Performance Analysis of Pulse Generators on Residual Stress of Machined Silicon Steel Using the EDM Process

The cracks in the workpiece specimens can reduce the fatigue life of any machine components. Since the residual stress has a considerable amount of influence on determining crack formation over the machined surface, it is very essential to analyze the residual stress developed in any machining process. However, it is a very tedious process to compute the residual stress over the machined surface. In the present study, an endeavor has been made to measure and analyze the residual stress of machined silicon steel as a workpiece using the EDM process with different energy distribution. The nano-indentation method was used to compute the residual stress produced over the machined surface. From the experimental results, it was found that the uniform energy distribution has produced higher compressive residual stress owing to the tiny and uniform spark energy distribution. It has also been observed that the tool electrode has a considerable amount of influence on determining development of residual stress in the EDM process.     

Pixel rearrangement based statistical restoration scheme reducing embedding noise

In this paper, a block based steganographic algorithm has been proposed where a sequence of secret bits are embedded into a set of pixels by rearranging the pixel locations. This algorithm has been devised as an improvement over existing statistical restoration based algorithms in order to reduce the additive noise which occurs due to embedding. It is shown that the proposed scheme substantially reduces the additive noise compared to existing statistical restoration based schemes.     

A Hybrid Clustering Approach Based Q-Leach in TDMA to Optimize QOS-Parameters

An Orthogonal frequency part multiplexing suffers from a considerable challenge due to a high peak to average power ratio (PAPR). Hence, an effective method such as partial transmits sequence (PTS) can avert this defiance by limit the design of PAPR. Therefore, an improving PAPR reduction performance via a novel approach is proposed by detaching each subblock into two parts furthermore exchanges the first sample with the final selection in each portion of the subblock to generate a new partitioning scheme. Several typical traditional segmentation schemes are used to analyze and apply the presented algorithm, such as adjacent, interleaving, and pseudo-random schemes. Besides, two scenarios are adopted based on simulation software in which the number of subcarriers is set to 128 and 256. Based on the results, a superior PAPR reduction performance is achieved based on the improved segmentation schemes regarding traditional strategies in both systems. Moreover, the enhanced adjusted PTS scheme poses a low computational complexity compared with that of the conventional schemes.

     

Polyethers with phosphate pendant groups by monomer activated anionic ring opening polymerization: Syntheses,characterization and their lithium-ion conductivities

This paper describes the preparations and lithium-ion conductivities of various solid polymer electrolytes for potential use in high-energy density lithium-ion batteries. The ring opening polymerization of epoxides (M1–M6), catalyzed by Zn(II), Cu(II) and Cd(II) complexes in the presence of tetrabutylammonium bromide (TBAB), yielded polyethers (P1–P6) in which phosphates were attached as pendant groups. A reaction condition where Zn(II) catalyst used slightly excess to TBAB increased the polymerization rate remarkably and yielded the polyethers with higher molar masses in a short time. These polymerizations proceeded following a “monomer activated anionic ring opening polymerization” mechanism. These living like polymerizations also progressed according to “formation of polymer chain per initiator” model. The solid-state lithium-ion conductivities of these polymers were examined using lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). The conductivity of one of the solid polymer electrolytes with 40 wt% of LiTFSI was 5.2 × 10⁻⁵ S cm⁻¹ at room temperature and 2.9 × 10⁻⁴ S cm⁻¹ at 80 °C.     

Enhancement of corrosion protection of 3-glycidoxypropyltrimethoxysilane-based sol–gel coating through methylthiourea doping

Protection of aluminum metal and its alloys from corrosion is a key requirement for many engineering applications. Nowadays, sol–gel coating technology is recognized as the ideal replacement for chromate conversion coatings. The present work makes use of 3-glycidoxypropyltrimethoxysilane (GPTMS) as a precursor for sol–gel coating. GPTMS was subjected to hydrolysis and subsequent condensation reaction to get a three-dimensional network and methylthiourea (MTU) was incorporated into the sol–gel matrix. MTU-doped GPTMS-based sol–gel coatings were applied over aluminum metal by dip coating method. The resultant coating was studied by FTIR, XRD and SEM. MTU-doped GPTMS-based sol–gel coatings increased the hydrophobic nature of the coating and were stable up to a temperature of 450°C. The protective nature of the coatings was evaluated in a 1% NaCl environment using electrochemical impedance and polarization studies. The study has revealed that doping of MTU enhanced the protection ability of doped GPTMS-based sol–gel coating to a significant extent.     

Nanoparticle-filled silane films as chromate replacements for aluminum alloys

Silane surface treatments have been developed as an alternative for toxic and carcinogenic chromate-based treatments for years. It is consistently observed that ultra-thin silane films offer excellent corrosion protection as well as paint adhesion to metals. The silane performance is comparable to, or in some cases better than, that of chromate layers. The most recent studies also showed that the silane films can be thickened and strengthened by loading of a small amount of nanoparticles such as silica and alumina into the films resulting in enhanced corrosion protection of aluminum alloys.     

Reduction of sidelobe levels in multicarrier radar signals via the fusion of hill patterns and geometric progression

Multi-carrier waveforms have several advantages over single-carrier waveforms for radar communication. Employing multi-carrier complementary phase-coded (MCPC) waveforms in radar applications has recently attracted significant attention. MCPC radar signals take advantage of orthogonal frequency division multiplexing properties, and several authors have explored the use of MCPC signals and the difficulties associated with their implementation. The sidelobe level and peak-to-mean-envelope-power ratio (PMEPR) are the key issues that must be addressed to improve the performance of radar signals. We propose a scheme that applies pattern-based scaling and geometric progression methods to enhance sidelobe and PMEPR levels in MCPC radar signals. Numerical results demonstrate the improvement of sidelobe and PMEPR levels in the proposed scheme. Additionally, autocorrelations are obtained and analyzed by applying the proposed scheme in extensive simulation experiments.     

Tweaking the diameter and concentration of carbon nanotubes and sintering duration in Copper based composites for heat transfer applications

Copper (Cu) gained its importance in several applications due to its attractive thermal characteristics. However, its applications are limited, wherever high strength and high thermal conductivity are desirable. Thus, an attempt was made to develop Cu/CNT composites having the improved mechanical and thermal properties. Initially, Cu/CNT composite powder was synthesized through molecular level mixing technique, where the functionalized 20–40?nm and 40–60?nm diameter CNT with varying concentrations from 0.25 to 1.0?wt.% with an increment of 0.25?wt.% were used. The powder was uniaxially compacted at 800?MPa and sintered in the range of 2–8?hr at 900?°C. The best characteristics of Cu/CNT composites obtained from the present study are as follows: Relative density (RD) – 89.1%, Hardness – 61.2?±?0.58 VHN, Thermal conductivity – 343?W/mK and these characteristics obtained their maximum value at 0.25?wt.% CNT concentration and started to decrease irrespective of CNT diameter.