Visualizing for the Non‐Visual: Enabling the Visually Impaired to Use Visualization

The majority of visualizations on the web are still stored as raster images, making them inaccessible to visually impaired users. We propose a deep‐neural‐network‐based approach that automatically recognizes key elements in a visualization, including a visualization type, graphical elements, labels, legends, and most importantly, the original data conveyed in the visualization. We leverage such extracted information to provide visually impaired people with the reading of the extracted information. Based on interviews with visually impaired users, we built a Google Chrome extension designed to work with screen reader software to automatically decode charts on a webpage using our pipeline. We compared the performance of the back‐end algorithm with existing methods and evaluated the utility using qualitative feedback from visually impaired users.     

Selective hydrogenation of oleic acid to 9-octadecen-1-ol: Catalyst preparation and optimum reaction conditions

A new catalyst, ruthenium-tin-alumina is found to selectively hydrogenate oleic acid to 9-octadecen-1-ol (oleyl + elaidyl alcohol) at low pressure with high yield. Catalyst preparation methods, catalyst raw materials and activation conditions have a significant effect on the activity of the catalyst. The optimum atomic ratio of ruthenium to tin is about 1:2. Catalyst prepared by an improved sol-gel method shows higher activity and selectivity than catalysts prepared by impregnation and coprecipitation methods. Chloride is found to have a negative effect on catalytic activity. The best catalyst is prepared from chloride-free ruthenium and tin raw materials. Under the optimum reaction conditions of 250°C and 5.6 MPa, the selectivities for 9-octadecen-1-ol and total alcohol (9-octadecen-1-ol + stearyl alcohol) formation are 80.9% and 97%, respectively, at a conversion of 81.3%.     

智能型激光控制器提高灵活性并节省空间

激光二极管是宽带调幅光纤发射系统的核心器件。光纤系统依赖于激光的稳定性,但未受调节控制的激光二极管特性却常因制造误差、温度和使用日久所造成的参数改变而变得不稳定。因此,光纤通信系统需要专用电路来控制重要的激光二极管参数,以确保它们稳定操作。虽然激光控制电路都     

A study on the dynamic characteristics of the Korean Yi-dynasty bell type structure

The dynamic characteristics of the Korean Yi-dynasty bell type structure, including the acoustic effects, are analyzed both theoretically and experimentally. The numerical solutions of natural frequencies and mode shape for membrane and flexural behavior are obtained by using the NASTRAN program for the finite element method with plate shell elements of triangular and quadrilateral types. Test bells, A and B types similar to the Kap-Sa bell in Kong-Ju chosen among typical Korean Yi-dynasty bells, are manufactured on different scales to the original bell. To consider the effects of the variation of the structural dimension on the dynamic response, these bells are analyzed with respect to the variation of the thickness of the wall and the bottom rim and the asymmetric Dang-Jwas. The impact method with the Fast Fourier Transform Analyzer is adopted to experimentally assess the dynamic response. Results are in good agreement with the numerical solutions.     

Effects of Purified Persimmon Tannin and Tannic Acid on Survival and Reproduction of Bean Bug, Riptortus clavatus

We evaluated the effects of tannic acid and purified perrsimmon tannin on survival and reproduction of bean bugs, Riptortus clavatus.Feeding behavior of R. clavatus was also examined on sweet (cv. Fuyu) and astringent (cv. Chongdosi) persimmon fruits. Soluble tannin in sweet persimmon fruits decreased from 3% in early June to 0.5% in late September, but it increased from 2 to 8% during the same period in astringent persimmon fruits. More bugs visited sweet than astringent persimmon. Numbers of piercing/sucking spots were higher on sweet than on astringent persimmon. When fed 1 and 3% solutions of persimmon tannin, adult bugs ingested only 64.1 and 9.5% of the amount of water ingested by those offered the control (distilled water). Amounts of persimmon tannin ingested by the adult bugs were 6.5 and 2.8 times higher at 1 and 3% tannin solutions compared to a 0.1% solution. Persimmon tannin exerted negative effects on survival and reproduction of R. clavatus at higher concentrations (1 and 3% solutions). Feeding of R. clavatus adults decreased with increasing tannin concentrations. When results from both sexes were pooled, 50% mortality was achieved at 11 and 4 days after treatment with the 1 and 3% tannin solutions, respectively. Reproduction decreased with 1% tannin, and no eggs were produced with 3% tannin solution. Tannic acid was similar in its effects on R. clavatus. All nymphs died 14, 12, and 7 days after feeding on 0.1, 1, and 3% tannic acid, respectively. Adults were less sensitive than nymphs, and their survival was not affected by 0.1% tannic acid. However. 1 and 3% tannic acid solutions were fatal. Survivorship decreased to 50% at 11 and 6 days after supplying tannin solutions of 1 and 3% concentrations. Higher concentrations (1 and 3%) resulted in reduced reproduction, as was seen with persimmon tannin. Our data may explain why R. clavatus does not invade sweet persimmon orchards until late July, when concentrations of soluble tannin are low enough to allow them to feed.     

