Future Hydrological Drought Analysis Considering Agricultural Water Withdrawal Under SSP Scenarios

Hydrological drought is assessed through river flow, which depends on river runoff and water withdrawal. This study proposed a framework to project future hydrological droughts considering agricultural water withdrawal (AWW) for shared socioeconomic pathway (SSP) scenarios. The relationship between AWW and potential evapotranspiration (PET) was determined using a deep belief network (DBN) model and then applied to estimate future AWW using projections of the twelve global climate models (GCMs). 12 GCMs were bias-corrected using the quantile mapping method, climate variables were generated, and river flow was estimated using the soil and water assessment tool (SWAT) model. The standardized runoff index (SRI) was used to project the changes in hydrological drought characteristics. The results revealed a higher occurrence of severe droughts in the future. Droughts would be more frequent in the near future (2021–2060) than in the far future (2061–2100) and more severe when AWW is considered. Droughts would also be more severe for SSP5-8.5 than for SSP2-4.5. The study revealed that the increased PET due to rising temperatures is the primary cause of the increased drought frequency and severity. The AWW will accelerate the drought severities in the future in the Yeongsan River basin.

     

Comparison of Bougainvillea spectabilis and Bougainvillea glabra species inhibited in Pakistan based on microscopic studies: Light microscope and scanning electron microscope

The anatomical variations of two plants from the Nyctaginaceae family, Bougainvillea spectabilis and Bougainvillea glabra, were studied using light and scanning electron microscopy methods in this work. Bougainvillea is a dicotyledonous with defensive traits that can withstand extreme (hot and dry) settings; according to the findings, crystal inclusions in cells, woody spines, and an abnormal development pattern are all features that help them survive against predators and are unique to this species. The Bougainvillea plant's leaves are arranged in simple pattern, alternate to each other along stem having an undulate leaves edge and an oval form. The xylem and phloem, palisade, parenchyma midrib, spongy mesophyll, raphide crystal bundles, and trichomes were all visible when bracts and leaves were transversally sectioned and dyed with toluidine blue O (TBO). The presence of crystals was confirmed by a detailed examination of the transverse leaves by using bright-field and cross-polarizing microscopy. Dissecting microscopic examination showed that all the leaves revealed leaves venation pattern that had midvein, lateral veins areoles, and trichomes. Although trichomes have been identified on both sides, a closer look at a cleaned leaf dyed with TBO showed multicellular abundant trichomes on adaxial surface. Stomata complexes were typically found on the abaxial surface of the leaf according to epidermal peels. Present studies also showed that on adaxial side, stomata were lesser in number or were absent and also showed that the morphologies of the pavement cells on the adaxial and abaxial sides of the leaf differed.     

Investigation of structural,optical, electrical,and magnetic properties of Fe-doped La0.7Sr0.3MnO3 manganites

In this work, the physical properties of nanocrystalline samples of La_0.7Sr_0.3Mn_1−xFe_xO₃ (0.0 ≤ x ≤ 0.20) perovskite manganites synthesized by the reverse micelle (RM) technique were explored in detail. The phase purity, crystal structure, and crystallite size of the samples were determined using X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. All the samples had rhombohedral crystal structure and crystallite size increased with increase in Fe content in La_0.7Sr_0.3MnO₃. The scanning electron micrographs (SEMs) exhibited smooth surface morphology and nonuniform shape of the particles. The optical properties studied using UV-visible absorption spectroscopy revealed a decrease in the absorbance and optical band gap with an increase in Fe content in La_0.7Sr_0.3MnO₃ compound. The temperature-dependent resistivity measurements revealed semiconducting nature of x = 0 and 0.1 samples up to the studied temperature range, while a metal-to-insulator transition was observed at higher Fe doping. Magnetic studies revealed weak ferromagnetism in all the samples and a reduction in the maximum magnetization with an increase in Fe content. A close correlation between electrical transport and magnetic properties was observed with the doping of Fe ion in La_0.7Sr_0.3MnO₃ at Mn site. These results advocate strong interactions associated with the double exchange mechanism among Fe³⁺ and Mn³⁺ ions.     

On a class of mixed EWMA-CUSUM median control charts for process monitoring

Monitoring of any manufacturing, production, or industrial process can be controlled and improved by removing these special cause of variations using control charts. Shewhart-type control charts are effective to control a large amount of special variations, whereas, cumulative sum (CUSUM) and exponentially weighted moving average (EWMA) charts detect small and moderate variations efficiently in the process parameters. Monitoring of location parameter can be done with mean control charts under the assumption that the parameters are known or correctly estimated from in-control samples and data are free from outliers (but in practice data occasionally have outliers). In this study, we have proposed generalized mixed EWMA-CUSUM median control charts structures for known and unknown parameters based on auxiliary variables for detecting shifts in process location parameter. The proposed charts are compared with the corresponding charts for the mean, based on contaminated and uncontaminated data. Different performance measures are used to evaluate the performance of proposed control charts and revealed through results that the median-based charts are more sensitive to detect a shift in process location parameter in the presence of outliers. An illustrative example using real data is also shown for practical consideration.     

