Structural Aspects of P2-Type Na0.67Mn0.6Ni0.2Li0.2O2 (MNL) Stabilization by Lithium Defects as a Cathode Material for Sodium-Ion Batteries

A known strategy for improving the properties of layered oxide electrodes in sodium-ion batteries is the partial substitution of transition metals by Li. Herein, the role of Li as a defect and its impact on sodium storage in P2-Na_0.67Mn_0.6Ni_0.2Li_0.2O₂ is discussed. In tandem with electrochemical studies, the electronic and atomic structure are studied using solid-state NMR, operando XRD, and density functional theory (DFT). For the as-synthesized material, Li is located in comparable amounts within the sodium and the transition metal oxide (TMO) layers. Desodiation leads to a redistribution of Li ions within the crystal lattice. During charging, Li ions from the Na layer first migrate to the TMO layer before reversing their course at low Na contents. There is little change in the lattice parameters during charging/discharging, indicating stabilization of the P2 structure. This leads to a solid-solution type storage mechanism (sloping voltage profile) and hence excellent cycle life with a capacity of 110 mAh g^-1 after 100 cycles. In contrast, the Li-free compositions Na_0.67Mn_0.6Ni_0.4O₂ and Na_0.67Mn_0.8Ni_0.2O₂ show phase transitions and a stair-case voltage profile. The capacity is found to originate from mainly Ni³⁺/Ni⁴⁺ and O^2-/O^2-δ redox processes by DFT, although a small contribution from Mn⁴⁺/Mn⁵⁺ to the capacity cannot be excluded.     

Evaluation of a commercial electronic nose system coupled with universal gas sensing chamber for sensing indicator compounds associated with meat safety

This study was conducted to evaluate the performance of a commercial electronic nose (Cyranose 320?) for sensing indicator compounds (ethanol and acetic acid) associated with spoiled beef. The present study reported the sensitivity of an array of 32 sensors to ethanol and acetic acid. Different vapor concentrations of ethanol (37, 100, 250 and 500 ppm) and acetic acid (38, 75, 100, 200 and 300 ppm) were tested to evaluate the performance of the commercial system. An in-house designed universal gas sensing and characterization system was coupled with the electronic nose system to generate the desired gas concentration. The raw smell print patterns were obtained and analyzed for individual and multiple detectors. Tukey’s multiple comparison technique was performed to analyze the response of individual detectors. Area above and below the baseline were selected as two features for pair wise comparison of the detectors. Different sensors showed different responses between various concentrations of gases. Analysis of multiple detectors was performed using linear and quadratic discriminant analysis (LDA and QDA) along with bootstrap. LDA along with bootstrap provided the highest total classification accuracies of 94.34 % between 100 and 200 ppm of acetic acid. QDA provided higher total classification accuracy of 89.69 % at lower concentration level of 38 and 75 ppm for acetic acid and 84.78 % between 37 and 100 ppm of ethanol. Hence, QDA was a better model of choice at lower concentrations. This study proved non-selective nature of sensors and showed that simultaneous use of multiple sensor information provided better classification accuracy for discriminating various gas concentrations as compared to using individual sensor output.     

Recovery of copper from a surface altered chalcopyrite contained ball mill spillage through bio-hydrometallurgical route

Bioleaching studies for chalcopyrite contained ball mill spillages are very scarce in the literature. We developed a process flow sheet for the recovery of copper metal from surface activated (600 °C, 15 min) ball mill spillage through bio-hydrometallurgical processing route. Bioleaching of the activated sample using a mixed meso-acidophilic bacterial consortium predominantly A. ferrooxidans strains was found to be effective at a lixiviant flow rate of 1.5 L/h, enabling a maximum 72.36% copper recovery in 20 days. Mineralogical as well as morphological changes over the sample surface were seen to trigger the bioleaching efficiency of meso-acidophiles, thereby contributing towards an enhanced copper recovery from the ball mill spillage. The bio-leach liquor containing 1.84 g/L Cu was purified through solvent extraction using LIX 84I in kerosene prior to the recovery of copper metal by electrowinning. Purity of the copper produced through this process was 99.99%.     

Coupled acoustic-shell model for experimental study of cell stiffness under acoustophoresis

Under the influence of acoustic radiation force, particles can be trapped and deformed at the pressure node in a microfluidic channel. Based on this principle, the elastic modulus of biological cells can be estimated. In this study, a numerical framework, consisting of a boundary element model for acoustic field and an axisymmetric shell model, is developed to simulate the cell deformation under acoustic radiation force. The boundary element model is used to calculate the radiation traction exerted on the cell surface. The cell membrane deformation due to this traction is simulated by using the axisymmetric shell model. The Young’s moduli of algae and red blood cell membranes are then estimated by comparing the experimental observation with the simulated membrane deformation. It is found that the value of Young’s modulus of the red blood cell membrane is lower than that of algae cell membrane. Furthermore, for both cells, the estimated Young’s moduli are negligible compared to the bulk moduli of the cells reported in the previous studies.     

Effect of MgO in the microstructure formation of zirconia mullite composites from sillimanite and zircon

The effect of MgO additive on the structural, microstructural and hardness properties of zirconia mullite (MUZ) has been discussed. The MgO additive in MUZ not only stabilizes the cubic zirconia phase but also acts as a sintering aid for the formation of cross-linked mullite grains. The electron micrographs of plasma fused MgO–MUZ shows a uniform arrangement of platelet structure of mullite and dendrite structure of zirconia on mullite surface. The micrograph of plasma sintered composites shows a ladder like structure and a complete cross-linked mullite grains whereas the surface morphology of conventionally sintered composites clearly indicates the presence of small and big grains close packed to each other. Appreciable hardness and higher optical band gap have been observed for plasma fused MgO–MUZ composites. A complete dissociation of sillimanite and zircon has been occurred in plasma fused composites for the complete conversion of MUZ whereas the complete dissociation of sillimanite and zircon has not observed in plasma sintered and conventionally sintered composites. These observations have been realized from the X-ray diffraction and Fourier transform infrared studies.     

