On Surface Losses in Direct Metal Laser Sintering Printed Millimeter and Submillimeter Waveguides

Different lengths of WR3 (220–330 GHz) and WR10 (75–110 GHz) waveguides are fabricated through direct metal laser sintering (DMLS). The losses in these waveguides are measured and modelled using the Huray surface roughness model. The losses in WR3 are around 0.3 dB/mm and in WR10 0.05 dB/mm. The Huray equation model is accounting relatively good for the attenuation in the WR10 waveguide but deviates more in the WR3 waveguide. The model is compared to finite element simulations of the losses assuming an approximate surface structure similar to the resulting one from the DMLS process.     

Localized corrosion of (lean) duplex stainless steels in immersion units of urban wastewater treatment plants

With lower alloying cost and higher mechanical properties, lean duplex stainless steels can be an alternative to the more commonly used austenitic stainless steels. However, these alloys are still not the preferred choice, probably due to a lack of field experience. A study was thus initiated in view of defining the limits of use of selected (lean) duplexes for urban wastewater treatment units. The present paper shows the localized corrosion performance of selected lean duplexes in chloride contaminated solutions. The results are compared with austenitic S30403 and S31603 and with the more standard duplexes S82441 and S32205. The effect of welding was also investigated. Exposures in field municipal wastewater plants were conducted for 1 year in low and high chloride content units. The results show that lean duplexes S32101 and S32202 can be used as alternatives to S30403 and S31603 in low chloride electrolytes. At 500 ppm of chloride content, duplex stainless steel S32304 showed better corrosion resistance than S30403 and S31603. For higher chloride contents (1000 ppm and above) the standard duplexes S82441 and S32205 shall be preferred.     

Effect of additives on the melt rheology and thermal degradation of poly[(R)‐3‐hydroxybutyric acid]

Thermal degradation of poly[(R)−3‐hydroxybutyric acid] (PHB) during melt mixing results in random chain scission that produces shorter polymer chains containing crotonic and carboxyl end groups. One way of preventing this serious reduction of molar mass is to add agents that react with at least two of the newly generated end groups. Different types of commercially available additives known to react with carboxyl group, namely bis(3,4‐epoxycyclohexylmethyl) adipate (BECMA), 2,2'‐bis(2‐oxazoline) (BOX), trimethylolpropane tris(2‐methyl‐1‐aziridinepropionate) (PETAP), triphenyl phosphate (TPP), tris(nonylphenyl) phosphate (TNPP), polycarbodiimide (PCDI), and poly(methyl metharylate‐co‐glycidyl methacrylate) (GMA.MMA) were mixed with PHB by cocasting from solution in chloroform. Dynamic rheology as well as measurements of molar masses before and after dynamic analysis was used to evaluate the effect of the additives on the melt stability of PHB. Measurements of the dynamic shear modulus and the molar mass of molten PHB with the additives PCDI and GMA.MMA showed a minor improvement on the thermal stability. Furthermore, TPP and TNPP did not affect the thermal stability of PHB, whereas the presence of BECMA, BOX, and PETAP gave a strong decrease of the dynamic modulus compared with neat PHB. © 2014 The Authors Journal of Applied Polymer Science Published by Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41836.     

Reduced autonomy workspace (RAW)—an interaction design approach for human-automation cooperation

Cognition, Technology & Work - Lack of support for handling a reduction of autonomy in a highly autonomous automation may lead to a stressful situation for a human when forced to take over. We...     

Finite-time consensus protocols for multi-dimensional multi-agent systems

A finite-time consensus protocol is proposed for multi-dimensional multi-agent systems, using direction-preserving signum controls. Filippov solutions and nonsmooth analysis techniques are adopted to handle discontinuities. Sufficient and necessary conditions are provided to guarantee infinite-time convergence and boundedness of the solutions. It turns out that the number of agents which have continuous control law plays an essential role in finite-time convergence. In addition, it is shown that the unit balls introduced by ?p norms, where p∈[1,∞], are invariant for the closed loop.     