Halogenation effect promoted low bandgap polymers based on asymmetric isoindigo unit with low energy loss

To optimize the energy levels of the structural framework of isoindigo polymers, a series of asymmetric isoindigo based low bandgap polymers with chlorine, fluorine and thiazole substituents was constructed and their optical, electrochemical and photovoltaic properties were comparatively evaluated for the impact of different substitutions. In comparison with the polymer based on 2,2'‐bithiophene and isoindigo unit (PTi) with non‐substituted bithiophene as the donor moiety, the highest occupied molecular orbital energy level for the newly synthesized polymers is significantly decreased, and in turn an improvement of the open‐circuit voltage (V_OC) is noted in the corresponding photovoltaic devices. More importantly, combined with a low bandgap of 1.32 eV, the energy losses (E_loss) could be reduced to 0.61 eV for polymer based on chlorinated 2,2'‐bithiophene and isoindigo unit (PCl). In addition, the halogen moieties are observed to be superior in device fabrication and give better values than the thiazole substituent. Both fluorinated and chlorinated polymer donors exhibited improved performance compared with the original polymer PTi. Consequently, this work not only presents the influence of different electron withdrawing substituents on the physicochemical and photovoltaic performance, but also backs the concept of how to reduce the energy loss via the heteroatom effect. © 2020 Society of Chemical Industry     

Synthesis of Au/UiO-66-NH2/Graphene composites as efficient visible-light photocatalysts to convert CO2

The production of new solar fuel through CO₂ photocatalytic reduction has aroused tremendous attention in recent years because of the increased demand of global energy sources and global warming caused by the mass concentration of CO₂ in the earth's atmosphere. In this work, UiO-66-NH₂ was co-modified by the Au nanoparticles (Au-NPs) and Graphene (GR). The resultant nanocomposite exhibits a strong absorption edge in visible light owing to the surface plasmon resonance (SPR) of Au-NPs. More attractively, Au/UiO-66-NH₂/GR displays much higher photocatalytic activity (49.9 μmol) and selectivity (80.9%) than that of UiO-66-NH₂/GR (selectivity: 71.6%) and pure UiO-66-NH₂ (selectivity: 38.3%) for the CO₂ reduction under visible light. The enhanced photocatalytic performance is primarily dued to the surface plasmon resonance (SPR) of Au-NPs, which could enhance the visible light absorption. The GR sheets could play as an electron acceptor with superior conductivity and thus suppress the recombination of electrons and holes. Besides, the GR could also improve the dispersibility of UiO-66-NH₂ so as to expose more active sites and strengthen the capture of CO₂. The contact effect and synergy effect among different samples are strengthened in the ternary composites and the photocatalytic performance is therefore improved. This study demonstrates a MOF based hybrid composite for efficient photocatalytic CO₂ reduction, the findings not only prove great potential for the design and application of MOFs-based materials but also bring light to novel chances in the development of new high performance photocatalysts.     

Recent developments in catalyst synthesis using DBD plasma for reforming applications

The catalyst has a significant role in gas processing applications such as reforming technologies for H₂ and syngas production. The stable catalyst is requisite for any industrial catalysis application to make it commercially viable. Several methods are employed to synthesize the catalysts. However, there is still a challenge to achieve a controlled morphology and pure catalyst which majorly influences the catalytic activity in reforming applications. The conventional methods are expansive, and the removal of the impurities are major challenges. Nevertheless, it is not straightforward to achieve the desired structure and stability. Therefore, significant interest has been developed on the advanced techniques to take control of the physicochemical properties of the catalyst through non-thermal plasma (NTP) techniques. In this review, the systematic evolution of the catalyst synthesis using NTP technique is elucidated. The emerging DBD plasma to synthesized and effective surface treatment is reviewed. DBD plasma synthesized catalyst performance in reforming application for H₂ and syngas production is summarised. Furthermore, the status of DBD plasma for catalyst synthesis and proposed future avenues to design environmentally suitable and cost-effective synthesis techniques are discussed.     

Investigation of improved dielectric and thermal properties of ternary nanocomposite PMMA/MXene/ZnO fabricated by in-situ bulk polymerization

Electric power system applications demand for high-temperature dielectric materials. The improved performance of polymer nanocomposites requires improvement in their thermal conductivity & stability, dielectric stability and processing technique. However, they often lose their dielectric properties with a rise in temperature. Here, we offer a solution by incorporating electrically conducting material (MXene) and semiconducting inorganic nanoparticles (ZnO NPs) into an insulating PMMA polymer matrix to maintain high dielectric constant, both at the room and high temperature. Therefore, to achieve desirable thermal and dielectric properties is the main objective of the present study based on the homogeneous distribution of the nanofillers by in-situ bulk polymerization assisted by strong sonication in the corresponding polymer. The introduction of MXene and ZnO NPs into the PMMA not only acquires a substantial increment in the dielectric constant, to attain a value 437, with minimum energy loss of 0.36 at 25 Hz, but also improves the thermal conductivity of PMMA up to 14 times by causing the reduction of thermal resistance, which is actually responsible for the poor thermal conductivity of amorphous pure PMMA polymer. More importantly, hybrid PMMA/4:2 wt% MXene:ZnO nanocomposite leads to an excellent thermal stability. Moreover, further characterization of the synthesized nanocomposites by FTIR, SEM and XRD leads to the evaluation of strong interaction of ternary components with PMMA matrix.