Evaluation of direct light processing for the fabrication of bioactive ceramic scaffolds: Effect of pore/strut size on manufacturability and mechanical performance

Bioactive ceramic scaffolds for bone regeneration consisting of a three-dimensional mesh of interpenetrating struts with square section were fabricated via Digital Light Processing (DLP). The ability of the technique to manufacture 3D porous structures from β-tricalcium phosphate (β-TCP) powders with different dimensions of struts and pores was evaluated, identifying the possibilities and limitations of the manufacturing process. Small pore sizes were found to seriously complicate the elimination of excess slurry from the scaffold’s innermost pores. The effect of the strut/pore size on the mechanical performance of the scaffolds under compressive stresses was also evaluated, but no significant influence was found. Under compressive stresses, the structures resulted weaker when tested perpendicularly to the printing plane due to interlayer shear failure. Interlayer superficial grooves are proposed as potential failure-controlling defects, which could also explain the lack of a Weibull size effect on the mechanical strength of the fabricated DLP scaffolds.     

The Emi2 Protein of Saccharomyces cerevisiae is a Hexokinase Expressed under Glucose Limitation

Hexokinases catalyze glucose phosphorylation at the first step in glycolysis in eukaryotes. In the budding yeast Saccharomyces cerevisiae , three enzymes for glucose phosphorylation have long been known: Hxk1, Hxk2, and Glk1. In this study, we focus on Emi2, a previously uncharacterized hexokinase-like protein of S. cerevisiae . Our data show that the recombinant Emi2 protein (rEmi2), expressed in Escherichia coli , possesses glucose-phosphorylating activity in the presence of ATP and Mg ²⁺ . It was also found that rEmi2 phosphorylates not only glucose but also fructose, mannose and glucosamine in vitro . In addition, we examined changes in the level of endogenous Emi2 protein in S. cerevisiae in the presence or absence of glucose and a non-fermentable carbon source. We found that the expression of Emi2 protein is tightly suppressed during proliferation in high glucose, while it is strongly upregulated in response to glucose limitation and the presence of a non-fermentable carbon source. Our data suggest that the expression of the endogenous Emi2 protein in S. cerevisiae is regulated under the control of Hxk2 in response to glucose availability in the environment.     

A Multiplicative Model for Gauge R & R Studies

We introduce a multiplicative measurement error model and analyze a gauge R & R study with the new model using data from a sample exchange program. Some aspects of designing a gauge R & R study are considered. Also, we analyze data from a factorial experiment where the measurement error arises from the new model using a simultaneous analysis of experimental and gauge R & R study data. WinBUGS code for these analyses is provided. Copyright © 2014 John Wiley & Sons, Ltd.     

Impact and Assessment of Measurement Systems that Meet the 4:1 Rule

This article considers the impact of a measurement system that meets the 4:1 rule. Probabilities of accepting a bad part and rejecting a good part are evaluated. A simulation study calculates the increased estimates of the population standard deviation when the measurement error is ignored, where both non‐trending and trending populations are considered. Also, the impact of sample size is evaluated on estimates and upper confidence bounds of the measurement system standard deviation that are used to assess the 4:1 rule capability; both measurement systems from a single and multiple sources of variation are explored. Copyright © 2014 John Wiley & Sons, Ltd.     

Use of cryogenic machining to improve the adhesion of sphene bioceramic coatings on titanium substrates for dental and orthopaedic applications

Rods of commercially pure titanium were machined using standard oil-based emulsion and cryogenic cooling, and were then coated with sphene (CaTiSiO₅) bioceramic by spray coating using an automatic airbrush. The sphene bioceramic was synthesized in-situ starting from a suspension of polysiloxane that used as SiO₂ precursor, CaCO₃ and TiO₂ nanoparticles. The suspension was deposited on the machined substrates, which were heat treated up to 950?°C in order to promote the formation of sphene ceramic. The produced coated prototypes were characterized to evaluate the effect of the machining conditions on surface roughness and microstructure of the substrate, and thereby their effect on coating adhesion. Nanoindentation tests were employed to determine the hardness and elastic modulus of the coating through its thickness. Results showed that the reduced amount of defects on the surface of the cryo-machined substrates, contributed to increase the hardness, elastic modulus and adhesion strength of the coating-substrate interfaces compared to standard machined samples, therefore improving adhesion of the coating to the underlying substrate.     

