Isolation of antimicrobial agent from the marine algae Cystoseira hakodatensis

Cystoseira hakodatensis is an unutilised brown algae belonging to family Sargassaceae. A crude methanol extract from the algae showed inhibitory effects on the growths of Bacillus cereus and Bacillus licheniformis. To isolate the major antimicrobial agent, a sequential active‐guided isolation procedure was applied: liquid–liquid extraction, column chromatography and bio‐autography. A marked antimicrobial agent (active α) was isolated in hydrophobic fraction and was determined to phenolics without carbohydrates and proteins by phytochemical test. Regarding the antimicrobial potential, the isolated active α showed better inhibitory effects against B. cereus and B. licheniformis at 2 and 4 times of lower concentrations (62.5 and 31.3 μg mL^?1) in comparison with epigallocatechin gallate. These results showed that C. hakodatensis is a potential source of antimicrobial agent capable of preventing the growth of the two bacteria.     

Conversion of aqueous extracts from thermochemical treatment of bagasse into functional emulsifiers

Synthetic emulsifiers in food industries are being replaced with a customer-friendly food ingredient that is derived from biomass using sustainable green technologies. After hydrothermal liquefaction treatment, raw bagasse (21%), pith (26%), and rind portions (25%) were obtained with reduced ash contents. As aqueous extracts, with oligosaccharides and lignin residues, it was used in the preparation of oil-in-water emulsions with 5% soybean oil. Results showed that the emulsions stabilised the oil droplets with particle size between 11 and 17 µm by steric repulsion with raw bagasse-stabilised emulsion showing a better stability at 25 °C (31 days). It was demonstrated that raw bagasse extracts, without alteration, maybe a potential unconventional source for food-grade emulsifiers by integrating a versatile thermochemical conversion of waste without the use of chemicals.     

Investigation of high-temperature chemical interaction of calcium silicate insulation and cesium hydroxide

ABSTRACT

The interaction of cesium hydroxide and a calcium silicate insulation material was experimentally investigated at high-temperature conditions to evaluate the possibility of unprecedented cesium retention under severe accident of boiling water reactor. The temperature where the interactions occurred and chemical species of cesium after the interaction were examined in this study. A thermogravimetry equipped with differential thermal analysis was used to analyze thermal events in the samples of mixed calcium silicate and cesium hydroxide under oxidizing and reducing atmospheric conditions with a maximum temperature of 1100°C. Before being mixed with cesium hydroxide, a part of calcium silicate was pretreated at high temperature to evaluate the effect of possible structural changes of this material due to a preceding thermal history and also for the sake of thermodynamic evaluation. It was found that for the original material, as xonotlite (Ca₆Si₆O₁₇(OH)₂) crystal, the endothermic reaction with cesium hydroxide occurred over the temperature range 575–730°C; meanwhile, for heat-treated material, which varied the crystal phase of original material to wollastonite (CaSiO₃), the interaction occurred over the temperature range 700–1100°C. The X-ray diffraction analyses have indicated that both types of calcium silicates regardless of the atmospheric conditions, cesium aluminum silicate, CsAlSiO₄, was formed with aluminum in the samples as an impurity or adduct. The insolubility of this formed cesium suggested the potency of cesium localization in the primary containment vessels on other structural materials that possess similar elements to that of calcium silicate insulation; hence, an effective decommissioning process could be developed.     

Development and field test of the articulated mobile robot T2 Snake-4 for plant disaster prevention

Abstract

In this work, we develop an articulated mobile robot that can move in narrow spaces, climb stairs, gather information, and operate valves for plant disaster prevention. The robot can adopt a tall position using a folding arm and gather information using sensors mounted on the arm. In addition, this paper presents a stair climbing method using a single backward wave. This method enables the robot to climb stairs that have a short tread. The developed robot system is tested in a field test at the World Robot Summit 2018, and the lessons learned in the field test are discussed.     

Textile‐surface interfacial asymmetric polymerization

This research demonstrated that polymerization of aniline on cellulose produces chiroptically active composites. Polymerization of aniline in the presence of cotton fibers consisting of chiral cellulose are performed to prepare a polyaniline (PANI)/cotton composite. The polymerization is conducted at the cotton interface. The resultant PANI/cotton composite shows chiroptical activity elucidated with diffuse reflectance circular dichroism. In this reaction, textile‐surface interfacial asymmetric polymerization is performed with imprinting of chiral structure from the cotton as a natural chiroptically active polymer to the PANI. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41118.     

