A new write/erase method to improve the read disturbcharacteristics based on the decay phenomena of stress leakage currentfor flash memories

This paper describes a new write/erase method for flash memory to improve the read disturb characteristics by means of drastically reducing the stress leakage current in the tunnel oxide. This new write/erase operation method is based on the newly discovered three decay characteristics of the stress leakage current. The features of the proposed write/erase method are as follows: 1) the polarity of the additional pulse after applying write/erase pulse is the same as that of the control gate voltage in the read operation; 2) the voltage of the additional pulse is higher than that of a control gate in a read operation, and lower than that of a control gate in a write operation; and 3) an additional pulse is applied to the control gate just after a completion of the write/erase operation. With the proposed write/erase method, the degradation of the read disturb life time after 10⁶ write/erase cycles can be drastically reduced by 50% in comparison with the conventional bipolarity write/erase method used for NAND type flash memory. Furthermore, the degradation can he drastically reduced by 90% in comparison with the conventional unipolarity write/erase method fur NOR-, AND-, and DINOR-type flash memory. This proposed write/erase operation method has superior potential for applications to 256 Mb flash memories and beyond     

Development of flexible organic light‐emitting diode on barrier film and roll‐to‐roll manufacturing

To come out with a successful organic light‐emitting diode (OLED) lighting business, it is very important to have clear differentiation of OLED from LEDs. Flexible OLED has merits, such as capability to be mounted on the curved wall, which is not easy for LEDs to achieve the feature. There are several approaches to make flexible OLEDs especially among those plastic barrier films that can bring high level of flexibility, which could not be achieved by any conventional lighting method. In this paper, barrier films with various water vapor transmission rate values, including 10^{? 6} order, are applied, and the conditions to have almost no dark spot growth under 85 °C and 85% high temperature/humidity test are shown. Flexible OLED panels are manufactured with the world's first roll‐to‐roll equipment using plastic barrier film.     

Some characteristics of a sparged agitated vessel under foaming — Mechanical control of foaming —

Foam-breaking with a rotating disk mechanical foam-breaker (MFRD) was studied for a foaming system containing a diluted detergent solution in a laboratory sparged agitated vessel. The change of the foam-breaking capacity of the MFRD by varying the air sparge rate, the working volume and the impeller speed or the disk diameter was measured. Based on these measurements, empirical equations are presented for predicting the critical foam-breaking regions of the MFRD fitted with the agitated vessel. The operational range where foam-breaking with the MFRD can be carried out effectively and economically is also discussed.     

Satellite data visualization system for education

It is important for environment protection to monitor changes in the environment by natural and human causes. It is also important to educate the next generation on the importance of the global environment issues. Recently, it has become possible to continually monitor the global environment using various satellite sensor data. But these satellite data are used for highly specialized analysis by experts in such fields, and the data cannot easily be used by non-experts. In this paper, we propose a satellite data visualization system for educational use. In the proposed system, a gray-scale 2-dimensional image is created from the satellite data. Next, a pseudo-color image is created from the gray-scale image to assist the comprehension of the data. A 3-dimensional data representation of the image is also created, to assist the comparison of the individual data. The aim of the created image is for educational use, and the image is created with emphasis on comprehension of the data, rather than presentation of data details. The aim of the proposed system is presenting the satellite data visually so that non-experts can easily understand. The target of this research is to apply the proposed system for natural science education and to improve the awareness of global environmental issues.     

New bleeding model of additives in a polypropylene film under atmospheric pressure II

Many additives are commercially used to add more favorable qualities to films. The bleeding process by which the additive in a film comes to the surface is considered. A new bleeding model of additives in a polypropylene film under atmospheric pressure was investigated. Solubility and diffusion are found to be important for explaining this bleeding process. It was found that the experimental results were explained more precisely by assuming a two‐step transport process between the crystalline regions and the amorphous ones. The solubilities and diffusion coefficients of UV‐stabilizers such as 2‐(2H‐benzotriazol‐2‐yl)‐4‐(1,1,3,3‐tetramethylbutyl)phenol and 2‐(2H‐benzotriazol‐2‐yl)‐4‐methylphenol were determined at 40°C. The difference between the saturation solubilities and the diffusion coefficients of UV‐stabilizers was discussed by comparing with the results of molecular dynamics (MD) simulation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

In situ hybridization studies of matrix metalloproteinase-3, tissue inhibitor of metalloproteinase-1 and type IV collagen in diabetic nephropathy

The effects of UV radiation on humans and animals are receiving increasing attention and much interest has recently been focused on the environmental effects of UV A and UV B. This study compares the in vitro effects of UV A and UV B on the clonogenic survival of two human skin keratinocyte cell lines, HaCaT which are immortal but not tumorigenic and HPV-G transfected keratinocytes which form non malignant tumours in nude mice. The effects were also studied on an EPC fish cell line. The aim of the work was to establish if similar initial and delayed survival responses occurred in both species. The cells were exposed to ultraviolet lamps emitting maximally at 365 nm (UV A) and 302 nm (UV B). Clonogenic survival was determined at appropriate times post exposure. Results for the initial survival curves show that the HaCaT and HPV-G cells did not show any appreciable difference in their response to UV A but the EPC cells were more sensitive at doses < 3000 Jm-2. The EPC cells were more sensitive to UV B at doses < 200 Jm-2 in comparison to the human HaCaT and HPV-G cells with the HPV-G cells showing the most sensitivity to UV B at doses > 200 Jm-2. The possible contribution of lethal mutations (delayed cell death) to the UV radiation response in the HaCaT and EPC cell lines was examined. The results showed that lethal mutations were expressed in the HaCaT cells following exposure to UV A and UV B but no lethal mutations were expressed in the EPC cells.     

Preparation and characterization of stable dispersions of carbon black and nanodiamond in culture medium for in vitro toxicity assessment

Stable dispersions of carbon black and nanodiamond in culture medium were prepared by adding a pre-mixed dispersion of commercial carbon black or nanodiamond in aqueous bovine serum albumin (BSA) solution to culture medium. Dynamic light scattering revealed that carbon black and nanodiamond dispersions prepared in both NaCl solution and culture medium were highly stable. From DLVO theory and the results of zeta potential measurements, the theoretical effect of the electrostatic interactions between adsorbed BSA molecules was found to be minimal. The asymmetric flow field-flow fractionation measurements revealed that 0.05 or 0.56 mg/mL of BSA molecules were adsorbed on 0.11 or 1.09 mg/mL of carbon black, respectively, indicating 1:2 complexation of BSA with the colloidal particles. In the case of nanodiamond, 0.06 or 0.60 mg/mL of BSA molecules were adsorbed on 0.10 or 1.05 mg/mL of nanodiamond, respectively, indicating 1:2 complexation of BSA, which is the same ratio as in the case of carbon black. The adsorbed BSA molecules served as an effective stabilizing agent for the carbon black and nanodiamond, ensuring dispersion stability for at least 1 week. The preparation of the dispersions can be easily carried out by other researchers for toxicity studies.