A Smart Hyperthermia Nanofiber-Platform-Enabled Sustained Release of Doxorubicin and 17AAG for Synergistic Cancer Therapy

This study demonstrates the rational fabrication of a magnetic composite nanofiber mesh that can achieve mutual synergy of hyperthermia, chemotherapy, and thermo-molecularly targeted therapy for highly potent therapeutic effects. The nanofiber is composed of biodegradable poly(ε-caprolactone) with doxorubicin, magnetic nanoparticles, and 17-allylamino-17-demethoxygeldanamycin. The nanofiber exhibits distinct hyperthermia, owing to the presence of magnetic nanoparticles upon exposure of the mesh to an alternating magnetic field, which causes heat-induced cell killing as well as enhanced chemotherapeutic efficiency of doxorubicin. The effectiveness of hyperthermia is further enhanced through the inhibition of heat shock protein activity after hyperthermia by releasing the inhibitor 17-allylamino-17-demethoxygeldanamycin. These findings represent a smart nanofiber system for potent cancer therapy and may provide a new approach for the development of localized medication delivery.     

Direct Injection of CRISPR/Cas9-Related mRNA into Cytoplasm of Parthenogenetically Activated Porcine Oocytes Causes Frequent Mosaicism for Indel Mutations

Some reports demonstrated successful genome editing in pigs by one-step zygote microinjection of mRNA of CRISPR/Cas9-related components. Given the relatively long gestation periods and the high cost of housing, the establishment of a single blastocyst-based assay for rapid optimization of the above system is required. As a proof-of-concept, we attempted to disrupt a gene (GGTA1) encoding the α-1,3-galactosyltransferase that synthesizes the α-Gal epitope using parthenogenetically activated porcine oocytes. The lack of α-Gal epitope expression can be monitored by staining with fluorescently labeled isolectin BS-I-B₄ (IB4), which binds specifically to the α-Gal epitope. When oocytes were injected with guide RNA specific to GGTA1 together with enhanced green fluorescent protein (EGFP) and human Cas9 mRNAs, 65% (24/37) of the developing blastocysts exhibited green fluorescence, although almost all (96%, 23/24) showed a mosaic fluorescent pattern. Staining with IB4 revealed that the green fluorescent area often had a reduced binding activity to IB4. Of the 16 samples tested, six (five fluorescent and one non-fluorescent blastocysts) had indel mutations, suggesting a correlation between EGFP expression and mutation induction. Furthermore, it is suggested that zygote microinjection of mRNAs might lead to the production of piglets with cells harboring various mutation types.     

Computer simulation of morphological changes of grain boundary precipitates growing by the ledge mechanism

A previously developed computer model was modified to simulate the growth of grain boundary precipitates which grow by the ledge mechanism. The ledges were assumed to be nucleated in the grain boundary region at constant, parabolically decreasing, and random rates and to grow under the control of volume diffusion of solute to or from the riser of ledges. At lower under coolings at which the motion of individual ledges is slow, late-nucleated ledges soon catch up with first-nucleated ones, and precipitates tend to extend along the grain boundary: the overall precipitate shape is essentially that of a grain boundary allotriomorph. At larger undercoolings, first-nucleated ledges move fast to form a protuberance similar to Widmanstätten sideplates, while late-nucleated ones stay near the grain boundary region. The transition of precipitate shape from one to the other occurs in a very narrow range of supersaturation. The results are compared with various characteristics of the growth of proeutectoid ferrite allotriomorphs and sideplates in Fe-C alloys documented in the literature.     

Effects of the thermal history on the hydraulic properties of slags

Glasses with two composition in the CaO---Al₂O₃---SiO₂ system were prepared with different cooling conditions. Glass A has a eutectic composition of wollastonite-gehlenite-rankinite and glass B has that of wollastonite-gehlenite-anorthite. The effects of the thermal history on the structure and hydraulic properties were discussed. Effects of cooling rate on the physical and chemical properties of glasses are found to be different with chemical composition of glass. Cooling rate affects the hydraulic reactivity and crystallization temperature, especially in glass A, but scarcely affects the physical properties such as chemical shift of AlK and surface basicity of the glass.     

Photocatalytic Property and Electronic Structure of Lanthanide-based Oxysulfides

Lanthanide-based oxysulfides and sulfide, LnTaO_3.5S_0.5, Ln₁₀OS₁₄ (Ln = La, Pr, Nd, Sm) and La₄In₅S₁₃, were successively synthesized by sulfurization in a flowing H₂S. The sulfurization decreased the band-gap energies from >4 eV to <3eV, because of the formation of occupied S3p orbitals on the top of valence band. In accordance with the small band gap, the H₂ evolution from a 0.01 M Na₂S and 0.01 M Na₂SO₃ solution system was observed under irradiation of light up to >500 nm. The rate of H₂ evolution under light irradiation of >500 nm increased in the order of Ni/LaTaO_3.5S_0.5 < Ru/La₁₀OS₁₄ < Pt/La₄In₅S₁₃.     

