Depicting the role of gas-solid interactions on the hydrodynamics of converging pneumatic riser

The understanding of the flow characteristics and effect of gas-solid interactions in pneumatic risers is fundamental to investigate to ensure effective design cost-effective operation. Thus, to understand the effect of gas-solid interactions on the hydrodynamics of newly proposed conversing risers, this study mainly focused on predicting pressure drop in the dilute phase pneumatic conveying system. The experiments were conducted in a converging riser having a convergence angle of 0.2693°. Various solid particles such as sago, black mustard, and alumina have been considered to study the effect of particle sizes and density on the pressure drop. The experimental outcomes indicate that the total pressure drop increases with an increase in the solid density and gas mass flow rate. Moreover, smaller particle sizes are also increased the pressure drop. An empirical correlation is developed for the prediction of total pressure drop ΔP_T in converging pneumatic riser via dimensional analysis. All dependent variables such as particle and air density, drag force, acceleration due to gravity, the mass flow rate of air and particle, the diameter of particle and converging riser, the height of converging riser were considered to develop the empirical correlation. The established relationship is tested, and experimental data have been fitted for its validation. The estimated relative error of less than 0.05 proved the significance of the developed correlation. Hence, it can be stated that the established relationship is useful in studying the effects of various parameters on the pressure drop across the length of the conversing riser.     

Microstructure induced ultra-high energy storage density coupled with rapid discharge properties in lead-free Ba0.9Ca0.1Ti0.9Zr0.1O3–SrNb2O6 ceramics

Novel lead-free (1-x)Ba_0·9Ca_0·1Ti_0·9Zr_0·1O₃-xSrNb₂O₆ ceramics were synthesized via a two-step high energy ball milling process. The evolution of microstructural properties, phase transformation, and energy storage characteristics was comprehensively investigated to assess the applicability of material in multi-layered ceramic capacitors. The substitution of SrNb₂O₆ (SNO) in Ba_0·9Ca_0·1Ti_0·9Zr_0·1O₃ (BTCZ) has resulted in substantial improvement in materials density along with a small increase in the grain size of the synthesized ceramic. A thorough microstructural investigation indicates an excellent dispersibility and compatibility between BTCZ and SNO phases. With an increase in SNO substitution, a transition from typical ferroelectric to relaxor ferroelectric has been observed, which has led to a significantly slimmer ferroelectric loop along with frequency dispersive dielectric properties. The optimized composition (i.e., x = 0.10) exhibits an ultra-high recoverable energy density of 2.68 J/cm³ along with a moderately high energy efficiency of 83.4%. Further, SNO substituted samples have also shown an enhancement in breakdown strength. The improvement in energy storage performance and breakdown strength of SNO substituted BTCZ composites are mainly attributed to relatively homogeneous grain morphology, optimum grain size, microstructural density, and improved grain boundary interface.     

Imperative role of electron microscopy in toxicity assessment: A review

Electron microscope (EM) was developed in 1931 and since then microscopical examination of both the biological and non-biological samples has been revolutionized. Modifications in electron microscopy techniques, such as scanning EM and transmission EM, have widened their applicability in the various sectors such as understanding of drug toxicity, development of mechanism, criminal site investigation, and characterization of the nano-molecule. The present review summarizes its role in important aspects such as toxicity assessment and disease diagnosis in special reference to SARS-COV2. In the biological system, EM studies have elucidated the impact of toxicants at the ultra-structural level in various tissue in conformity to physiological alterations. Thus, EM can be concluded as an important tool in toxicity assessment and disease prognosis.     

A Dynamic Inertial Weight Strategy in Micro PSO for Swarm Robots

Wireless Personal Communications - A relatively new area of research and development is Swarm Robotics. It is a part of the swarm intelligence field. In the proposed paper, we shall use swarm...     

Cross-Layer Energy Based Clustering Technique for Heterogeneous Wireless Sensor Networks

Wireless Personal Communications - Effect of combination of dual split ring resonator and electromagnetic bandgap structures over substrate integrated waveguide and half-mode substrate integrated...     

Mammalian-Cell-Driven Polymerisation of Pyrrole

A model cancer cell line was used to initiate polymerisation of pyrrole to form the conducting material polypyrrole. The polymerisation was shown to occur through the action of cytosolic exudates rather than that of the membrane redox sites that normally control the oxidation state of iron as ferricyanide or ferrocyanide. The data demonstrate for the first time that mammalian cells can be used to initiate synthesis of conducting polymers and suggest a possible route to detection of cell damage and/or transcellular processes through in situ and amplifiable signal generation.     