Effect of filler on low temperature physical hardening of bitumen

Laboratory investigations of low temperature physical hardening of bitumen using a Bending Beam Rheometer (BBR) are described. The study encompasses five bitumens, three conditions with regard to additives and three testing temperatures (−15, −25 and −30°C). As additives, two fillers, hydrated lime and calcium carbonate, were used. The effect of the fillers on the isothermal low temperature hardening was evaluated with the aid of a physical hardening index. The viscoelastic nature of the bitumens and bitumen/filler mixtures was investigated utilising the Burger model, and the Burger parameters were used to calculate dissipation energy ratios (dissipated energy over stored energy) in each BBR test. The results obtained did not indicate any significant effect of the fillers on low temperature physical hardening. Analyses of the dissipation energy ratio showed a considerable capacity for energy dissipation, even at a temperature as low as −30°C. With few exceptions, more energy was dissipated than stored during a BBR test. It appears that the dissipation energy ratio is not necessarily related to the stiffness of the binder.     

Comparison of sediments and organisms in identifying sources of biologically available trace metal contamination

Sediments and an indicator organism (Macoma balthica, a deposit-feeding bivalve) were used to assess the relative importance of secondary sewage, urban runoff, a landfill containing metal-enriched ash wastes and a yacht harbor in contributing to Ag, Cu and Zn enrichment in South San Francisco Bay. Spatial gradients in sediments and organisms showed Cu and Ag enrichment originated from sewage discharge, whereas Zn enrichment originated from both sewage and urban runoff. Elevated concentrations of Cu in the sediments of the yacht harbor resulted from a high abundance of fine particles. The biological availability of Cu, Ag and Zn did not coincide with metal enrichment in sediments. The availability of Cu and Ag was greatest nearest the sewage outfall and greater in winter and spring than in summer. The availability of Zn in urban runoff appeared to be lower than the availability of Zn associated with sewage.     

Current asthma and respiratory symptoms among pupils in relation to dietary factors and allergens in the school environment

The aim was to study asthma and allergy in relation to diet and the school environment. Pupils (5-14 years) in eight schools received a questionnaire, 1014 participated (68%). Settled dust was collected on ALK-filters and analyzed for allergens from cat (Fel d 1), dog (Can f 1), horse (Equ cx), house dust mites (Der p 1, Der f 1), and cockroach (Bla g 1) by ELISA. In total, 6.8% reported cat allergy, 4.8% dog allergy, 7.7% doctor's diagnosed asthma and 5.9% current asthma, and 7.8% reported wheeze. Current asthma was less common among those consuming more fresh milk (P < 0.05) and fish (P < 0.01). Poly-unsaturated fatty acids was associated with more wheeze (P < 0.05), olive oil was associated with less doctors' diagnosed asthma (P < 0.05). Totally, 74% of the classrooms had mean CO(2) <1000 ppm. The median concentration per gram dust was 860 ng/g Fel d 1, 750 ng/g Can f 1 and 954 U/g Equ cx. Horse allergen was associated with more wheeze (P < 0.05), daytime breathlessness (P < 0.05), current asthma (P < 0.05) and atopic sensitization (P < 0.05). Dog allergen was associated with wheeze (P < 0.05) and daytime breathlessness (P < 0.05). The associations between allergens and respiratory symptoms were more pronounced among those consuming margarine, not consuming butter, and with a low intake of milk. In conclusion, cat, dog and horse allergens in schools could be a risk factor for asthma and atopic sensitization, and dietary factors may interact with the allergen exposure. PRACTICAL IMPLICATIONS: Previous school studies performed by us in mid-Sweden, showed that most classrooms did not fulfill the ventilation standards. In this study, most of the classrooms fulfilled the ventilation standard, but despite that had widespread allergen contamination. Most previous studies have focused on cat allergen, but our study has shown that also dog and horse allergens can be risk factors for asthma and allergy in schools. As allergens are transported from other environments, mainly the home environment, the main prevention should be to minimize transfer of allergens. This could be achieved by reducing contacts with furry pets and horses, or using different clothes at home and at school (e.g. school uniforms). Increased cleaning in the schools may reduce allergen levels, but the efficiency of this measure must be evaluated in further intervention studies. Finally, our study supports the view that dietary habits among pupils should not be neglected and interaction between dietary factors and indoor allergen exposure needs to be further investigated.