540kN力基准机砝码摆动的研究

日本国家计量研究院(National Research Laboratory of Metrology)540kN静重式力基准机中的振荡分量主要是由于砝码的摆动引起的。本文对砝码的动态特性做了详细的分析，给出了其摆动的轨迹图，并对由于砝码摆动引起的相对不确定度进行了评估。提出了一类采用传感器并联的叠加系统(以下称叠加系统)输出的力值信号来评估砝码动态特性的信号处理方法。它对研究静重式测力机砝码摆动提供了有效的分析方法。     

Network Design with Edge-Connectivity and Degree Constraints

We consider the following network design problem; Given a vertex set V with a metric cost c on V, an integer k≥1, and a degree specification b, find a minimum cost k-edge-connected multigraph on V under the constraint that the degree of each vertex v∈V is equal to b(v). This problem generalizes metric TSP. In this paper, we show that the problem admits a ρ-approximation algorithm if b(v)≥2, v∈V, where ρ=2.5 if k is even, and ρ=2.5+1.5/k if k is odd. We also prove that the digraph version of this problem admits a 2.5-approximation algorithm and discuss some generalization of metric TSP.     

Performance evaluation and effect of biogas circulation rate of a bubble column for biological desulfurization

Biological desulfurization using a bubble column reactor was investigated in a continuous biogas treatment. Rapid biogas circulation between the digester and the bubble column for biological desulfurization was used to stimulate the gas-liquid mass transfer of H(2)S. A positive correlation between the biogas circulation rate and H(2)S removal rate was observed. Moreover, the increase in the circulation rate stimulated the O(2) mass transfer, eventually translating into an increase in sulfate production from the oxidation of H(2)S. Throughout the continuous experiment, the reactor retained sufficient levels of sulfide-oxidizing bacteria. A comparison of the results of the continuous biogas treatment and batch tests suggests that the gas-liquid mass transfer rate of H(2)S was the rate-limiting step in the biological desulfurization in the reactor, indicating that the mass transfer efficiency of H(2)S needs to be improved to enhance the desulfurization performance.     

Spin Injection Processes in ZnSe-Based Double Quantum Dots of Diluted Magnetic Semiconductors

Spin injection processes in the double quantum dots of ZnSe-based diluted magnetic semiconductors are discussed. Double quantum dots are fabricated from ZnSe-based double quantum wells by electron beam lithography and wet etching. In these samples, the photo-excited carriers in the magnetic dots are injected into the non-magnetic dots. The circular polarization degrees of photoluminescence from the non-magnetic dots are measured by micro-photoluminescence measurement system under the magnetic field up to 5 T. The maximum spin polarization degrees of injected carriers determined from our experiment are 10% for double quantum wells and 15% for double quantum dots. The spin injection efficiency was estimated both from the observed circular polarization degree and the diffusion length of carriers. We concluded that the spin injection efficiency is increased in the double quantum dots.     

Strong Surface‐Termination Effect on Electroresistance in Ferroelectric Tunnel Junctions

Tunnel electroresistance in ferroelectric tunnel junctions (FTJs) has attracted considerable interest, because of a promising application to nonvolatile memories. Development of ferroelectric thin‐film devices requires atomic‐scale band‐structure engineering based on depolarization‐field effects at interfaces. By using FTJs consisting of ultrathin layers of the prototypical ferroelectric BaTiO₃, it is demonstrated that the surface termination of the ferroelectric in contact with a simple‐metal electrode critically affects properties of electroresistance. BaTiO₃ barrier‐layers with TiO₂ or BaO terminations show opposing relationships between the polarization direction and the resistance state. The resistance‐switching ratio in the junctions can be remarkably enhanced up to 10⁵% at room temperature, by artificially controlling the fraction of BaO termination. These results are explained in terms of the termination dependence of the depolarization field that is generated by a dead layer and imperfect charge screening. The findings on the mechanism of tunnel electroresistance should lead to performance improvements in the devices based on nanoscale ferroelectrics.     

