Influence of the silicon surface treatment by plasma etching and scratching on the nucleation of diamond grown in HFCVD - a comparative study

A comparative study for the nucleation of diamond was carried out using surface treatment like (i) surface scratching with 1 μm diamond paste and (ii) surface etching using chlorine plasma at different RF powers (50, 100 and 150 W). Atomic force microscopic study shows variation in roughness from 31 nm to 110 nm. Scratching results in random scratches, whereas plasma etches a surface uniformly. Scanning electron microscopic observations show well faceted crystallites with a predominance of angular shaped grains corresponding to 〈100〉 and 〈110〉 crystallite surfaces for the scratched as well as plasma etched substrate. Surface etching at 150 W plasma power results in a better growth in comparison with 50 and 100 W plasma powers. Chlorine-radical is found responsible for the changes in the growth morphology. Raman spectroscopy shows a sharp peak at 1,332 cm⁻¹ and a peak at ∼1,580 cm⁻¹ for both samples.     

Synthesis,characterization, and cell viability of bifunctional medical-grade polyurethane nanofiber: Functionalization by bone inducing and bacteria ablating materials

There is an extensive possibility of improving characteristics of fibers used in hard tissue engineering, being hydrophobic and less osteoconductive, resulting in the dynamic growth of new tissues. The current work focuses on the fabrication of nanofibers incorporated with titanium dioxide (TiO₂) ''as osteoconductive'' and silver (Ag) ''as self-healing'' nanoparticles (NPs). The incorporation of AgNO₃ by in situ method not only helped to impart the antibacterial activity but also changed the contact angle from 81 ± 03° in the case of pristine nanofibers to 74 ± 03°, 61 ± 03°, 50 ± 08°, and 39 ± 1.1°, in the composite scaffolds containing 0.01, 0.03, 0.05, and 0.07 M of Ag salts. The incubation in simulated body fluid at 37°C to induce mineralization on nanofiber scaffolds indicated Ca and P crystals' formation. The antibacterial activity showed significantly more toxicity toward E. coli (8.3 ± 0.9 mm) than S. aureus (1.2 ± 0.1 mm). Biocompatibility studies using MTT assay on the pre-osteoblasts showed that both TiO₂ and Ag NPs present in the nanofibers are non-toxic to the bone-like cells. However, results show that a higher concentration of Ag NPs (i.e., 0.07 M) is toxic to cells growing. Finally, all the results suggest that the nanofiber scaffolds have considerable scope for future bone tissue engineering materials.     

Effectiveness of pressurised carbon dioxide for inactivation of Escherichia coli isolated from sewage sludge

This research explored the possible application of pressurised carbon dioxide (P CO(2)), a promising non-thermal sterilisation technique, for the treatment of sewage sludge (SS) before anaerobic digestion to inactivate pathogenic microorganisms. Escherichia coli was selected as the test organism and was isolated from SS and maintained in pure culture. The growth curve of the isolated strain was determined by measuring the optical density (OD) in liquid culture medium and relating this information to the spread plate count so that a culture of known cell density could be grown for optimisation experiments. Inactivation of E. coli was enhanced by increase in pressure (1,500, 2,000 and 2,800 kPa) and treatment time (from 0.75 to 24 h). A short exposure time at high pressure was sufficient to provide a degree of inactivation which could also be achieved by longer exposure at lower pressure. Complete inactivation (8 log(10) reduction) was possible at all three pressures. scanning (SEM) and transmission (TEM) electron microscopy studies of E. coli treated with P CO(2) revealed that the cell walls were ruptured, and the cytoplasm was unevenly distributed and had lost its density, indicating the possible leakage of intracellular substances.     

Pollen morphological investigations of family Cactaceae and its taxonomic implication by light microscopy and scanning electron microscopy

