The effects of warmth and CO2 concentration,with and without bioeffluents,on the emission of CO2 by occupants and physiological responses

The emission rate of carbon dioxide (CO₂) depends on many factors but mainly on the activity level (metabolic rate) of occupants. In this study, we examined two other factors that may influence the CO₂ emission rate, namely the background CO₂ concentration and the indoor temperature. Six male volunteers sat one by one in a 1.7 m³ chamber for 2.5 h and performed light office-type work under five different conditions with two temperature levels (23 vs. 28°C) and three background concentrations of CO₂ (800 vs. 1400 vs. 3000 ppm). Background CO₂ levels were increased either by dosing CO₂ from a cylinder or by reducing the outdoor air supply rate. Physiological responses to warmth, added CO₂, and bioeffluents were monitored. The rate of CO₂ emission was estimated using a mass-balance equation. The results indicate a higher CO₂ emission rate at the higher temperature, at which the subjects were warm, and a lower emission rate in all conditions in which the background CO₂ concentration increased. Physiological measurements partially explained the present results but more measurements are needed.     

Analysis of Transglucosylation Products of Aspergillus niger α-Glucosidase that Catalyzes the Formation of α-1,2- and α-1,3-Linked Oligosaccharides

According to whole-genome sequencing, Aspergillus niger produces multiple enzymes of glycoside hydrolases (GH) 31. Here we focus on a GH31 α-glucosidase, AgdB, from A. niger . AgdB has also previously been reported as being expressed in the yeast species, Pichia pastoris ; while the recombinant enzyme (rAgdB) has been shown to catalyze tranglycosylation via a complex mechanism. We constructed an expression system for A. niger AgdB using Aspergillus nidulans . To better elucidate the complicated mechanism employed by AgdB for transglucosylation, we also established a method to quantify glucosidic linkages in the transglucosylation products using 2D NMR spectroscopy. Results from the enzyme activity analysis indicated that the optimum temperature was 65 °C and optimum pH range was 6.0–7.0. Further, the NMR results showed that when maltose or maltopentaose served as the substrate, α-1,2-, α-1,3-, and small amount of α-1,1-β-linked oligosaccharides are present throughout the transglucosylation products of AgdB. These results suggest that AgdB is an α-glucosidase that serves as a transglucosylase capable of effectively producing oligosaccharides with α-1,2-, α-1,3-glucosidic linkages.     

Acceleration of calcium phosphate formation on bioactive PMMA-based bone cement by controlling spatial design

Polymethylmethacrylate (PMMA)-based bone cement is widely used for the fixation of artificial joints. However, it is not considered a bioactive material because it lacks the ability to induce a direct bond with bone. In order to improve the long-term stability of cemented fixations, the development of bioactive bone cements is desirable. An essential requirement of a bioactive material includes the induction of bone-like apatite on its surface within the in vivo environment. Previously, we prepared bioactive PMMA-based bone cements by a modification with water-soluble calcium salts and alkoxysilane. Because spatial design may enhance apatite formation on bioactive material surfaces in vivo, we aimed to evaluate the effect of spatial design on apatite formation on modified PMMA-based bone cements in simulated body fluid (SBF). We found that an appropriate spatial design shortened the induction period for the apatite deposition on the modified bone cements. It is expected that osteoconduction would be enhanced in spontaneously created gap between the cement and the host bone leading to tight integration.     

