金针菇多糖对微冻大黄鱼及其鱼片品质变化的影响

为研究金针菇多糖（polysaccharide from Flammulina velutipes，FVP）对微冻大黄鱼及鱼片在贮藏期间肌原纤维蛋白性质的变化及水分分布的影响，实验分别选用0.03、0.06、0.09 g/L FVP浸渍处理大黄鱼和鱼片，以无菌水处理为对照组，分析微冻贮藏期间样品的感官指标得分、总挥发性盐基氮含量、总巯基含量、Ca2＋-ATPase活性、蛋白流变学性质以及水分迁移变化规律。结果表明：FVP可有效抑制整鱼总挥发性盐基氮含量上升和感官得分的下降；减缓整鱼及鱼片在微冻过程中总巯基含量、Ca2＋-ATPase活性下降和水分流失；此外FVP还能够延缓大黄鱼因腐败而出现的蛋白凝胶能力减弱。在本实验选取的多糖浓度范围内，0.09 g/L FVP处理组保鲜效果较强。该研究结果可为FVP用于水产品贮运保鲜提供理论参考。     

Characterization of barium titanate reinforced acrylonitrile butadiene rubber composites for flexible electronic applications: influences of barium titanate content

The aim of this study was to develop high dielectric constant flexible polymers with a highly efficient and cost‐effective approach using acrylonitrile butadiene rubber (NBR) as the polymer matrix and barium titanate (BT) as the high dielectric constant filler. The BT powder was synthesized with a solid‐state reaction and was characterized using a particle size analyzer, XRD, SEM and Fourier transform infrared spectroscopy. NBR/BT composites were fabricated using an internal mixer with various BT loadings up to 160 phr. The influence of BT loading on the cure characteristics and mechanical, dynamic mechanical, thermal, dielectric and morphological properties was determined. The incorporation of BT in the NBR matrix shortened scorch time and increased delta torque. The mechanical properties, thermal stability and dielectric constant were greatly improved and increased with BT loading. The results suggest that the reinforcement effect was achieved due to strong hydrogen bonding or polar–polar interactions between NBR matrix and BT filler. This is further corroborated by the good dispersion of BT filler in the NBR matrix observed with SEM imaging. These findings can be applied to produce high‐performance dielectric elastomers. © 2020 Society of Industrial Chemistry     

Effect of Addition of Ni metal catalyst onto the Co and Fe supported catalysts for the formation of carbon nanotubes

Production of novel porous material is a major target in current material science research due to its wide applications. As carbon nanotube (CNTs) is a one dimensional hollow structure it is also one of the promising materials in applications ranging from electronics to hydrogen storage medium. Catalytic chemical vapor deposition (CCVD) is a method whereby CNTs can be produced in large amount. Thus, in this work, we have synthesized CNTs via pyrolysis of acetylene using various supported transition-metal catalysts in a fixed-bed reactor. Scanning electron microscope (SEM) and transmission electron microscope (TEM) were used to investigate the CNTs structure. The structures of nanotubes formed by acetylene pyrolysis were dependent on the catalysts used. It was found that alumina supported Ni/Fe catalyst inhibited the formation of CNTs growth while alumina supported Ni/Co catalyst gave high density of CNTs. However, nanotubes grown over alumina supported Ni/Fe catalyst were less dense due to the deactivation of the catalyst at the early stage of the pyrolysis process.     

Interpretation of way-finding healthcare symbols by a multicultural population: Navigation signage design for global health

The interpretation of way-finding symbols for healthcare facilities in a multicultural community was assessed in a cross-sectional study. One hundred participants recruited from Al Ain city in the United Arab Emirates were asked to interpret 28 healthcare symbols developed at Hablamos Juntos (such as vaccinations and laboratory) as well as 18 general-purpose symbols (such as elevators and restrooms). The mean age was 27.6 years (16–55 years) of whom 84 (84%) were females. Healthcare symbols were more difficult to comprehend than general-purpose signs. Symbols referring to abstract concepts were the most misinterpreted including oncology, diabetes education, outpatient clinic, interpretive services, pharmacy, internal medicine, registration, social services, obstetrics and gynecology, pediatrics and infectious diseases. Interpretation rates varied across cultural backgrounds and increased with higher education and younger age. Signage within healthcare facilities should be tested among older persons, those with limited literacy and across a wide range of cultures.     

Ti3AlC2 coated D-shaped fiber saturable absorber for Q-switched pulse generation

In this letter, a titanium aluminum carbide (Ti3AlC2) coated D-shaped fiber is proposed and demonstrated as a new saturable absorber (SA) for Q-switched laser pulse generation. In preparing the SA, the Ti3AlC2 powder is dispersed in liquid polyvinyl alcohol (PVA) before the solution is dropped and left to dry onto a polished surface of D-shape fiber. The SA is added to an erbium-doped fiber laser (EDFL) cavity to modulate the cavity loss for Q-switching. The Q-switched laser is obtained at 1 561 nm. The pulse width of the pulses can be varied between 7.4 µs and 5.1 µs with a corresponding repetition rate range from 41.26 kHz to 54.35 kHz, when the pump power is increased from 42.2 mW to 71.5 mW. At 71.5 mW pump, the pulse energy is obtained at 70.3 nJ. The signal-to-noise ratio (SNR) of the fundamental frequency is recorded at 67 dB, which indicates the stability of the laser.     

