Charge Transportation and Chirality in Liquid Crystalline Helical Network Phases of Achiral BTBT-Derived Polycatenar Molecules

First examples of multichain (polycatenar) compounds, based on the π-conjugated [1]benzothieno[3,2-b]benzothiophene unit are designed, synthesized, and their soft self-assembly and charge carrier mobility are investigated. These compounds, terminated by the new fan-shaped 2-brominated 3,4,5-trialkoxybenzoate moiety, form bicontinuous cubic liquid crystalline (LC) phases with helical network structure over extremely wide temperature ranges (>200 K), including ambient temperature. Compounds with short chains show an achiral cubic phase with the double network, which upon increasing the chain length, is at first replaced by a tetragonal 3D phase and then by a mirror symmetry is broken triple network cubic phase. In the networks, the capability of bypassing defects provides enhanced charge carrier mobility compared to imperfectly aligned columnar phases, and the charge transportation is non-dispersive, as only rarely observed for LC materials. At the transition to a semicrystalline helical network phase, the conductivity is further enhanced by almost one order of magnitude. In addition, a mirror symmetry broken isotropic liquid phase is formed beside the 3D phases, which upon chain elongation is removed and replaced by a hexagonal columnar LC phase.     

Carbon,nitrogen and phosphorus recovery from liquid swine wastes: a review

Due to the pollution characteristics of the wastewater generated in piggeries, these waste streams have to be treated before discharging into the environment. These wastes have a high content of organic matter, nitrogen and phosphorus that can be converted or recovered into valuable products. The valuation of swine waste by anaerobic digestion has already been assessed, but no systematic review on the technologies used for recovering nutrients from this waste has been reported to date. Therefore, the present work has the goal of presenting the most studied technologies to different scales of recovery of carbon (i.e. organic matter), nitrogen and phosphorus from swine waste. The main characteristics and parameters of the processes involved in these technologies (mainly air stripping, membrane, enhance biological phosphorus removal and struvite formation) are also highlighted, pointing out its advantages and disadvantages and posing some final feasibility considerations on the subject addressed. Experiments reported in the literature proved that technologies used for nutrient recovery from swine waste are mostly applied to the effluents previously treated by anaerobic digestion as a primary treatment, and greater effort is required for the future implementation of these technologies in large scale. © 2020 Society of Chemical Industry     

Preliminary Evidence on the Diagnostic and Molecular Role of Circulating Soluble EGFR in Non-Small Cell Lung Cancer

Assessment of biological diagnostic factors providing clinically-relevant information to guide physician decision-making are still needed for diseases with poor outcomes, such as non-small cell lung cancer (NSCLC). Epidermal growth factor receptor (EGFR) is a promising molecule in the clinical management of NSCLC. While the EGFR transmembrane form has been extensively investigated in large clinical trials, the soluble, circulating EGFR isoform (sEGFR), which may have a potential clinical use, has rarely been considered. This study investigates the use of sEGFR as a potential diagnostic biomarker for NSCLC and also characterizes the biological function of sEGFR to clarify the molecular mechanisms involved in the course of action of this protein. Plasma sEGFR levels from a heterogeneous cohort of 37 non-advanced NSCLC patients and 54 healthy subjects were analyzed by using an enzyme-linked immunosorbent assay. The biological function of sEGFR was analyzed in vitro using NSCLC cell lines, investigating effects on cell proliferation and migration. We found that plasma sEGFR was significantly decreased in the NSCLC patient group as compared to the control group (median value: 48.6 vs. 55.6 ng/mL respectively; p = 0.0002). Moreover, we demonstrated that sEGFR inhibits growth and migration of NSCLC cells in vitro through molecular mechanisms that included perturbation of EGF/EGFR cell signaling and holoreceptor internalization. These data show that sEGFR is a potential circulating biomarker with a physiological protective role, providing a first approach to the functional role of the soluble isoform of EGFR. However, the impact of these data on daily clinical practice needs to be further investigated in larger prospective studies.     

Design and analysis of a new wave energy converter based on a point absorber and a hydraulic system harvesting energy from waves near the shore in calm seas

The aim of this paper is to illustrate the design of a new wave energy converter, composed of a point absorber and a hydraulic system (power take off) and sized for recovering energy in calm seas from waves near the shore. The point absorber is consisting of a rectangular shaped buoy integrating a piston pump. The set buoy‐pump oscillates under the waves action and moves natural water in a closed circuit hydraulic system (power take off) composed of a piping connecting the piston pump itself, a pressurized reservoir, a hydraulic turbine and a discharge tank. The methodology adopted for designing the main constituents involves a 1D mathematical model, settled for understanding the motion of the buoy under the hypothesis of regular waves and fully developed sea, and a sizing procedure applied for the design of all the components of the hydraulic system. The project related to the Calabrian site of Cetraro (Mediterranean Sea—south Italy) led to designing a system with a 4 m large buoy, associated with a small 13 cm diameter micro Pelton turbine, so that more than 22 000 kWh could be recovered in a year.     