Cloning and characterization of a β-N-acetylglucosaminidase (BmFDL) from silkworm Bombyx mori

In insects, β-N-acetylglucosaminidase (GlcNAcase) participates in critical physiological processes such as fertilization, metamorphosis, and glycoconjugate degradation. Insects produce glycoproteins carrying paucimannosidic-type N-glycans, the terminal GlcNAc residue of which is cleaved by a GlcNAc-linkage specific GlcNAcase, also known as the fused lobes (FDL) protein. To obtain information on the structure of GlcNAcases and insight into their contribution to physiological processes, we cloned Bombyx mori FDL (BmFDL) from silkworm larvae. The full-length cDNA (1.9 kb) encoded a protein of 633 amino acids with 42% amino acid sequence identity to Drosophila melanogaster FDL (DmFDL). Recombinant BmFDL cleaved only β-1,2-linked GlcNAc residues from the α-1,3 branch of biantennary N-glycan. This substrate specificity was similar to that of DmFDL. Microsomal FDL activity was inhibited by anti-BmFDL antibodies. Taken together, our results suggest that BmFDL is a N-glycan-processing GlcNAcase in B. mori.     

Numerical assessment of the seismic response of an earth embankment on liquefiable soils

This study presents a numerical assessment of the seismic behaviour of an earth embankment founded on liquefiable foundation soils during earthquake loading. Analysis was carried out using an effective stress-based, fully coupled, finite element method. The behaviour of the sandy soil is described by means of a cyclic elastoplastic constitutive model which was developed within the framework of the Armstrong–Frederick type non-linear kinematic hardening concept. The numerical method and the analysis procedure are briefly outlined and as an example, the seismic response of an earth embankment on a saturated sand foundation is assessed. Based on the numerical results, the distinctive patterns of seismic response of the embankment are discussed. Special emphasis is given to the computed results of excess pore water pressures, co-seismic and post-seismic deformations, and accelerations during the seismic excitation. It has been found that the numerical model can capture fundamental liquefaction aspects of the embankment foundation system and produce preliminary results for its seismic assessment.      

Characterization and electrochemical properties of CF4 plasma-treated boron-doped diamond surfaces

The effect of CF₄ plasma etching on diamond surfaces, with respect to treatment time, was investigated using scanning electron microscopy (SEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and electrochemical measurements. SEM observations and Raman spectra indicated an increase in surface roughening on a scale of 10–20 nm, and an increase in crystal defect density was apparent with treatment time in the range of 10 s to 30 min. In contrast, alteration of the diamond surface terminations from oxygen to fluorine was found to be rather rapid, with saturation of the F/C atomic ratio estimated from XPS analysis after treatment durations of 1 min and more. The redox kinetics of Fe(CN)₆^3−/4− was also found to be significantly modified after 10 s of CF₄ plasma treatment. This behavior shows that C–F terminations predominantly affect the redox kinetics compared to the effect on the surface roughness and crystal defects. The double-layer capacitance (C_dl) of the electrolyte/CF₄ plasma-treated boron-doped diamond interface was found to show a minimum value at 1 min of treatment. These results indicate that a short-duration CF₄ plasma treatment is effective for the fabrication of fluorine-terminated diamond surfaces without undesirable surface damage.     

Study on Shock Wave and Turbulent Boundary Layer Interactions in a Square Duct at Mach 2 and 4

In this paper, the outline of the Mach 4 supersonic wind tunnel for the investigation of the supersonic internal flows in ducts was firstly described. Secondly, the location, structure and characteristics of the Mach 2 and Mach 4 pseudo-shock waves in a square duct were investigated by color schlieren photographs and duct wall pressure fluctuation measurements. Finally, the wall shear stress distributions on the side, top and bottom walls of the square duct with the Mach 4 pseudo-shock wave were investigated qualitatively by the shear stress-sensitive liquid crystal visualization method. The side wall boundary layer separation region under the first shock is narrow near the top wall, while the side wall boundary layer separation region under the first shock is very wide near the bottom wall.     

Nonlinear adaptive control system design and experiment for a 3-DOF model helicopter

This paper deals with model following control of a model helicopter with three degree-of-freedom. Since the decoupling matrix is singular, a nonlinear structure algorithm is used to design the controller. Furthermore, since the model dynamics are described linearly by unknown system parameters, a well-known parameter estimation technique is introduced. The integral type of estimation model is proposed here since the use of the derivative type of model cannot obtain the desired estimation result. The experimental results show the effectiveness of the proposed method. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008