Behaviour of sand–clay mixtures for road pavement subgrade

Materials forming sand grains and colluvial soil deposits have a distinct structure, consisting of a composite matrix of coarse and fine soil grains. The influence of sand grains content on the behaviour of sand–clay mixtures was investigated by a series of intensive laboratory experiments. The California bearing ratio (CBR), unconfined compression strength (UCS) and compaction tests were carried out on various contents of sand and clay mixtures. The sand–clay mixtures were prepared with sand contents of 0, 10, 20, 30, 40, and 50% by weight. The laboratory tests on these mixtures have indicated that their behaviour will depend on the relative concentration of the sand and clay samples. The results of the tests showed a decrease in the UCS, and an increase the CBR values with an increase in the amount of sand. An increase in dry unit weight and a decrease in respective moisture content by an increase in the amount of sand were observed in the compaction tests.     

PIV investigations on particle velocity distribution in uniform swirling regime of fluidization

In this study, hydrodynamics of spherical particles in uniform swirling regime of a fluidized bed were investigated using MATLAB supported particle imaging velocimetry (PIV). A least investigated mesh-type distributor was used to fluidize the bed particles, at different air entry angles, for future applications in coating and granulation industry. A quarter of the bed was photographed using high speed imaging technique and the respective velocity fields of the swirling particles were produced using PIV technique. The Gaussian distribution of the particle velocity profiles was predicted at low superficial air velocity; particles near the border of the bed showed relatively low velocity than that swirled in the middle of the test section. However, at high superficial velocity, the particles near the central cone moved with velocity comparable to the particle velocity in the middle of the test section. Contrarily, the particles in the vicinity of the outer bed-wall maintained their steady state motion at all superficial air velocities. The average particle velocity experienced monotonic increase for more angular air intake. The magnitude of the particle velocity reduced by 6.35% for each \(3^{\circ }\) increment in the air entry angle.     

Eco‐friendly synthesis of silver nanoparticles and its larvicidal property against fourth instar larvae of Aedes aegypti

In this study, larvicidal activity of silver nanoparticles (AgNPs) synthesised using apple extract against fourth instar larvae of Aedes aegypti was determined. As a result, the AgNPs showed moderate larvicidal effects against Ae. aegypti larvae (LC₅₀  = 15.76 ppm and LC₉₀  = 27.7 ppm). In addition, comparison of larvicidal activity performance of AgNPs at high concentration prepared using two different methods showed that Ae. aegypti larvae was fully eliminated within the duration of 2.5 h. From X‐ray diffraction, the AgNP crystallites were found to exhibit face centred cubic structure. The average size of these AgNPs as estimated by particle size distribution was in the range of 50–120 nm. The absorption maxima of the synthesised Ag showed characteristic Ag surface plasmon resonance peak. This green synthesis provides an economic, eco‐friendly and clean synthesis route to Ag.Inspec keywords: silver, nanofabrication, X‐ray diffraction, zoology, particle size, nanoparticles, biomedical materials, nanomedicineOther keywords: time 2.5 h, size 50 nm to 120 nm, silver nanoparticle, larvicidal property, instar larvae, Aedes aegypti, larvicidal effect, larvicidal activity performance, X‐ray diffraction, nanoparticle particle size distribution, absorption maxima, silver surface plasmon resonance peak     

Morphological exploration of chemical vapor–deposited P-doped ZnO nanorods for efficient photoelectrochemical water splitting

Photoelectrochemical (PEC) water splitting is beneficial and has received attractive attention due to a greater potential to generate hydrogen and oxygen from water by using plentiful solar light to solve the problem of energy crisis. Various active semiconductor materials are used in PEC water splitting applications. Nevertheless, in past decades, most of the researchers suggested that titanium oxide (TiO₂) is the best photoanode for this type of applications. Now, Zinc oxide (ZnO) is considered a perfect substitution to TiO₂ due to its comparable energy band structure and superior photogenerated electron transfer rate. In this study, bare and phosphorous-doped ZnO nanorods were successfully developed on fluorine-doped tin oxide-coated glass (FTO) substrate by chemical vapor deposition. X-ray diffraction (XRD) pattern authenticated hexagonal structure formation with strong diffraction peak of (101), which showed that ZnO nanorods were perfectly developed along c axis. The optical and morphological properties were analyzed by UV–Vis and scanning electron microscopy images. The energy-dispersive X-ray spectra demonstrated that doping agent phosphorous was present in ZnO nanorods. The PEC properties of the developed ZnO nanorods were further investigated and obtained results suggested that a small amount of phosphorous-doped ZnO nanorods enhances their PEC performance.