DETERMINATION OF TOTAL NITROGEN IN BARLEY AND MALT BY COMBUSTION METHOD—COLLABORATIVE TRIAL

A combustion method, relying on the Dumas principle, for the determination of total nitrogen in barley and malt, has been collaboratively tested by the Analysis Committee of the European Brewery Convention. Repeatability, r₉₅, and reproducibility, R₉₅, values were 0.063 and 0.116% of dry matter, respectively, for samples with nitrogen contents in the range 1.23 to 1.86% N of dry matter. There was no significant difference between these values for barley and malt. The Analysis Committee approved the adoption of the combustion method for inclusion in Analytica EBC as an alternative method.     

Biapenem versus imipenem/cilastatin in the treatment of complicated intra-abdominal infections: report from a Swedish Study Group

The objective of this study is to describe usual medical management and costs associated with recurrent respiratory infections in subjects with chronic obstructive bronchitis in France. A prospective survey was performed in Autumn 1994 on a national sample of private practice pulmonologists (N = 71). Two hundred forty-four patients, presenting at least one infection of the lower respiratory tract, were included. Bronchitis was the most frequent acute exacerbation observed (94%). Pneumonia concerned 9% of the patients. Biological tests, X-rays and pulmonary function tests were prescribed for, respectively, 59, 65 and 45% of the patients. Following the visit, 15 patients were hospitalized (6%). The direct medical cost per acute exacerbation was estimated 3,289 francs (1994 value) of which 60% were hospital-related. An average 10.4 day sick-leave was prescribed to 21% of patients in employment. For those patients, this sick-leave was associated to an extra-cost of 1,264-1,876 francs for Social Security and of 0-2,553 francs out of pocket per episode varying according to their Benefit Regimen.     

A study of patient-related characteristics and outcome after moderate injury

The purpose of all injury care is to restore patients' pre-injury functioning and to facilitate the return to normal activities. The aim of this prospective study was to describe and analyse psychiatric factors and other patient-related characteristics which influence long-term results after moderate injuries. One hundred and sixty-nine injured patients were randomized to go through a comprehensive psychosocial research protocol and to participate in the 12 month follow up. The 49 patients lost to follow-up differed significantly from all other patients. They were more often single, blue-collar workers with a lower educational level and had a less favourable psychosocial background, including alcohol abuse. The 120 patients who completed the follow-up were divided in two groups: the non-recovered group (NR, N = 58), patients reporting limitations in performing their work and/or limitations in carrying out housework and/or in social life, and the recovered group (R, N = 62), patients reporting full recovery or only minor limitations in exercise or sports 12 months after the injury. The NR patients were older (P < 0.05), had a slightly higher injury Severity Score (P < 0.01) and showed signs of depression both during the acute post-injury period and at 1 year follow up (P < 0.001). The multivariate analysis showed that measurements of pain and depression during the acute post-injury period were associated with the functional outcome after 12 months. Co-operation between injury and psychiatric units should be developed to identify patients needing psychosocial or psychiatric support during the early phase of rehabilitation.     

Fractionation of wheat proteins by counter-current distribution using aqueous two-phase systems containing propionic acid

Wheat proteins, soluble in diluted acid (glutenins), have been fractionated by counter-current distribution (CCD) using an aqueous two-phase system. The phase system is based on poly(ethylene glycol) and dextran but contains also 1% propionic acid and 6 mM magnesium sulfate. Approximately half of the bulk proteins partitioned to the upper phase while starch and other particles were recovered only into the lower phase. Whole wheat flour could be applied as sample for the CCD and 57 transfers were carried out. Starch and insoluble proteins remained stationary, while proteins followed the mobile phase to various degrees giving rise to a distribution pattern. The CCD pattern of the proteins showed distinct differences when various kinds of wheat flour were analysed. The patterns indicate that at least six subpopulations of proteins can be obtained by using two-phase extraction.     

A Mass Transport Model for Drying Wood under Isothermal Conditions

Mass transport in wood during drying can have different mechanisms at different periods of drying. Depending on the current moisture content (MC) and the structure of the wood, the driving forces for the mass transport are essentially different. Above the fiber saturation point (FSP), the lumens are partially saturated and the transport of liquid (free) water occurs as a consequence of capillary action. On the other hand, below the FSP, bound water within the cell walls is conveyed by diffusion, and water vapor in the lumens moves under influence of pressures gradient. Based on these considerations, a unified model is presented that takes into account the transport of the different moisture phases. Simulation of the drying of a Norway spruce sample at 50°C from about 135 to 7% MC is carried out using the finite element method (FEM). Comparison between the simulated average MC and the experimental observations obtained from X-ray computed tomography (CT) shows reasonable agreement. Possible simplifications in the model are briefly discussed as well as some aspects of the numerical implementation. Finally, the influence of absolute permeability on the average MC is studied.     

Generation and transmission of millimeter-wave data-modulated optical signals using an optical injection phase-lock loop

Generation and transmission of millimeter-wave data-modulated optical signals is presented using an optical injection phase-lock loop (OIPLL). Millimeter-wave signal generation is demonstrated with wide locking range, 30-GHz low phase noise level, -93 dBc/Hz, and a wide frequency tuning range, 4-60 GHz generation demonstrated using optical injection locking only, verified by using OIPLL in the 26-40 GHz range. The OIPLL is also used to transmit error-free 140-Mb/s amplitude shift keying and 68-Mb/s differential phase-shift keying (DPSK) modulated millimeter-wave signals over up to 65 km of uncompensated standard singlemode fiber. The DPSK system uses reference frequency modulation, eliminating the need for optical amplification.     

The influence of NaCl and CO2 on the atmospheric corrosion of magnesium alloy AZ91

The influence of NaCl and CO₂ on the atmospheric corrosion of magnesium alloy AZ91 is studied in the laboratory. Samples were exposed under carefully controlled air and flow conditions; the relative humidity was 95%, the temperature was 22.0°C and the concentration of CO₂ was < 1 ppm or 350 ppm. Different amounts of sodium chloride (0–70 μg/cm²) were added before exposure. The corrosion products were analyzed by gravimetry, ion chromatography, X‐ray diffraction and scanning electron microscopy. Mass gain and metal loss results are reported. The combination of high humidity and NaCl is very corrosive towards AZ91. However, the NaCl‐induced corrosion is inhibited by ambient concentrations of CO₂. Exposure in the absence of CO₂ gives rise to heavy pitting, with brucite, Mg(OH)₂, being the dominant corrosion product. In the presence of CO₂ a layer of hydrated magnesium hydroxy carbonate, Mg₅(CO₃)₄(OH)₂ · 5 H₂O forms. A tentative corrosion mechanism is presented that explains the behavior in the two environments.     

On linear-phase FIR filters with variable bandwidth

Recently, a particular structure for linear-phase finite-impulse response (FIR) filters with a variable bandwidth has received attention. In this structure, the overall transfer function is a weighted linear combination of fixed subfilters, with the weights being directly determined by the bandwidth. An advantage of this structure is that there are only a few adjustable parameters (weights), which results in a simple updating routine. However, in this paper, it is demonstrated that the use of a number of fixed regular overdesigned filters, each taking care of a part of the frequency region, in fact results in a lower overall arithmetic complexity. The price to pay is an increased group and phase delay.