LaCr0.7Fe0.3O3-NiMn2O4 supported NTC composite ceramics with a sandwich-like structure

A novel sandwich-like structure was first proposed to adjust the electrical properties of NTC thermistors. The LaCr_0.7Fe_0.3O₃-NiMn₂O₄ supported composite ceramics with sandwich-like structure were initially fabricated via traditional solid-state reaction and uniaxial pressing methods, which allowed for the advantages of each component to be integrated into one material. X-Ray diffraction analysis indicates the ceramics mainly consisting of orthorhombic perovskite LaCr_0.7Fe_0.3O₃ and cubic spinel NiMn₂O₄ phases. SEM images manifest that the three layers adhered well to each other and exhibited high density. For electrical properties, the ρ_25°C was expanded to a wide range of 1182–110,233 Ω?cm and could be adjusted to the desired values by tuning the volume ratio of two basic layers, the B value was enhanced from 3358 K to 4167 K by NiMn₂O₄, and the thermal stability was improved by LaCr_0.7Fe_0.3O₃ with a resistance shift less than 0.55 % after annealing at 150 °C for 1500 h.     

Investigation on the anti-reduction mechanism of Ti4+ in high dielectric constant system Ca0.9La0.067TiO3 by doping with Al2O3

Ca_0.9La_0.067TiO₃ (abbreviated as CLT) ceramics doped with different amount of Al₂O₃ were prepared via the solid state reaction method. The anti-reduction mechanism of Ti⁴⁺ in CLT ceramics was carefully investigated. X-ray diffraction (XRD) was used to analyze the phase composition and lattice structure. Meanwhile, the Rietveld method was taken to calculate the lattice parameters. X-ray photoelectron spectroscopy (XPS) was employed to study the valence variation of Ti ions in CLT ceramics without and with Al₂O₃. The results showed that Al³⁺ substituted for Ti⁴⁺ to form solid solution and the solid solubility limit of Al³⁺ is near 1.11 mol%. Furthermore, the reduction of Ti⁴⁺ in CLT ceramics was restrained by acceptor doping process and the Q × f values of CLT ceramics were improved significantly. The CLT ceramic doped with 1.11 mol% Al₂O₃ exhibited good microwave dielectric properties: ε_r = 141, Q × f = 6848 GHz, τ_f = 576 ppm/°C.     

Smartphone-based bulky waste classification using convolutional neural networks

Multimedia Tools and Applications - The rapid urbanization process is escalating the urban waste problem, and ineffective management has worsened the issue, leading to severe consequences to the...     

Determination of Metastable Zone Width and Nucleation Induction Period of Palm Oil and its Olein/Stearin in Melting Layer Crystallization

Measurement methods of metastable zone width (MZW) and nucleation induction time for melting layer crystallization of palm oil (PO) and its olein/stearin (POL/PST) were established, and the effects of cooling rate (corresponding to various supercoolings) on MZWs and induction time for melting layer crystallization of PO, POL, and PST were determined. The results indicated that the MZW coherently rose with increasing cooling rates with respect to PO and POL, while it declined with higher cooling rates for PST. The induction period results demonstrated that the nucleation induction periods of PO, PST, and POL decreased with increasing supercoolings, and the lag time for nucleation negatively correlated to the melting point of oils at the same supercooling. These data could offer significant instruction in designing and controlling the melting layer crystallization process for palm oil.     

Photocatalytic degradation and heat reflectance recovery of waterborne acrylic polymer/ZnO nanocomposite coating

