排序方式: 共有31条查询结果,搜索用时 20 毫秒
1.
NDQ催化剂在单环管聚丙烯工业装置上的应用 总被引:1,自引:0,他引:1
使用NDQ催化剂在单环管聚丙烯(PP)工业装置上试生产T30S树脂,考察了NDQ催化剂对装置的适应性;与DQ催化剂进行对比,分析了2种催化剂生产PP的性能.结果表明:NDQ催化剂适用于单环管聚合装置;与目前装置使用的DQ催化剂相比活性有明显提高,催化剂和聚合物粒子破碎现象比DQ催化剂有所减少;NDQ催化剂生产的T30S树脂具有二甲苯可溶物含量低(至1.9%),相对分子质量分布宽(达5.9),拉伸屈服应力高(达35.8 MPa),弯曲强度高(达39.8 MPa)等特点. 相似文献
2.
采用差示扫描量热法(DSC)研究了EtOH/MgCl2的摩尔比在1.5~2.8的氯化镁乙醇醇合物的结构。研究表明,该区间的氯化镁乙醇醇合物存在两种稳定的组分,经推断这两种组分分别是MgCl2?2.8EtOH和MgCl2?1.5EtOH,它们的熔融峰值分别在115℃和155℃附近,该区间的氯化镁醇合物是由这两种稳定的组分组成的混合物。另外,氯化镁醇合物的熔点对水分很敏感,微量的水分会使醇合物的熔点降低。热分析结果显示,在MgCl2?2.8EtOH醇合物中存在微量的水分时会在100℃形成特征峰。对具有微量水分且EtOH/MgCl2的摩尔比在1.55~2.64的氯化镁醇合物进行减压脱醇时,首先减少的是MgCl2?2.8EtOH组分,其次是MgCl2?2.8EtOH与微量水分形成的组分,并且没有水分被脱除掉。 相似文献
3.
茂金属催化剂和Z—N催化剂结合在一起制成的新型复合催化剂具有双活性中心,用于乙烯聚合可得到双峰分子量分布的聚乙烯,并且聚乙烯具有优良的综合物理性能和加工性能。新型复合催化剂以氯化镁为载体,以茂金属化合物和四氯化钛为双活性中心,解决了茂金属载体化后聚合活性大幅度下降的难题,相对地减少了助催化剂甲基铝氧烷的用量,克服了由茂金属催化剂制备的聚合物分子量分布窄、加工困难的弱点,为茂金属催化剂的开发应用开辟了新途径。 相似文献
4.
5.
A novel MgCl2-supported Ziegler-Natta catalyst containing diethyl diisopropylsuccinate donor was prepared and propylene polymerizations with the combination of such catalyst and four external donors were investigated in detail. The catalyst was compared with a commercial one with phthalate as internal donor in terms of catalytic activity, hydrogen sensitivity and stereospecificity in propylene polymerization. The molecular weight, molecular weight distribution and microstructure of the produced polypropylenes were compared also. It was found that the novel catalyst containing succinate internal donor showed higher activity and higher stereospecificity than those with phthalate as internal donor. Consequently, polypropylenes obtained by the succinate-based catalyst showed high molecular weight, high melting temperature, high isotactic index and broad molecular weight distribution than those obtained with the commercial catalyst. 相似文献
6.
8.
以环己基甲基二甲氧基硅烷为外给电子体,使用NDQ型催化剂在100 kt/a的单环管聚丙烯(PP)生产装置上试生产不同等规指数的双向拉伸聚丙烯(BOPP)薄膜专用PP,并与DQ型催化剂进行对比试验。分析测试了PP的相对分子质量及其分布和力学性能,并试生产了BOPP薄膜。结果表明:与DQ型催化剂相比,用NDQ型催化剂在单环管装置上生产的BOPP薄膜专用PP的相对分子质量分布较宽,达7.5~7.7,二甲苯可溶物含量较低,拉伸强度和弯曲应力较高,且满足BOPP薄膜的生产要求。 相似文献
9.
10.