Selective Oxidation of Methanol to Formaldehyde Using Modified Iron-Molybdate Catalysts

Methanol selective oxidation to formaldehyde over a modified Fe-Mo catalyst with two different stoichiometric (Mo/Fe atomic ratio = 1.5 and 3.0) was studied experimentally in a fixed bed reactor over a wide range of reaction conditions. The physicochemical characterization of the prepared catalysts provides evidence that Fe₂(MoO₄)₃ is in fact the active phase of the catalyst. The experimental results of conversion of methanol and selectivity towards formaldehyde for various residence times were studied. The results showed that as the residence time increases the yield of formaldehyde decreases. Selectivity of formaldehyde decreases with increase in residence time. This result is attributable to subsequent oxidation of formaldehyde to carbon monoxide due to longer residence time.     

Crystalline morphology and isothermal crystallization kinetics of poly(ethylene terephthalate)/clay nanocomposites

A poly(ethylene terephthalate) (PET)/montmorillonite clay nanocomposite was synthesized via in situ polymerization. Microscopic studies revealed that in an isothermal crystallization process, some crystallites in the nanocomposite initially were rod‐shaped and later exhibited three‐dimensional growth. The crystallites in the nanocomposite were irregularly shaped, rather than spherulitic, being interlocked together without clear boundaries, and they were much smaller than those of neat PET. With Avrami analysis, the isothermal crystallization kinetic parameters (the Avrami exponent and constant) were obtained. The rate constants for the nanocomposite demonstrated that clay could greatly increase the crystallization rate of PET. The results for the Avrami exponent were consistent with the observation of the rodlike crystallites in the PET/clay nanocomposite during the initial stage. Wide‐angle X‐ray scattering and Fourier transform infrared studies showed that, in comparison with neat PET, the crystal lattice parameters and crystallinity of the nanocomposite did not change significantly, whereas more defects may have been present in the crystalline regions of the nanocomposite because of the presence of the clay. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1381–1388, 2004     

Effect of calcination temperature on the characteristics of SO<Emphasis Type="Italic">sk</Emphasis>4/2-/TiO<Subscript>2</Subscript> catalysts for the reduction of NO by NH<Subscript>3</Subscript>

The catalytic activity of sulfated titania (ST) calcined at a variety of temperatures has been investigated for selective catalytic reduction (SCR) of NO by NH₃. The NO removal activity of ST catalyst mainly depends on its sulfur content, indicating critical role of sulfur species on the surface of TiO₂. The role of sulfur is mainly the formation of acid sites on the catalyst surface. The presence of both BrØnsted and Lewis acid sites on the surface of sulfated titania has been identified by IR study with the adsorption of NH₃ and pyridine on ST. The reduction of the intensity of IR bands representing BrØsted acid sites is more pronounced than that revealing Lewis acid sites as the calcination temperature increases. It has been further clarified by IR study of ST500 catalyst evacuated at a variety of temperatures. The NO removal activity also decreases with the increase of the catalyst calcination temperature. It simply reveals that BrØnsted acid sites induced by sulfate on the catalyst surface are primarily responsible for the enhancement of catalytic activity of ST catalyst containing sulfur for NO reduction by NH₃.     

Tensile strength and morphological investigation of SiC-coated carbon fibers

SiC-coated film onto carbon fibers as a barrier of oxidation resistance and reaction between carbon fibers and metals was investigated. The chemical vapor deposition of silicon carbide onto carbon fibers was performed at various temperatures ranging from 700 to 1000°C using triisopropylsilane vapor carried by hydrogen gas. The strength of the SiC-coated carbon fibers was decreased due to deterioration of fibers and chemical attack of hydrogen on the surface of carbon fibers during the coating process. The oxidation and the thermal resistance of the SiC-coated carbon fibers compared to the uncoated carbon fibers were improved at temperature range of 600–800°C and 1000–1200°C, respectively. Morphological change by air oxidation at temperature range of 500–800‡C was also investigated for the SiC-coated and the uncoated carbon fibers, respectively. The SiC-coated film between carbon fiber and aluminum was sufficient as a barrier of reaction on carbon fiber reinforced aluminum at temperature of above 1000°C.