This work aims to clarify the photocatalytic degradation mechanism and heat reflectance recovery performance of waterborne acrylic polymer/ZnO nanocomposite coating. To fabricate the nanocomposite coating, ZnO nanoparticles (nano-ZnO) were dispersed into acrylic polymer matrix at the various concentrations from 1 to 6% (by total weight of resin solids). The photocatalytic degradation of nanocomposite coating under ultraviolet (UV) light irradiation has been investigated by monitoring its weight loss and chemical/microstructural/morphological changes. As the topcoat layer, its heat reflectance recovery has been evaluated under UV/condensation exposure by using an artificial dirty mixture of 85 wt% nanoclay, 10 wt% silica particles (1–5 μm), 1 wt% carbon black, and 2 wt% engine oil. After 108-cycle UV/condensation exposure, infrared spectra and weight loss analysis indicated that the maximal degradation for nanocomposite coating is observed at 1 wt% nano-ZnO. On the other hand, after 96 hr of UV light exposure, the nanocomposite coating with1 wt% nano-ZnO could restore effectively the reflective index of solar-heat reflectance coating (from 58.45 to 80.78%). Finally, the photodegradation mechanism of this waterborne acrylic polymer coating has been proposed as the UV-induced formation of CC CO conjugated double bonds. As a result, its self-cleaning phenomenon can be achieved as the recovery of heat reflectance.     

A preliminary study on the preparation of nanostructured Ti-doped Li4SiO4 pebbles by two-step sintering process

Li₄SiO₄ has been widely studied as attractive tritium breeding materials due to its innate merits. Considering the potential advantages of nanostructure in tritium breeding materials, a distinctive process was developed to obtain nanostructured Li₄SiO₄ pebbles. In brief, ultrafine precursor powders were synthesized by solvothermal method without using surfactants, and then indirect wet method was adopted to generate the green spheres with homogeneous microstructure. After that, the suitable sintering conditions were defined by studying the effects of sintering parameters on the grain size evolution, and nanostructured Ti-doped Li₄SiO₄ pebbles were first obtained by two-step sintering method. This study will be expected to provide references for fabricating other Li-based tritium breeding materials.     

Dynamic Passivation in Perovskite Quantum Dots for Specific Ammonia Detection at Room Temperature

Perovskite structured CsPbX₃ (X = Cl, Br, or I) quantum dots (QDs) have attracted considerable interest in the past few years due to their excellent optoelectronic properties. Surface passivation is one of the main pathways to optimize the optoelectrical performance of perovskite QDs, in which the amino group plays an important role for the corresponding interaction between lead and halide. In this work, it is found that ammonia gas could dramatically increase photoluminescence of purified QDs and effectively passivate surface defects of perovskite QDs introduced during purification, which is a reversible process. This phenomenon makes perovskite QDs a kind of ideal candidate for detection of ammonia gas at room temperature. This QD film sensor displays specific recognition behavior toward ammonia gas due to its significant fluorescence enhancement, while depressed luminescence in case of other gases. The sensor, in turn‐on mode, shows a wide detection range from 25 to 350 ppm with a limit of detection as low as 8.85 ppm. Meanwhile, a fast response time of ≈10 s is achieved, and the recovery time is ≈30 s. The fully reversible, high sensitivity and selectivity characteristics make CsPbBr₃ QDs ideal active materials for room‐temperature ammonia sensing.     

Biomimetic Engineering of a Scavenger‐Free Nitric Oxide‐Generating/Delivering System to Enhance Radiation Therapy

Nitric oxide (NO) is a potent tumor‐cell radiosensitizer but it can be readily scavenged by hemoglobin (Hb) in vivo. A biomimetic incubator that can generate and deliver NO in a scavenger (Hb)‐free environment to enhance its radiosensitizing effect to maximize its efficacy in radiotherapy is proposed. This NO incubator comprises a poly(lactic‐co‐glycolic acid) (PLGA) hollow microsphere (HM) that contains an NO donor (NONOate) and a surfactant molecule (sodium caprate, SC) in its aqueous core. In acidic tumorous environments, the PLGA shell of the HM allows the penetration of protons from the outside, activating the hydrolytic cleavage of NONOate, spontaneously generating NO bubbles, which are immediately trapped/stabilized by SC. The SC‐stabilized NO bubbles in the HM are then squeezed through the spaces of its PLGA matrices by the elevated internal pressure. Upon leaving the HM, the entrapped NO molecules may passively diffuse through their SC‐stabilized/protected layer gradually to the tumor site, having a long‐lasting radiosensitizing effect and inhibiting tumor growth. The entire process of NO generation and delivery is conducted in a scavenger (Hb)‐free environment, mimicking the development of young ovoviviparous fish inside their mothers' bodies in the absence of predators before birth.