Dynamic connection provisioning with shared protection in IP/WDM networks

Internet protocol (IP) traffic connections arrive dynamically at wavelength‐division multiplexing (WDM) network edges with low data rates compared with the wavelength capacity, availability, and quality‐of‐service (QoS) constraints. This paper introduces a scheme to be integrated into the control and management plane of IP/WDM networks to satisfy the availability and QoS required for IP traffic connections bundled onto a single wavelength (lightpath) in WDM networks protected by shared‐backup path protection (SBPP). This scheme consists of two main operations: (i) routing multi‐granular connections and traffic grooming policies, and (ii) providing appropriate shared protection on the basis of subscribers’ service‐level agreements in terms of data rate, availability, and blocking probability. Using the Markov chain process, a probabilistic approach is developed to conceive connection blocking probability models, which can quantify the blocking probability and service utilization of M:N and 1:N SBPP schemes. The proposed scheme and developed mathematical models have been evaluated in terms of bandwidth blocking ratio, availability satisfaction rate, network utilization, and connection blocking probability performance metrics. The obtained research results in this paper provide network operators an operational setting parameter, which controls the allocation of working and backup resources to dynamic IP traffic connections on the basis of their priority and data rate while satisfying their requirements in terms of bandwidth and availability. Copyright © 2013 John Wiley & Sons, Ltd.     

All‐subsets regression under effect heredity restrictions for experimental designs with complex aliasing

We consider an all‐subsets regression method for models under effect heredity restrictions for experimental designs with complex aliasing, whose number of potential main effects and two‐factor interactions exceed the number of runs. In this paper, we present an algorithm that systematically attempts to fit all such models. We illustrate the algorithm with two published experiments. Copyright © 2009 John Wiley & Sons, Ltd.     

Magnetovolume effects in manganese nitrides with antiperovskite structure

Magnetostructural correlations in antiperovskite manganese nitrides were investigated systematically for stoichiometric and solid solution Mn₃Cu_1?xA_xN (A = Co, Ni, Zn, Ga, Ge, Rh, Pd, Ag, In, Sn or Sb). This class of nitrides is attracting great attention because of their giant negative thermal expansion, which is achieved by doping Ge or Sn into the A site as a relaxant of the sharp volume contraction on heating (spontaneous volume magnetostriction ω_s) because of the magnetovolume effects. The physical background of large ω_s and mechanism of how the volume contraction becomes gradual with temperature are central concerns for the physics and applications of these nitrides. An entire dataset of thermal expansion, crystal structure and magnetization demonstrates that the cubic triangular antiferromagnetic state is crucial for large ω_s. The intimate relationship between ω_s and the magnetic structure is discussed in terms of geometrical frustration related to the Mn₆N octahedron and magnetic stress concept. The results presented herein also show that ω_s depends on the number of d electrons in the A atom, suggesting the important role of the d orbitals of the A atom. Not all the dopants in the A site, but the elements that disturb the cubic triangular antiferromagnetic state, are effective in broadening the volume change. This fact suggests that instability neighboring the phase boundary is related to the broadening. The relation between the gradual volume change and the local structure anomaly is suggested by recent microprobe studies.     

Sweep‐out flow of film condensation on vertical plates with horizontal grooves

We have investigated fluid flow characteristics of film‐wise condensation on vertical plates with horizontal periodic grooves. Condensate stays at the edge of the grooves due to the surface tension. The condensate starts to flow, however, when the balance between the surface tension and the condensate's own weight is broken. It is found that the condensate flows downward successively and periodically from the top part of the plate as a group. In addition, we have obtained the relation between the frequencies of the periodic flow and the degree of sub‐cooling for two different pitches of the grooves. © 2009 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20249     

First-principles investigation on the segregation of Pd at LaFe1-xPdxO3-y surfaces

First-principles calculations were performed to investigate the effect of Pd concentration and oxygen vacancies on the stability of Pd at LaFeO₃ surfaces. We found a much stronger tendency of Pd to segregate by taking the aggregation of Pd at LaFe_1-xPd_xO_3-y surfaces into consideration, resulting in a pair of Pd-Pd around a vacancy. Moreover, we predicted that one oxygen-vacancy-containing FeO₂-terminated surfaces would be stable at high temperatures by comparing the stability of LaFe_1-xPd_xO_3-y surfaces, which further supports our previous conclusion that a Pd-containing perovskite catalyst should be calcined at 1,073 K or higher temperatures in air to enhance the segregation of Pd in the vicinity of surfaces to rapidly transform the Pd catalyst from oxidized to reduced states on the perovskite support.