Local droplet diameter variation in a stirred tank

The local variation of droplet diameter in a stirred tank was measured in the vicinity of the impeller and at another region. The degree of difference in droplet diameter between regions increases with the impeller speed. A correlation equation between the local difference in droplet diameter and the frequencies of coalescence and circulation of the droplet was derived according to the circulation interaction model. The degree of local difference in droplet diameter was found to be controlled strongly by the ratio of coalescence to circulation frequency.     

Carbon Nanotubes Grown on the Surface of Cathode Deposit by Arc Discharge

Carbon nanotubes prepared by de arc discharge of graphite electrodes in He and CH₄ gas took markedly different morphology. Thick nanotubes embellished with many carbon nanoparticles were obtained by evaporation under high CH₄ gas pressure and high arc current. Thin and long carbon nanotubes were obtained under a CH₄ gas pressure of 50Torr and an arc current of 20A for the anode with a diameter of 6mm.     

Binary Adsorption Isotherms of Water and Ethyl Acetate Vapor for Materials Contained in a Box of a Tobacco Product

An experimental study has been carried out on the characteristics of binary adsorption isotherms of water and volatile flavor for typical materials used in a box of a tobacco product or cigarettes. Ethyl acetate chosen as a model for water-soluble volatile flavor. Binary adsorption isotherms for the tobacco, papers, filters, and activated carbons were measured with a flow-type multi-component adsorption system under the canstant conditions of temperature a t 303 K and vapor pressure of water a t 2.5 kPain the vapor pressure range of ethyl acetate from 0 to 4.2 kPa. A linear equation was applied to express the binary adsorption isotherms for the tobacco, papers and filters, while a Dubinin-Astakhov equation was applied for the activated carbons. The binary adsorption was characterized into three groups, depending on the selectivity as well as the mechanism of adsorption; i.e.(l) for tobacco and papers, water was adsorbed much greater rather than ethyl acetate, (2) for filters, ethyl acetate was adsorbed on the surface as great as water, (3) for activated carbons, ethyl acetate was adsorbed much greater onto their micropores rather than water. The results showed that ethyl     

Rapid detection cytomegalovirus pneumonia in recipients of bone marrow transplant: evaluation and comparison of five survey methods for bronchoalveolar lavage fluid

To detect cytomegalovirus-associated interstitial pneumonia (CMV-IP) in recipients of BMT in its earliest stage, five CMV methods were assessed for their usefulness using bronchoalveolar lavage fluid as the test specimen. Of the 43 cases enrolled in the study, PCR was positive in 12 cases, shell vial in eight, culture in eight and cytology in three. There were no positive cases in in situ hybridization. Based on this result, the 43 cases were classified into four groups: Group 1, three cases: positive in PCR, shell vial and cytology; Group 2, five cases: positive in PCR and shell vial; Group 3, four cases: positive only in PCR; and Group 4, 31 cases: negative in all CMV tests. Cases in Group 1 were judged as having the highest risk of overt CMV-IP. They were successfully treated with a combination of ganciclovir and immunoglobulin. Group 2 was diagnosed as having active CMV infection and ganciclovir monotherapy was effective for these patients. Groups 3 and 4 were not given anti-CMV therapy, but they were free from CMV-related manifestations throughout the study. The sensitivity and specificity of each survey method for the detection of Groups 1 and 2 were 1.0 and 0.89 in PCR, 1.0 and 1.0 in shell vial, 0.88 and 1.0 in culture, and 0.38 and 1.0 in cytology. Similarly, the positive and negative predictive values were 0.67 and 1.0 in PCR, 1.0 and 1.0 in shell vial, 1.0 and 0.97 in culture, and 1.0 and 0.88 in cytology. Thus, CMV survey on bronchoalveolar fluid was thought to be useful in detecting post BMT CMV-IP in its earliest stage.     

Non-atherosclerotic acute myocardial infarction

AIM: The aim of the study is to analyse the benefits and risks of PEE in patients, cared for by a team with many years experience. PATIENTS AND METHODS: From 16. 2. 1988 until 31. 12. 1993 246 PEEs (229 gastrostomies, 6 duodenostomies, 7 jejunostomies, 4 attempts) were performed on 234 patients (56% male, 44% female, mean age 68.3 years). 117 patients had tumorous and 117 neurological diseases. We used the pull technique with the Fresenius Freka PEG-system. Analysis was performed using a standardised documentation sheet which was filled out until the end of tube feeding. In total, we registered 39,678 days of tube feeding, 4513 of which were in hospitalized patients. RESULTS: The mean intubation time was 192.6 days (maximum 1496). In 8 cases, the tube could be explanted before the patient was discharged; 68 patients were discharged to a nursing home and 71 patients were allowed to go home. The tube-independent hospital lethality was 36.64%. A PEE-specific lethality had not been registered. Complications arose in a total of 37 patients (15.04%), 4 of which were severe (1.63%) Fifty-nine patients (25.43%) reported short-term feelings of ill health (vomiting, diarrhoea, pain). CONCLUSION: PEE is an effective and low-risk method of long-term nutrition. The advantages are simple insertion, safe handling by patients and relatives/nursing staff and the low cost.