High-performance a-IGZO-based flexible TTFT with stacked dielectric layers via ultrathin high-κ SrTiO3 buffer layer grown on HfO2

Journal of Materials Science: Materials in Electronics - In this study, ITO-coated PET was used as the substrate to create a flexible and transparent structure. a-IGZO (amorphous InGaZnO4) is...     

Towards more active and stable PdAgCr electrocatalysts for formic acid electrooxidation: The role of optimization via response surface methodology

In this study, multiwall carbon nanotube (MCNT)‐supported Pd (Pd/MWCNT) catalysts are prepared by using NaBH₄ reduction method. In order to maximize the oxidation and reduction of H₂SO₄, synthesis conditions (Pd ratio, molar ratio of NaBH₄/K₂PdCl₄, volume of deionized water, and duration of agitation) are optimized by using response surface methodology (RSM). The optimum synthesis conditions are determined as 58.2% of Pd by weight, 154.6 molar ratio of NaBH₄ to K₂PdCl₄, 19.48 mL of deionized water, and 186.16 min of agitation duration. The effect of electrochemical measurement conditions on the oxidation kinetics of Pd/MWCNT is also investigated by RSM. The optimum electrochemical measurement conditions are found as 10 μL of catalyst mixture, 90°C of H₂SO₄ solution, and 5.5 M H₂SO₄. The Pd/MWCNT, Pd₅₀Ag₅₀/MWCNT, and Pd_65.6Ag_33.6Cr_0.80/MWCNT catalysts prepared under optimized conditions are characterized by using X‐ray diffraction, transmission electron microscopy, N₂ adsorption‐desorption, and inductively coupled plasma mass spectrometry. The crystallite sizes of these catalysts are found as 4.85, 5.66, and 5.26 nm for Pd/MWCNT, Pd₅₀Ag₅₀/MWCNT, and Pd_65.6Ag_33.6Cr_0.80/MWCNT catalysts, respectively. Isotherms of all these catalysts are found to be similar to Type V isotherms with H3 hysteresis loop. The average particle size of Pd₅₀Ag₅₀/MWCNT and Pd_65.6Ag_33.6Cr_0.80/MWCNT catalysts are determined as 5.2 and 9.2 nm, respectively. Electrochemical performance of as‐prepared catalysts is evaluated by using cyclic voltammetry and chronoamperometry. The formic acid electrooxidation (FAEO) activities are found as 18.9, 27.8, and 51.6 mA/cm² for Pd/MWCNT, Pd₅₀Ag₅₀/MWCNT, and Pd_65.6Ag_33.6Cr_0.80/MWCNT, respectively. Pd_65.6Ag_33.6Cr_0.80/MWCNT shows the highest activity and stability. Optimization of synthesis conditions and electrochemical measurement parameters allow us to obtain very good electrochemical activity and stability for FAEO reaction compared with anode catalysts in the literature.     

A new classification approach for prediction of flyrock throw in surface mines

Bulletin of Engineering Geology and the Environment - A novel classification approach was proposed for prediction of flyrock throw distance based on the site measurements performed in a sandstone...     

A simulation as a service cloud middleware

Many seemingly simple questions that individual users face in their daily lives may actually require substantial number of computing resources to identify the right answers. For example, a user may want to determine the right thermostat settings for different rooms of a house based on a tolerance range such that the energy consumption and costs can be maximally reduced while still offering comfortable temperatures in the house. Such answers can be determined through simulations. However, some simulation models as in this example are stochastic, which require the execution of a large number of simulation tasks and aggregation of results to ascertain if the outcomes lie within specified confidence intervals. Some other simulation models, such as the study of traffic conditions using simulations may need multiple instances to be executed for a number of different parameters. Cloud computing has opened up new avenues for individuals and organizations with limited resources to obtain answers to problems that hitherto required expensive and computationally-intensive resources. This paper presents SIMaaS, which is a cloud-based Simulation-as-a-Service to address these challenges. We demonstrate how lightweight solutions using Linux containers (e.g., Docker) are better suited to support such services instead of heavyweight hypervisor-based solutions, which are shown to incur substantial overhead in provisioning virtual machines on-demand. Empirical results validating our claims are presented in the context of two case studies.     

The influence of binder content on the water transport properties of waterborne acrylic paints

Diffusion coefficients and sorption isotherms of water in waterborne acrylic paint films and in the pure binder of the paints have been measured by gravimetric sorption. Solubility of water was found to enhance with the increased binder content in the paint films while the diffusivity of water decreased significantly. Sorption isotherms in the paint and pure copolymer films were correlated with the Flory Huggins theory and ENSIC model, respectively. Fickian diffusion was observed in both types of films and the kinetic data were best correlated with a numerical model which takes into account the concentration dependency of the diffusion coefficient and the dimensional change of the film due to sorption. It was concluded that the utilization of a simplified analytical solution may lead to significant errors in the estimation of diffusivities.     

Low-methoxyl pectin–zeolite hydrogels controlling drug release promote in vitro wound healing

This study presents the design of novel hydrogel films, based on low-methoxyl (LM) pectin and NaA- or ZnA-zeolite particles, to serve as wound dressing materials with controlled drug delivery properties. We studied the effects of the preparation method of hydrogels, the amounts of crosslinker, drug and zeolite, and the type of cation in zeolites on the drug release mechanisms from the hydrogels. Ionic strengths of both film and external medium dictated the drug release behavior of the films, while the other parameters also played essential roles. NaA-zeolite hydrogels prepared using membrane diffusion controlled system, could reach a drug release ratio of 86% within 5 h. The drug-free hydrogels displayed no cytotoxicity while supporting cell proliferation and migration. Our cost-effective LM pectin–zeolite hydrogels promise to be effective wound dressing materials with controlled drug delivery ability, transparency, good swelling properties, ability to hold fluids, good oxygen transmission rate, and biocompatibility. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47640.     

Photovoltaic solar cell properties of CdxZn1−xO films prepared by sol–gel method

Cd_xZn_1−xO films have been deposited by sol–gel spin-coating method onto glass substrates. The Cd/Zn ratio in solution was changed from 0 to 1. Zinc acetate dehydrates, cadmium acetate dehydrates, 2-methoxyethanol and monoethanolamine were used as a starting material (zinc and cadmium), solvent and stabilizer, respectively. The crystal structure and orientation of the films were investigated by X-ray diffraction (XRD) patterns. XRD patterns show that the films are polycrystalline nature. As x varies from 0 to 1, it was observed that the crystal structure changed from wurtzite (ZnO) to cubic (CdO) structure. The optical properties of these films have been investigated by means of the optical transmittance and reflectance spectra. A significant change in optical absorption edge, optical band gap and optical constant with variation in composition was observed.     

Effect of heat treatment on physical properties of CdO films deposited by sol–gel method

CdO film has been deposited by sol–gel spin coating method on the glass substrate and then the film has been annealed at 400, 500, 600 °C for 1 h. Effect of annealing temperature on the structural and optical properties of the film has been investigated. The crystal structure and orientation of the as-grown and annealed CdO films have been investigated by X-ray diffraction method. Annealed CdO films are polycrystalline with (111) preferential orientation. The information on strain and grain size is obtained from the full width-at-half-maximum (FWHM) of the diffraction peaks. Texture coefficient and lattice constant have been calculated. The surface morphology of the films has been analyzed. The optical band gap value decreased with increasing the annealing temperatures.