Distribution Network Assessment using EPANET for Intermittent and Continuous Water Supply

Drawbacks of intermittent water supply system and inability to shift to continuous supply mode is the main challenge in developing countries. The suitability of the infrastructure laid over past two to three decades to meet the 24/7 demand of todays population is the issue for many water mangers. The present study addresses this issue using EPANET software for a pilot study area in Nagpur city, India. GIS maps, field survey data, remote sensing data and in-situ measurements of pressure and water quality are used in model simulation study. Total 96 artificial reservoirs are inserted into the network which replicate the end-user practices of excess water withdrawal. Reservoirs are assumed connected to damand nodes with equivalent diameter pipes for intermittent supply simulation. For continuous supply, demand multipliers are derived using Monte Carlo simulation. Bulk decay coefficient 0.17 day^?1 for residual chlorine is used in water quality simulation. Simulation scenario of intermittency indicates existing network is not suitable to maintain desired headloss, and pressure in most of the pipes is very low (<1 m). Water age and water quality problems reveal that rehabilitation of distribution mains and critical pipes in the central part is primarily important before implementing 24/7 water supply scheme in the study area.     

The Syntheses and Characterization of Interpenetrating Polymer Networks (IPNs) Derived from Cardanol-Based Dye and Linseed Oil-Based Polyurethanes

Interpenetrating Polymer Networks, from glycerol modified linseed oil polyurethanes and cardanol-based dyes, which are yet to be extensively studied were synthesized using benzoyl peroxide as initiator and ethylene glycol dimethacrylate as cross-linker. These polymers were characterized by Fourier transform infrared spectra, thermal analysis techniques such as thermogravimetric analysis, derivative thermogravimetry and differential thermal analysis. The kinetic parameters such as activation energy and orders of reaction were ascertained using Freeman-Carroll and Freeman-Anderson methods. The effects of changes in polyurethane to dye monomer weight ratio on the properties of such polymers were investigated at 1.2 and 1.6 NCO/OH ratios.     

Optimization of Polishing Conditions for Long Grain <Emphasis Type="Italic">Basmati</Emphasis> Rice in a Laboratory Abrasive Mill

Rice milling operation is a very energy-intensive process. The major qualities of the rice which are taken into consideration while milling are the degree of milling and head rice yield. A laboratory abrasion polisher, modified by attaching a humidifying and cooling unit, was used to polish long-grain Pusa Basmati rice in order to optimize the polishing conditions. Polishing experiments were carried out using central composite design for a factorial with a central point, at different initial grain temperatures (5–25 °C) and milling chamber temperatures (11–25 °C) at a constant humidity level of 95 ± 2% for different time intervals. Models capable of predicting the quality of milled rice were developed using response surface methodology and used to determine optimum processing conditions. Responses such as degree of milling (DOM), broken content, and specific energy consumption were used to assess product quality. Optimum milling conditions of a minimum of 10% DOM, a broken content of 8%, and a specific energy consumption of 11 kJ/DOM were obtained at a milling chamber temperature of 11 °C, an initial grain temperature of 15 °C, and a milling period of 180 s.     

Electrochemical insertion of Sr ions onto nano δ-MnO2 particles

Manganese dioxide is known to be an important electroactive material for supercapacitors. Generally, δ-MnO₂ is subjected to electrochemical characterization studies in aqueous electrolytes of Na₂SO₄. It exhibits capacitance behaviour in the potential range between 0 and 1.0 V vs. SCE (saturated calomel electrode). In the present study, it is shown that δ-MnO₂ exhibits capacitance behaviour in Sr(NO₃)₂ electrolytes also. The suitable potential range in this electrolyte is also found to be 0-1.0 V. Specific capacitance measured in Sr(NO₃)₂ electrolyte is 192 F g^− 1. X-ray photoelectron spectroscopy data confirm that Sr²⁺ ions get inserted onto δ-MnO₂ nanoparticles.     

Multiple genetic aberrations including evidence of chromosome 11q13 rearrangement detected in pituitary adenomas by comparative genomic hybridization

OBJECT: This study was conducted to determine whether comparative genomic hybridization (CGH) is a more sensitive method for detecting genetic aberrations than other tests currently in use. METHODS: The authors used CGH to examine 40 primary and 13 recurrent adenomas obtained from 52 patients for loss and gain of genetic material. Copy number aberrations (CNAs) were detected in 25 (48%) of the 52 patients studied. The chromosomes affected were, in order of decreasing frequency, 11, 7, X, 1, 8, 13, 5, 14, 2, 6, 9, 10, 12, 3, 18, 21, 4, 16, 15, 19, 22, and Y. Endocrinologically active adenomas were more likely to contain (p = 0.009) and had a greater number (p = 0.003) of CNAs. Of 26 adenomas with CNAs, 18 showed multiple aberrations involving entire chromosomes or chromosome arms. The most frequent CNA involving a chromosome subregion, which was present in four (8%) of 53 adenomas, was the loss of all chromosome 11 material except for a preserved common segment containing 11q13. Immunoperoxidase staining did not detect cyclin D1 expression in those four cases, making cyclin D1 an unlikely target of this rearrangement. CONCLUSIONS: These findings indicate that genetic abnormalities are present in pituitary adenomas at a higher rate than previously reported, are associated with endocrinological activity, and often involve several chromosomes. Rearrangement at 11q13 may inactivate a tumor suppressor gene or activate an oncogene that is important in the initiation or progression of sporadic pituitary adenomas.