Indoor air pollution and its impact on children under five years old in Bangladesh

Indoor air concentrations of volatile organic compounds (VOCs), carbon monoxide (CO), carbon dioxide (CO2), nitrogen dioxide (NO2), and dust particles were measured for 49 biomass and 46 fossil fuel users in urban slums of Dhaka, Bangladesh. The health impacts of these pollutants were assessed on 65 and 51 children under five years old from families who use biomass and fossil fuel as main source of energy, respectively. Mean concentrations of CO were found to be significantly higher in biomass fuel users (P = 0.010), while geometric mean concentrations of benzene, xylene, toluene, hexane, total VOCs, and NO2 were significantly higher (P < 0.01) in the fossil fuel users. Symptoms such as redness of eyes, itching of skin, nasal discharge, cough, shortness of breath, chest tightness, wheezing, or whistling chest were found to be associated with the choice of biomass fuel, with the odds ratio ranging from 4.0 to 6.3. No significant association of use of biomass fuel with respiratory diseases, eczema, diarrhea, or viral fever was observed after adjustment for potential confounders. These results suggest a significant association between the biomass fuel-using population and respiratory symptoms. These symptoms may not be due to the pollutants only, as some other underlying causes may be present. PRACTICAL IMPLICATIONS: The health of children under five years old in Bangladesh, especially those living in poor socioeconomic conditions, is considered to be worsening because of indoor air pollution. It is commonly suggested that biomass fuel should be replaced by fossil fuel, as pollution levels are believed to be higher with biomass fuel. Our findings, however, suggest that pollution can be higher with fossil fuels, and indicate that a switch in fuel from biomass to fossil does not necessarily improve the children's health. Awareness programs should therefore be undertaken to avoid the unnecessary use of gas. Clean fuels and clean stoves should also be ensured to reduce emissions of indoor air pollutants.     

Simultaneous determination of dissolved organic carbon and phosphorus in waters using flame ionization and photometric detectors

An apparatus with flame ionization and photometric detectors was assembled for the simultaneous determination of dissolved organic carbon (DOC) and phosphorus (DP) in waters. The optimum operating conditions were described. The long-term precision (relative standard deviation) is 5.8% for DOC and 5.2% for DP. The detection limits are 0.09 μg ml⁻¹ for DOC and 0.03 μg ml⁻¹ for DP. The responses for various DOC and DP compounds agreed almost with those obtained by combustion-infrared and persulfate digestion-colorimetric methods, respectively. DOC and DP in several water samples were determined by this method and other methods, and the results obtained by those methods were discussed.     

One-year monthly monitoring of Torque teno virus (TTV) in wastewater treatment plants in Japan

Torque teno virus (TTV) is a novel hepatitis virus which is considered to be transmitted by the fecal-oral route. Wastewater samples were collected monthly from eight wastewater treatment plants in Japan for 1 year, from July 2003 to June 2004, and tested for the presence of TTV by TaqMan PCR. TTV was detected in 97% (93/96) of influent samples, implying that TTV is epidemic in Japan. TTV was also isolated in 18% (17/96) of secondary effluent samples before chlorination and in 24% (23/95) of final effluent samples after chlorination. There was no significant difference between the concentration of total coliform in TTV-positive final effluents and that in TTV-negative final effluents, which indicates that total coliform cannot be used as an indicator of TTV. No TTV was detected in 24 effluents for reuse from two wastewater treatment plants using sand filtration and ozonation.     

Bioaugmented membrane bioreactor (MBR) with a GAC-packed zone for high rate textile wastewater treatment

The long-term performance of a bioaugmented membrane bioreactor (MBR) containing a GAC-packed anaerobic zone for treatment of textile wastewater containing structurally different azo dyes was observed. A unique feeding strategy, consistent with the mode of evolution of separate waste streams in textile plants, was adopted to make the best use of the GAC-zone for dye removal. Dye was introduced through the GAC-zone while the rest of the colorless media was simultaneously fed through the aerobic zone. Preliminary experiments confirmed the importance of coupling the GAC-amended anaerobic zone to the aerobic MBR and also evidenced the efficacy of the adopted feeding strategy. Following this, the robustness of the process under gradually increasing dye-loading was tested. The respective average dye concentrations (mg/L) in the sample from GAC-zone and the membrane-permeate under dye-loadings of 0.1 and 1 g/L.d were as follows: GAC-zone (3, 105), permeate (0, 5). TOC concentration in membrane-permeate for the aforementioned loadings were 3 and 54 mg/L, respectively. Stable decoloration along with significant TOC removal during a period of over 7 months under extremely high dye-loadings demonstrated the superiority of the proposed hybrid process.