Influence of pressure and dwell time on pressure-assisted sintering of calcium cobaltite

Calcium cobaltite Ca₃Co₄O₉, abbreviated Co349, is a promising thermoelectric material for high-temperature applications in air. Its anisotropic properties can be assigned to polycrystalline parts by texturing. Tape casting and pressure-assisted sintering (PAS) are a possible future way for a cost-effective mass-production of thermoelectric generators. This study examines the influence of pressure and dwell time during PAS at 900°C of tape-cast Co349 on texture and thermoelectric properties. Tape casting aligns lentoid Co349. PAS results in a textured Co349 microstructure with the thermoelectrically favorable ab-direction perpendicular to the pressing direction. By pressure variation during sintering, the microstructure of Co349 can be tailored either toward a maximum figure of merit as required for energy harvesting or toward a maximum power factor as required for energy harvesting. Moderate pressure of 2.5 MPa results in 25% porosity and a textured microstructure with a figure of merit of 0.13 at 700°C, two times higher than the dry-pressed, pressureless-sintered reference. A pressure of 7.5 MPa leads to 94% density and a high power factor of 326 µW/mK² at 800°C, which is 11 times higher than the dry-pressed reference (30 MPa) from the same powder.     

Spirobifluorene Dimers: Understanding How The Molecular Assemblies Drive The Electronic Properties

Spirobifluorene (SBF) is one of the most important scaffolds used in the design of organic semi-conductors (OSCs) for electronics. In recent years, among all the structures developed for these applications, SBF dimers have been highlighted due to their great potential in thermally activated delayed fluorescence and in phosphorescent organic light-emitting diodes. Attaching two SBF units generate 10 dimers, each possessing its own structural specificity, which in turn drives its electronic properties. These ten SBF dimers are gathered herein. Understanding how the molecular assembly determines the electronic properties has been one of the pillars of organic electronics. This is the goal of this article. As positional isomerism is a key tool to design OSCs, defining the design guidelines for the SBF scaffold appears of interest for the future of this building block. Herein, the importance of the two main parameters involved in the electrochemical and photophysical properties, namely the nature of the phenyl linkages and the steric congestion between the two SBF units is discussed. The combination of these two parameters drives the electronic properties but their respective weight is different as a function of the regioisomer involved or of the property considered (frontier orbitals energy level, absorption, fluorescence, phosphorescence).     

Strategies To Design Selective Histone Deacetylase Inhibitors

This review classifies drug-design strategies successfully implemented in the development of histone deacetylase (HDAC) inhibitors, which have many applications including cancer treatment. Our focus is on especially demanded selective HDAC inhibitors and their structure-activity relationships in relation to corresponding protein structures. The main part of the paper is divided into six subsections each narrating how optimization of one of six structural features can influence inhibitor selectivity. It starts with the impact of the zinc binding group on selectivity, continues with the optimization of the linker placed in the substrate binding tunnel as well as the adjustment of the cap group interacting with the surface of the protein, and ends with the addition of groups targeting class-specific sub-pockets: the side-pocket-, lower-pocket- and foot-pocket-targeting groups. The review is rounded off with a conclusion and an outlook on the future of HDAC inhibitor design.     

Role of ABCA7 in Human Health and in Alzheimer’s Disease

Several studies, including genome wide association studies (GWAS), have strongly suggested a central role for the ATP-binding cassette transporter subfamily A member 7 (ABCA7) in Alzheimer’s disease (AD). This ABC transporter is now considered as an important genetic determinant for late onset Alzheimer disease (LOAD) by regulating several molecular processes such as cholesterol metabolism and amyloid processing and clearance. In this review we shed light on these new functions and their cross-talk, explaining its implication in brain functioning, and therefore in AD onset and development.     

Increasing the photocatalytic and fungicide activities of Ag3PO4 microcrystals under visible-light irradiation

The present study reports for the first time the performance of silver phosphate (Ag₃PO₄) microcrystals as photocatalyst (degradation of Rodamine B-RhB) and antifungal agent (against Candida albicans–C. albicans) under visible-light irradiation (455 nm). Ag₃PO₄ microcrystals were synthesized by a simple co-precipitation (CP) method at room temperature. The structural and electronic properties of the as-synthetized Ag₃PO₄ have been investigated before and after 4 cycles of RhB degradation under visible light using X-ray diffraction (XRD), micro-Raman spectroscopy, UV–Vis spectrophotometer and field emission scanning electron microscopy (FE-SEM) images. The antifungal activity was analyzed in planktonic cells and 48h-biofilm of C. albicans by colony forming units (CFU) counting, confocal laser and FE-SE microscopies. Statistical analysis was carried out using SPSS software. Morphological and structural modifications of Ag₃PO₄ were observed upon recycling. After 4 recycles, the material maintained its photodegradation property; an eightfold increase in the efficiency of Ag₃PO₄ was observed in planktonic cells and a two fold increase in biofilm when irradiated under visible light. Thus, higher antifungal effectiveness against C. albicans was obtained when associated with visible-light irradiation.     