Implications of sequential use of UV and ozone for drinking water quality

The formation of bromate levels exceeding the drinking water standard of 10 microg L-1 may impose the reduction of ozone doses used in the treatment of drinking water. This paper illustrates the procedure of evaluating the use of reduced ozone doses while implementing an additional UV disinfection step for an actual drinking water treatment plant. Ozonation was performed at low ozone doses in bench-scale experiments with a pretreated river water from the Paris area (France). At the low ozone dose of 0.5 mg L-1, bromate formation could be kept below 0.4 microg L-1, while inactivation of vegetative bacteria and UV-resistant viruses was calculated to exceed 5 log units, and a substantial decoloration (31% of the absorption at lambda=254 nm) was achieved. Based on the measured transient ozone and OH radical concentrations, the oxidation of micropollutants was calculated. Fast reacting micropollutants containing phenol, amine or double bond moieties, such as sulfamethoxazole, diclofenac and 17-alpha-ethinylestradiol, were completely oxidized. Slow-reacting synthetic micropollutants, e.g., atrazine, iopromide and methyl tertiary butyl ether (MTBE), were oxidized by only 20%, 20% and 10%, respectively, and the taste and odor compounds 2-methylisoborneol (MIB) and geosmin by 40% and 50%, respectively. The addition of an UV treatment step to the existing treatment train, which should guarantee disinfection of ozone-resistant pathogenic microorganisms, including Cryptosporidium parvum oocysts, has negligible effects on water matrix components but may induce significant transformation of micropollutants. Overall, the combination of ozonation at reduced doses and UV treatment leads to an improved water quality with regard to disinfection, oxidation of micropollutants and minimization of bromate.     

Evaluation of image-based modeling and laser scanning accuracy for emerging automated performance monitoring techniques

Accurate and rapid assessment of the as-built status on any construction site provides the opportunity to understand the current performance of a project easily and quickly. Rapid project assessment further identifies discrepancies between the as-built and as-planned progress, and facilitates decision making on the necessary remedial actions. Currently, manual visual observations and surveying are the most dominant data capturing techniques but they are time-consuming, error-prone, and infrequent, making quick and reliable decision-making difficult. Therefore, research on new approaches that allow automatic recognition of as-built performance and visualization of construction progress is essential. This paper presents and compares two methods for obtaining point cloud models for detection and visualization of as-built status for construction projects: (1) A new method of automated image-based reconstruction and modeling of the as-built project status using unordered daily construction photo collections through analysis of Structure from Motion (SfM); (2) 3D laser scanning and analysis of the as-built dense point cloud models. These approaches provide robust means for recognition of progress, productivity, and quality on a construction site. In this paper, an overview of the newly developed automated image-based reconstruction approach and exclusive features which distinct it from other image-based or conventional photogrammetric techniques is presented. Subsequently the terrestrial laser scanning approach carried out for reconstruction and comparison of as-built scenes is presented. Finally the accuracy and usability of both of these techniques for metric reconstruction, automated production of point cloud models, 3D CAD shape modeling, and as-built visualizations is evaluated and compared on eight different case studies. It is shown that for precise defect detection or alignment tasks, image-based point cloud models may not be as accurate and dense as laser scanners' point cloud models. Nonetheless image-based point cloud models provide an opportunity to extract as-built semantic information (i.e., progress, productivity, quality and safety) through the content of the images, are easy to use, and do not need add burden on the project management teams by requiring expertise for data collection or analysis. Finally image-based reconstruction automatically provides photo alignment with point cloud models and enables image-based renderings which can remarkably impact automated performance monitoring and as-built visualizations.     

Occurrence and behaviour of linear alkylbenzenesulphonates, nonylphenol, nonylphenol mono- and nonylphenol diethoxylates in sewage and sewage sludge treatment

The fluxes of linear alkylbenzenesulphonates (LAS), nonylphenol (NP), nonylphenol monoethoxylate (NP1EO) and nonylphenol diethoxylate (NP2EO) through sewage and sludge treatment of 29 Swiss sewage treatment plants were investigated. Reversed-phase high-performance liquid chromatography (HPLC) was used to determine LAS. Normal-phase HPLC was employed to measure NP, NP1EO and NP2EO which are metabolites of the nonionic surfactants of the nonylphenol polyethoxylate type (NPnEO). Quantitative determinations were performed of raw sewage, primary and secondary effluents and of sewage sludge. Under normal conditions of sewage and sludge treatment, LAS were efficiently removed from the raw wastewater (> 99% w/w) and were partly transferred to the sewage sludge (15–20% w/w). About 50% (molar base) of NPnEO in the sewage were transformed to NP and accumulated in the digested sludge. Large variations existed among different sewage treatment plants. It was estimated that 1.0 g m⁻² y⁻¹ of LAS and 0.3 g m⁻² y⁻¹ of NP are applied with sewage sludge to Swiss soils.     

Phenylalanine Ammonia‐Lyase‐Catalyzed Deamination of an Acyclic Amino Acid: Enzyme Mechanistic Studies Aided by a Novel Microreactor Filled with Magnetic Nanoparticles

Phenylalanine ammonia‐lyase (PAL), found in many organisms, catalyzes the deamination of l ‐phenylalanine (Phe) to (E)‐cinnamate by the aid of its MIO prosthetic group. By using PAL immobilized on magnetic nanoparticles and fixed in a microfluidic reactor with an in‐line UV detector, we demonstrated that PAL can catalyze ammonia elimination from the acyclic propargylglycine (PG) to yield (E)‐pent‐2‐ene‐4‐ynoate. This highlights new opportunities to extend MIO enzymes towards acyclic substrates. As PG is acyclic, its deamination cannot involve a Friedel–Crafts‐type attack at an aromatic ring. The reversibility of the PAL reaction, demonstrated by the ammonia addition to (E)‐pent‐2‐ene‐4‐ynoate yielding enantiopure l ‐PG, contradicts the proposed highly exothermic single‐step mechanism. Computations with the QM/MM models of the N‐MIO intermediates from l ‐PG and l ‐Phe in PAL show similar arrangements within the active site, thus supporting a mechanism via the N‐MIO intermediate.