The family Cactaceae is the diversified group of angiosperm plants whose pollen statistics has been used for taxonomic identification. In this article, we present the pollen morphology of eight species belong to seven taxonomically complex genera of Cactaceae including Astrophytum, Cylindropuntia, Echinocereus, Echinopsis, Mammillaria, Opuntia, and Thelocactus using light and scanning electron microscopy. The pollen grains were acetolyzed, measured, described, and electron photomicrographs were taken. Cactaceae can be characterized by presenting different palynomorphological features including pollen type, sculpturing, polar and equatorial diameter, aperture orientation, exine thickness, P/E ratio, and echini features. Four types of pollen shapes, that is, prolate spheroidal (three species), subprolate (two species), prolate (two species), and oblate spheroidal in Echinocereus reichenbachii were observed. The polar and equatorial diameter observed maximum in O. ficus indica 116.95 and 112.27 μm while minimum in M. compressa 38.42 and 21.05 μm. Pollen of two types, tricolpate in members of subfamily Cactioideae and pantoporate in the Opuntioideae were examined. The fertility percentage has been observed maximum in Opuntia macrocentra (83.84%) and minimum in Opuntia ficus‐indica (57.89%). Exine sculpturing showing great variations such as granulate, reticulate, granulate perforate and micro‐echinate foveolate ornamentation was examined only in Echinopsis eyriesii. A key to species, based on pollen micromorphological attributes, has been constructed for correct identification of complex cactus species.     

Palyno‐morphological characteristics of gymnosperm flora of pakistan and its taxonomic implications with LM and SEM methods

The present study is intended to assess gymnosperms pollen flora of Pakistan using Light Microscope (LM) and Scanning Electron Microscopy (SEM) for its taxonomic significance in identification of gymnosperms. Pollens of 35 gymnosperm species (12 genera and five families) were collected from its various distributional sites of gymnosperms in Pakistan. LM and SEM were used to investigate different palyno‐morphological characteristics. Five pollen types (i.e., Inaperturate, Monolete, Monoporate, Vesiculate‐bisaccate and Polyplicate) were observed. Six In equatorial view seven types of pollens were observed, in which ten species were sub‐angular, nine species were Traingular, six species were Perprolate, three species were Rhomboidal, three species were semi‐angular, two species were rectangular and two species were prolate. While five types of pollen were observed in polar view, in which ten species were Spheroidal, nine species were Angular, eight were Interlobate, six species were Circular, two species were Elliptic. Eighteen species has rugulate and 17 species has faveolate ornamentation. Eighteen species has verrucate and 17 have gemmate type sculpturing. The data was analysed through cluster analysis. The study showed that these palyno‐morphological features have significance value in classification and identification of gymnosperms. Based on these different palyno‐morphological features, a taxonomic key was proposed for the accurate and fast identifications of gymnosperms from Pakistan.     

平纹机织玄武岩纤维/环氧树脂复合材料冲击拉伸行为

以常规机织工艺生产织物增强体,以真空辅助树脂转移模塑法(VARTM)制备成型复合材料,研究单层平纹玄武岩长丝增强环氧树脂复合材料在准静态和高应变率加载下的拉伸性能。准静态和高应变率拉伸试验分别在MTS-810.23试验仪和分离式霍普金森拉杆(SHTB)测试系统上完成。试验结果表明该材料的力学性能具有应变率依赖性:随着应变速率的增加,拉伸模量和拉伸强度单调增加,失效应变单调减小,弹性能先增加后减小。材料的失效破坏特征也呈现明显的应变率效应:准静态拉伸时,材料断口整齐,树脂的破碎少,几乎没有纤维的抽拔和经纬向纤维束间的滑移;高应变率拉伸时,材料断口参差错乱,树脂完全破碎,纤维束抽拔严重、相互崩裂和滑移,织物增强体结构的整体性破坏严重。     

Structural and optical properties of nc-Si:H thin films deposited by layer-by-layer technique

Hydrogenated nanocrystalline silicon (nc-Si:H) thin films deposited on c-Si and quartz substrates by layer-by-layer (LBL) technique using radio-frequency plasma enhanced chemical vapour deposition system. The effects of rf power on the interlayer elemental profiling, structural and optical properties of the films were investigated by Auger electron spectroscopy, Fourier transform infrared spectroscopy, Raman scattering spectroscopy, X-ray diffraction and optical transmission and reflection spectroscopy. The results revealed that the LBL deposition leads to a formation of different ranges of crystallite sizes of nc-Si corresponds 3–6 and 8–26 nm respectively. LBL deposition also demonstrated a capability to increase the crystalline volume fraction of nc-Si up to 65.3 % with the crystallite size in between 5 and 6 nm, at the rf power in between 80 and 100 W. However, the crystalline volume fraction decreased for the rf power above 100 W due to the growth of nc-Si was suppressed by the formation of SiO₂. In addition, the onset of crystallization of the films deposited on c-Si and quartz substrates are different with increase in the rf power. The effects of rf power on the growth of nc-Si, and the hydrogen content, structural disorder, crystallite size of nc-Si and oxygen diffusion into the LBL layer with the change of optical energy gap under the variation of rf power are also discussed.