Deduction of a facile method to construct Antheraea mylitta silk fibroin/gelatin blend films for prospective biomedical applications

Blend films of two types (I and II) were prepared by mixing Antheraea mylitta silk fibroin (AMF) and gelatin solution in various blend ratios via the solution casting method. Two different crosslinkers, namely glutaraldehyde and genipin, were used during blend preparation. The structural characteristics and thermal properties of the blend films were examined by Fourier transform infrared (FTIR) spectroscopy, X‐ray diffraction (XRD), Thermogravimetric analysis (TGA) and Diffrential scanning calorimetery (DSC). The FTIR spectra showed conformational alterations in type I blend films while type II films attained high β‐sheet crystallinity. The XRD diffractograms presented a high degree of crystallinity in type II blend films compared to type I, which showed an almost amorphous structure. Further, thermal and biological studies were conducted on type II films. According to the TGA thermograms, the degradation temperature of the crosslinked blend films shifted compared to pure gelatin and pure AMF films. Partial miscibility of the two components was indicated by DSC thermograms of the blends. The high water uptake capacity of type II blend films was found to imitate hydrogel behaviour. The blend films did not show any toxicity in 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyl tetrazolium bromide (MTT) assay and supported L929 fibroblast cell spreading and proliferation. The biodegradation of the blend films was significantly faster than the pure silk film. © 2020 Society of Industrial Chemistry     

Interface cracking between functionally graded coatings and a substrate under antiplane shear

Coating technology plays a significant role in a number of applications such as high temperatures, corrosion, oxidation, wear, and interface. In this paper, we investigate the interface cracking between ceramic and/or functionally graded coatings (FGM coatings) and a substrate under antiplane shear. Four coating models are considered, namely single layered homogeneous coating, double layered piece-wise homogeneous coating, single layered FGM coating and double layered coating with an FGM bottom coat. Mode III stress intensity factors (SIFs) are calculated for the different coating models. In the case of μ_L > μ₀ where μ₀ is the shear modulus of the substrate and μ_L the shear modulus of the material at the surface of the coating, it is found that the single layered FGM coating reduces SIF slightly, whereas the coating system with a top homogeneous layer and a thin FGM bottom layer reduces SIF significantly. In the case of μ_L < μ₀ the SIF is found to be larger for the FGM coatings than for the homogeneous coatings. The FGM coating, however, may still be superior to homogeneous coatings in this case as FGM coatings usually provide better bonding strength between the coating and substrate. Finally, the applicability of the SIF concept in the fracture of FGM coatings is discussed. Large modulus gradients in thin coatings may seriously restrict the application of SIFs as the SIF-dominant zone may fall into the crack tip nonlinear deformation and damage zone. The same argument exists for some interphase models in interface crack solutions.     

Haemangiopericytoma of the nasal cavity

Haemangiopericytoma of nose and paranasal sinuses is relatively uncommon tumour. It occurs in adults in sixth and seventh decades of life. In view of paucity of intranasal haemangiopericytoma old in Indian literature and young age of patient, we are reporting one case in 28-year-old female who presented with recurrent, profuse epistaxis.     

Effect of epitaxial realignment on the leakage behavior of arsenic-implanted,as-deposited polycrystalline Si-on-single crystal Si diodes

When dopants are indiffused from a heavily implanted polycrystalline silicon film deposited on a silicon substrate, high thermal budget annealing can cause the interfacial “native” oxide at the polycrystalline silicon-single crystal silicon interface to break up into oxide clusters, causing epitaxial realignment of the polycrystalline silicon layer with respect to the silicon substrate. Anomalous transient enhanced diffusion occurs during epitaxial realignment and this has adverse effects on the leakage characteristics of the shallow junctions formed in the silicon substrate using this technique. The degradation in the leakage current is mainly due to increased generation-recombination in the depletion region because of defect injection from the interface.     