Water Quality Improvement by Combined UF,RO, and Ozone/Hydrogen Peroxide System (HiPOx) in the Water Reclamation Process

Conventional water reclamation processes, such as membrane bioreactors, are not always effective in removal of pharmaceuticals and personal care products (PPCPs), endocrine disrupting chemicals (EDCs) and/or N-nitrosodimethylamine (NDMA), even with the reverse osmosis (RO) membrane process. A study was conducted, at a NEWater factory in Singapore, to compare a conventional ultrafiltration (UF) membrane /RO treatment process with a treatment train having the HiPOx unit, an advanced oxidation process (AOP), which was installed between the UF and the RO unit operations. By incorporating the HiPOx into the UF/RO treatment process, following results were observed; 1) increased removal of PPCPs, EDCs and NDMA, 2) improvement in ultraviolet transmission (UVT) of the RO permeate, 3) enhanced removal of TOC and color, and increased UVT of the RO brine, 4) suppression of the increase in the RO transmembrane pressure by organic fouling.     

Aroma Characteristic and Volatile Profiling of Carrot Varieties and Quantitative Role of Terpenoid Compounds for Carrot Sensory Attributes

The aroma characteristics and volatile profiles of 14 carrot varieties were investigated by sensory evaluations and gas chromatography–mass spectrometry volatile analyses. The sensory map obtained by principal components analysis showed that the sensory attributes comprised 3 categories: sour/green, overall carrot/harsh/ink‐like, and fruity/fresh/sweet. The Kuroda type is characterized by lower intensities of overall carrot/harsh/ink‐like and fruity/fresh/sweet notes. Furthermore, volatile profiling indicated that this type did not have significantly higher amounts of volatiles. Partial least squares regression analysis determined the quantitative contributions to ink‐like, harsh, and fruity carrot aromas; monoterpenes had significant positive correlations with these attributes, while bisabolene isomers had negative correlations. The aroma attribute intensity and contents of volatiles and nutritional compounds are relatively low in the Kuroda type than in other carrot types. This type may be useful for reducing carrot harshness during the development of new carrots with good eating qualities.     

Discrimination of psychoactive fungi (commonly called "magic mushrooms") based on the DNA sequence of the internal transcribed spacer region

'Magic mushrooms' (MMs) are psychoactive fungi containing the hallucinogenic compounds, psilocin (1) and psilocybin (2). Since June 6, 2002, these fungi have been regulated by the Narcotics and Psychotropics Control Law in Japan. Because there are many kinds of MMs and they are sold even as dry powders in local markets, it is very difficult to identify the original species of the MMs by morphological observation. Therefore, we investigated the internal transcribed spacer (ITS) region in the ribosomal RNA gene of MMs obtained in Japanese markets to classify them by a genetic approach. Based on the size and nucleotide sequence of the ITS region amplified by PCR, tested MMs were classified into 6 groups. Furthermore, a comparison of the DNA sequences of the MMs with those of authentic samples or with those found in the databases (GenBank, EMBL and DDBJ) made it possible to identify the species of tested MMs. Analysis by LC revealed that psilocin (1) was contained at the highest level in Panaeolus cyanescens among the MMs, but was absent in the Amanita species.     

Influence of the methyl group on the dielectric constant of boron carbon nitride films containing it

LSI interconnect insulators made using low dielectric constant (low-k) materials are required for high performance devices with a small RC delay. We investigated a boron carbon nitride film containing the methyl group (Me–BCN) using tris-di-methyl-amino-boron (TMAB: B[N(CH₃)₂]₃) gas as a low-k material. In addition, we studied the influence of the methyl group on the dielectric constant (k-value) and the properties of the Me–BCN films. It was found that the k-value of the Me–BCN films decreases with increasing number of C–H bonds due to the methyl group (CH₃). The number of O–H bonds due to water incorporation is suppressed by increasing the number of C–H bonds. Consequently, we suggested that a lower k-value can be realized by the suppression of water invasion by a hydrophobic surface due to methyl bonds. Thus, the control of the methyl group is important to achieve a low-k material using Me–BCN films.