dyslipidaemia and liver steatosis.     

Silicon Nanoparticles Produced by Two-Step Nanosecond Pulsed Laser Ablation in Ethanol for Enhanced Blue Emission Properties

In this work, we introduce a facile method of laser ablation to synthesize silicon rich oxide nanoparticles colloid with blue-green emissions. The method includes a two-step nanosecond pulsed laser ablation of silicon in ethanol. First, the micro-porous layer is formed on the silicon surface by laser ablation of the target, followed by ablating the oxidized micro-porous silicon to prepare the nanoparticles dispersed in ethanol. The nanoparticles interface structure exhibit the crystalline of quartz and non-stoichiometric oxide in suboxide phase of the SiO1.5 as examined by Fourier transform infrared spectroscopy, UV-vis spectrophotometry and X-ray diffraction pattern. Study of the colloid photoluminescence properties reveals that the coupling of silicon nanocrystals and interfacial states may play important role in the blue emission mechanism of the colloid. Our results support that the radiative recombination at the interfacial localized states of Si/SiO1.5 can easily occur in the colloid resulting the blue emission peak at the wavelength of 425 nm. In other words, a more effective pathway is provided for excited electrons in the colloid including occurrence of excitations in silicon nanocrystal states and emission in the interfacial states. This method avoids any toxic by-product during the synthesis of colloid and can be used for the commercial-scale production of silicon nanoparticles as the blue emission material.     

No-chatter model-free sliding mode control for synchronization of chaotic fractional-order systems with application in image encryption

Multimedia Tools and Applications - Synchronization of different Chaotic dynamical systems is one of the main issues in engineering which has a lot of applications in applied sciences like secure...     

Selecting model for treatment of oily wastewater by MF-PAC hybrid process using mullite-alumina ceramic membranes

Hermia’s models for cross flow filtration were used to investigate the fouling mechanisms of mullite-alumina ceramic membranes in treatment of oily wastewaters in a hybrid microfiltration-powdered activated carbon process (MF-PAC). Results show that cake filtration model can be applied for prediction of permeation flux decline for MF and MF-PAC process up to 400 ppm PAC. The complete pore blocking model and the intermediate pore blocking model can predict permeation flux decline with time for MF-PAC with 800 and 1200 ppm PAC respectively. Average error for prediction of permeation flux with cake filtration model is 2.19% for MF process and 2.16, 2.06 and 1.31% for MF-PAC process with 100, 200 and 400 ppm PAC respectively. Also for MF-PAC process with 800 and 1200 ppm PAC, average error for prediction of permeation flux with complete pore blocking model and intermediate pore blocking model was 6.11 and 6% respectively.     

Thickness and scratch resistance of adsorbed film formed by triblock symmetrical copolymer solutions

The thickness and scratch resistance of adsorbed films formed on mild steel samples (MS1020), which have been immersed in water copolymer solutions, are reported. The effects of bulk temperature and the copolymer structures, normal, poly(ethylene oxide)_m‐poly(propylene oxide)_n‐poly(ethylene oxide)_m, and reverse, poly(propylene oxide)_n‐poly(ethylene oxide)_m‐poly(propylene oxide)_n, are elucidated. The films' thicknesses are independent of structure but not of temperature. The adsorbed films of above cloud point solutions are thicker than below cloud point. However, nanoscratch experiments carried out to measure the scratch resistance of the films reveal that despite of thicker film formed by above cloud point solutions, it is relatively more prone to being detached than the thinner films of below cloud point solutions. The effect of extreme pressure additive, alkyl phosphate ester (APE), is also investigated suggesting the normal copolymer has comparable scratch resistance with APE when used at below the cloud point. Copyright © 2016 John Wiley & Sons, Ltd.     

Mathematical Behavior of Optical Density of γ-Ray Radiography Images of Steel Pipes

Russian Journal of Nondestructive Testing - The purpose of this article is to determine the mathematical function of the optical behavior of radiographic films/images produced by gamma-ray...     

Sparse representation based facial image compression via multiple dictionaries and separated ROI

Multimedia Tools and Applications - Constant increasing of visual information necessitates most efficient image compression schemes for saving storage space or reducing required transmission...     

Microstructural and precipitation characterization in Nb-Mo microalloyed steels: Estimation of the contributions to the strength

The influence of coiling temperature on the final microstructure and precipitation has been analyzed in several low carbon Nb and Nb-Mo microalloyed steels. A throughout characterization of the complex microstructures has been performed using electron backscattered diffraction, measuring low and high angle unit sizes, microstructural substructure, as well as quantifying the homogeneity. An important microstructural refinement is observed for all compositions as the coiling temperature decreases. Regarding precipitation, the coiling temperature strongly modifies the size and density of the fine precipitates, being 550 °C the optimal coiling temperature for the Nb-Mo steels. The addition of Mo to Nb steels provides a refinement of the precipitates and, therefore, enhances their contribution to strengthening. Considering all the microstructural and precipitation quantification data, the yield strength was estimated and the contribution of the different mechanisms calculated. The grain size contribution is proven to be the most important factor regarding strengthening, followed by dislocation density and precipitation especially at low coiling temperatures and Nb-Mo steels.