Thermal-aware task allocation and scheduling for periodic real-time applications in mesh-based heterogeneous NoCs

Real-Time Systems - With continuous technology scaling, the power density and hence the temperature of Network-on-Chip (NoC) may increase rapidly. This in-turn degrades the performance of the chip...     

Comparison between the use of thermoplasticized gutta‐percha and a polydimethyl siloxane‐based material in filling internal resorptive cavities using spiral computed tomography

To evaluate the fill of internal resorption cavities obturated with thermoplasticized gutta‐percha and GuttaFlow2 using CT scan. Twenty human maxillary anterior teeth were selected and root canals were prepared using ProTaper system to size F3. Irrigation was performed with 5 ml of 2.5% sodium hypochlorite (NaOCl) and 5 ml of 17% ethylenediaminetetraacetic acid (EDTA). Each root was then sectioned horizontally into two halves and semicircular cavities were prepared around the periphery of the root canal opening of each root half, using a round bur. Both the root halves were then fixed using cyanoacrylate glue. All the specimens were subjected to preoperative CT scan analysis to determine the volume of internal cavities. The samples were then randomly divided into two groups. In Group 1, the specimens were obturated with thermoplasticized gutta‐percha (E&Q system) and specimens in Group 2 were obturated using GuttaFlow2. All specimens were then subjected to postoperative CT scan analysis. The volume of voids in internal resorptive cavities were calculated, which was then used to estimate the amount of gutta‐percha filled. There was no significant difference in volume of internal resorptive cavities between thermoplasticized gutta‐percha and GuttaFlow2 groups before obturation (p = 0.466). However, after obturation there was a significant difference between both the groups, in which GuttaFlow2 demonstrated better fill (p = .014). Thermoplasticized gutta‐percha filled 81% of internal resorptive cavity while GuttaFlow2 filled 91%, respectively. GuttaFlow2 showed better fill than thermoplasticized gutta‐percha in the filling of internal resorptive cavities.     

Performance evaluation of breast lesion detection systems with expert delineations: a comparative investigation on mammographic images

Multimedia Tools and Applications - Performance of computerized diagnostic systems yearning to be approved by medical regulatory bodies must meet the expectations of human experts. Highly accurate...     

Study of crystal structure,dielectric, magnetic and magnetoelecrtic properties of xCoFe2O4-(1-x)Na0.5Bi0.5TiO3 composites

Multiferroic composites of spinel ferrite and ferroelectric xCoFe₂O₄ – (1-x)Na_0.5Bi_0.5TiO₃ (with x = 0.10,0.30,0.50) were efficiently prepared by standard solid state reaction mechanism. X-ray diffractometer was used to analyze crystal structure of the prepared composites. The observed XRD patterns of the composites comprise peaks of both the phases i.e. ferrite and ferroelectric, with no sign of secondary peaks. Rietveld refinement of XRD data further confirms the coexistence of these two phases with cubic (Fd3m) and rhombohedral (R3c) symmetry corresponding to ferrite and ferroelectric phase respectively. The 3-dimensional overview of crystal structure of pure CoFe₂O₄ and Na_0.5Bi_0.5TiO₃ and of composite 0.50CoFe₂O₄?0.50Na_0.5Bi_0.5TiO₃ is generated by using refined parameters. The dielectric constant (ε´) and dielectric loss (tanδ) values were recorded as a function of frequency ranging from 100?Hz to 7?MHz and at different temperatures. Both ε´ and tanδ follow dispersion pattern at lower frequencies while show frequency independent behavior at higher frequencies. The magnetic evaluation carried by analyzing M-H hysteresis loop reveals the ferrimagnetic characteristics of these composites. The highest value of magnetic moment is 1.12μ_B observed for composite 0.50CoFe₂O₄ – 0.50Na_0.5Bi_0.5TiO_3. Magnetoelectric (ME) voltage coefficient (α) was also demonstrated to observe the interaction between ferrite and ferroelectric phases. The highest value of α (72.72μV/Oe cm) is obtained for low ferrite composition 0.10CoFe₂O₄ – 0.90Na_0.5Bi_0.5TiO₃, which suggests the dependence of magnetoelectric response on the resistivity of the composites.