Measurements and modeling of absorptive partitioning of volatile organic compounds to painted surfaces

Partitioning to surfaces is an important sink for volatile organic compounds (VOCs) indoors, but the mechanisms are not well understood or quantified. Here, a mass spectrometer was coupled to a portable surface reactor and a flow tube to measure partitioning of VOCs into paint films coated onto glass or wallboard, and their subsequent diffusion. A model was developed to extract values of the effective absorbing organic mass concentration of the film, C_w, which is a measure of absorption capacity, and VOC diffusion coefficients, D_f, from VOC time profiles measured during film passivation and depassivation. Values of C_w agreed well with the value estimated from the paint film mass and flow tube air volume, and D_f values (also measured using attenuated total reflectance-Fourier transform infrared spectroscopy) correlated well with VOC vapor saturation concentrations, C*, estimated using a group contribution method. The value of these relationships for estimating key parameters that control VOC partitioning into paint and the fate of VOCs indoors was demonstrated using a house model, which indicated that >50% of VOCs with C* ≤10⁸ μg/m³ (C* of octane, hexanone, and propanol) that contacted a paint film of typical thickness fully permeated the film regardless of emission duration.     

风情西班牙 马德里AXEL酒店

正Axel酒店坐落于马德里文学街区中心的一栋19世纪的大楼内,在西班牙"黄金世纪"时期,这一地区曾是一个重要的文化中心。经过岁月的洗礼,大楼至今仍保留着橙色的外墙和典雅的阳台。接手此次酒店设计的是西班牙室内设计工作室EL EQUIPO CREATIVO,设计师以西班牙著名导演佩德罗·阿莫多瓦(Pedro Almodóvar)的电影为灵感,在酒店内融入了马德里非常传统并广受欢迎的特色元素和一些著名的视觉元素。     

Drag Reduction by Wormlike Micelles of a Biodegradable and Non-Biodegradable Surfactants

This study describes the effects of wormlike micelles formed by the commercial surfactants tallowalkylamidopropyl dimethylamine oxide (Aromox APA-TW) and oleyl methyl bis(2-hydroxyethyl) ammonium chloride (Ethoquad O/12) as drag reducers. Ethoquad O/12 is immune to degradation by heat and microorganisms. Conversely, Aromox APA-TW is biodegradable in the environment, and its susceptibility to heat-induced degradation was previously assessed. This work considers the effects of temperature, salt, and time on the drag-reduction capacity (in different Reynolds number) of wormlike micelles of these two surfactants. Wormlike micelles formed by Aromox APA-TW are able to reduce drag at higher temperatures compared to wormlike micelles formed by Ethoquad O/12. However, Aromox APA-TW can degrade after being heated to 80 °C and also after storage of the wormlike micelle solutions. Ethoquad O/12 does not undergo degradation after being heated or stored. These surfactants have the potential to be used as additives in industrial operations, as the wormlike micelles formed are able to reduce drag in systems with long pumping distances or recirculation, even in solutions with high salt concentrations (brine) and high temperatures.     

Microscopic investigation of the formation of a thermoset wheat gluten network in a model system relevant for bread making

Although the impact of heat on molecular properties of wheat gluten is well understood, changes in its microstructure have rarely been studied. Here, formation of the thermoset gluten network in a model system relevant for bread baking was studied with confocal laser scanning microscopy and protein network analysis. From 65 °C onwards, gluten converts from thick aligned protein strands in a highly branched and homogeneous network of small thin protein threads. Neither gliadin incorporation in the network nor application of aqualysin 1, the thermo-active serine peptidase from Thermus aquaticus which recently has been reported to hydrolyse gluten proteins in dough only at temperatures exceeding 80 °C, impacts on the gluten microstructure. As starch causes structure setting itself and thereby decreases protein mobility, molecular scale changes in the gluten network at temperatures exceeding 80 °C brought about by aqualysin 1 do not impact its microstructure.