Retroviral gene transfer is inhibited by chondroitin sulfate proteoglycans/glycosaminoglycans in malignant pleural effusions

Gene therapy may be an important adjuvant for treating cancer in the pleural space. The initial results of retroviral gene transfer to cancer cells in malignant pleural effusions revealed that transduction was markedly inhibited, and studies to characterize the inhibitory factor(s) were performed. The inhibition was contained within the soluble, rather than cellular, components of the effusions and was demonstrated with amphotropic, gibbon ape leukemia virus, and vesicular stomatitis virus-glycoprotein pseudotyped retroviral vectors. After excluding complement proteins, a series of studies identified chondroitin sulfates (CSs) as the inhibitory substances. First, treatment of the effusions with mammalian hyaluronidase or chondroitinases, but not Streptomyces hyaluronidase, abolished the inhibitory activity. Second, addition of exogenous CS glycosaminoglycans mimicked the inhibition observed with pleural effusions. Third, immunoassays and biochemical analyses of malignant pleural effusion specimens revealed CS in relevant concentrations within pleural fluid. Fourth, proteoglycans/glycosaminoglycans isolated from the effusions inhibited retroviral gene transfer. Analyses of the mechanism of inhibition indicate that the chondroitin sulfates interact with vector in solution rather than at the target cell surface. These results suggest that drainage of the malignant pleural effusion, and perhaps enzymatic pretreatment of the pleural cavity, will be necessary for efficient retroviral vector mediated gene delivery to pleural metastases.     

Enhanced neointimal growth in cultured rabbit aorta following in vivo balloon angioplasty

We have used in vivo balloon catheterization in combination with in vitro organ culture to develop a model system for vascular neointima formation. A Fogarty balloon catheter was used to deendothelialize and rupture the internal elastic lamina of aortae in adult rabbits. After three d of recovery, aortae were harvested, divided into segments, and placed into organ culture. We obtained a daily index of cell proliferation in cultured vessels using [3H]thymidine incorporation into DNA. Also, segments were collected and processed for routine histology or immunohistochemistry. Aortic segments that had undergone ballooning 3 d before harvest and then cultured exhibited diffuse neointimal growth after several d in vitro, whereas those from sham-operated (nonballooned) rabbits showed generally only a single endothelial cell layer that is characteristic of normal intima. Aortae that were harvested, balloon-damaged in vitro, and then cultured exhibited no neointimal growth. The neointima that developed in cultured segments from in vivo ballooned rabbits was primarily of smooth muscle cell origin as determined by positive immunostaining for alpha-smooth muscle actin. The intima:media thickness ratios were significantly higher in aortic segments from ballooned rabbits at harvest and after 4 or 7 d in culture compared with those from nonballooned rabbits. Also, the [3H]thymidine index was higher in the in vivo ballooned aorta compared to non-ballooned or in vitro ballooned vessel. We conclude that ballooning in vivo followed by exposure to blood-borne elements produces an enhanced proliferative response in cultured vessels that is distinct from other in vitro models of neointimal growth.     

Analysis of fly ash heavy metal content and disposal in three thermal power plants in India

The study investigates the heavy metal content of fly ash and bottom ash from three major power plants in North India, using flame atomic absorption spectrometry. It also studies the prevalent disposal methods used at these sites. The ashes were analysed for the presence of Cr, Mn, Pb, Zn, Cu, Ni and Co and detectable levels of all were found in both fly ash and bottom ash. The concentrations of Cr and Zn were highest while Co concentration was less. The wet disposal method is used in two of the power plants (site 1 and site 3). Neither of the sites uses ash pond lining in the construction of the ash ponds, hence leaching of the heavy metals is possible. Site 2 has adopted 100% dry disposal system which allows better utilization but incurs additional costs. Better management practices, increased utilization and proper disposal practices need to be undertaken to minimize the adverse environmental impact.     

Effect of austenitization on austempering of copper alloyed ductile iron

A ductile iron containing 0.6% copper as the main alloying element was austempered at a fixed austempering temperature of 330 °C for a fixed austempering time of 60 min after austenitization at 850 °C for different austenitization periods of 60, 90, and 120 min. The austempering process was repeated after changing austenitization temperature to 900 °C. The effect of austenitization temperature and time was studied on the carbon content and its distribution in the austenite after austenitization. The effect of austenitization parameters was also studied on austempered microstructure, structural parameters like volume fraction of austenite, X _γ , carbon content C _γ , and X _γ C _γ , and bainitic ferrite needle size, d _α after austempering. The average carbon content of austenite increases linearly with austenitization time and reaches a saturation level. Higher austenitization temperature results in higher carbon content of austenite. As regards the austempered structure, the lowering austenitization temperature causes significant refinement and more uniform distribution of austempered structure, and a decrease in the volume fraction of retained austenite.