Lethality of the covalent linkage between mislocalized major outer membrane lipoprotein and the peptidoglycan of Escherichia coli

The major outer membrane lipoprotein (Lpp) of Escherichia coli possesses serine at position 2, which is thought to function as the outer membrane sorting signal, and lysine at the C terminus, through which Lpp covalently associates with peptidoglycan. Arginine (R) is present before the C-terminal lysine in the wild-type Lpp (LppSK). By replacing serine (S) at position 2 with aspartate (D), the putative inner membrane sorting signal, and by deleting lysine (K) at the C terminus, Lpp mutants with a different residue at either position 2 (LppDK) or the C terminus (LppSR) or both (LppDR) were constructed. Expression of LppSR and LppDR little affected the growth of E. coli. In contrast, the number of viable cells immediately decreased when LppDK was expressed. Prolonged expression of LppDK inhibited separation of the inner and outer membranes by sucrose density gradient centrifugation, whereas short-term expression did not. Pulse-labeled LppDK and LppDR were localized in the inner membrane, indicating that the amino acid residue at position 2 functions as a sorting signal for the membrane localization of Lpp. LppDK accumulated in the inner membrane covalently associated with the peptidoglycan and thus prevented the separation of the two membranes. Globomycin, an inhibitor of lipoprotein-specific signal peptidase II, was lethal for E. coli only when Lpp possessed the C-terminal lysine. Taken together, these results indicate that the inner membrane accumulation of Lpp per se is not lethal for E. coli. Instead, a covalent linkage between the inner membrane Lpp having the C-terminal lysine and the peptidoglycan is lethal for E. coli, presumably due to the disruption of the cell surface integrity.     

Fuzzy inference and fuzzy inference processor

Fuzzy inference, a data processing method based on the fuzzy theory that has found wide use in the control field, is reviewed. Consumer electronics, which accounts for most current applications of this concept, does not require very high speeds. Although software running on a conventional microprocessor can perform these inferences, high-speed control applications require much greater speeds. A fuzzy inference date processor that operates at 200000 fuzzy logic inferences per second and features 12-b input and 16-b output resolution is described     

Pixel design of pulsed CMOS image sensor for retinal prosthesis with digital photosensitivity control

A newly designed pulse frequency modulation photosensor for use in retinal prosthesis is proposed and demonstrated. The pixel converts the intensity of incident light into biphasic current pulses at frequencies suitable for the electrical stimulation of retinal neurons. Experimental results showed that the device was sensitive over a dynamic range of input light of about 120 dB, and that photosensitivity could be varied from 0 dB to around -40 dB.     

Stability analysis of regional and national voting schemes by a continuous model

The previous discrete-model-based stability analysis of regional and national voting has been extended to a continuous-model-based analysis in the simultaneous presence of white and concentrated components of noise, reconfirming the previous conclusion that regional voting with smaller sized regions always demonstrates an improved stability over those with larger sized regions, including the national voting in its limiting case in particular. The conclusion remains valid as long as the weak distribution assumption is valid.     

Involvement of specific mechanism in plasmid DNA uptake by mouse peritoneal macrophages

Lamina-associated polypeptide (LAP)2, which directly interacts with B-type lamins and chromosomes, is an integral membrane protein specifically distributed along the inner nuclear membrane of the nuclear envelope. Multiple regions of its large nucleoplasmic domain promote this localization, including the first (residues 1-296) and the second (residues 298-409) halves of the LAP2 N terminus. The second half is involved in LAP2 association with the nuclear lamina [Furukawa, K., Panté, N., Aebi, U. & Gerace, L. (1995) EMBO J. 14, 1626-1636]. In this study to further define its role, we examined which domain of B-type lamin interacts with LAP2 by means of a binding assay with bacterially expressed proteins and a yeast two-hybrid system. We found that amino acids in the region of residues 78-258 of the lamin B1 rod domain directly bound with LAP2. The data suggest that LAP2 may modulate the assembly of nuclear lamins.     

Links between Immune Cells from the Periphery and the Brain in the Pathogenesis of Epilepsy: A Narrative Review

Accumulating evidence has demonstrated that the pathogenesis of epilepsy is linked to neuroinflammation and cerebrovascular dysfunction. Peripheral immune cell invasion into the brain, along with these responses, is implicitly involved in epilepsy. This review explored the current literature on the association between the peripheral and central nervous systems in the pathogenesis of epilepsy, and highlights novel research directions for therapeutic interventions targeting these reactions. Previous experimental and human studies have demonstrated the activation of the innate and adaptive immune responses in the brain. The time required for monocytes (responsible for innate immunity) and T cells (involved in acquired immunity) to invade the central nervous system after a seizure varies. Moreover, the time between the leakage associated with blood–brain barrier (BBB) failure and the infiltration of these cells varies. This suggests that cell infiltration is not merely a secondary disruptive event associated with BBB failure, but also a non-disruptive event facilitated by various mediators produced by the neurovascular unit consisting of neurons, perivascular astrocytes, microglia, pericytes, and endothelial cells. Moreover, genetic manipulation has enabled the differentiation between peripheral monocytes and resident microglia, which was previously considered difficult. Thus, the evidence suggests that peripheral monocytes may contribute to the pathogenesis of seizures.     

Current distribution in a two-dimensional narrow gap cell composed of a gas evolving electrode with an open part

On the basis of the observation of gas bubbles evolved by electrolysis, a two-dimensional vertical model cell composed of electrodes with open parts for releasing gas bubbles to the back side is proposed. The model cell consists of two layers. One layer forms a bubble curtain with a maximum volume fraction of gas bubbles in the vicinity of the working electrode with open parts. The other. being located out of the bubble layer, is a convection layer with a small volume fraction distributed in the vertical direction under forced convection conditions. The cell resistance and the current distribution were computed by the finite element method when resistivity in the back side varied in the vertical direction along the cell. The following three cases for overpotential were considered: no overpotential, overpotential of the linear type and overpotential of the Butler-Volmer type. It was found that the cell resistance was determined not only by the interelectrode gap but also by the percentage of open area and in some cases by the superficial surface area. The cell resistance varied only slightly with the distribution of the bubble layer in the back side.Nomenclature b linear overpotential coefficient given byb=/i - C proportionality constant given by Equation 15 - d ₁ distance between front side of working electrode and separator - d ₂ thickness of separator - F Faraday constant - I total current per half pitch - i current density at working electrode - i ₀ exchange current density - L length of a real electrolysis cell - n number of electrons transferred in electrode reaction - O _p percentage of open area given by Equation 1 - p pitch, i.e. twice the length of the unit cell, defined by 2(BC) in Fig. 4 - q thickness of bubble curtain, defined by (AM) in Fig. 4 - R gas constant - r _t total cell resistance - r unit-cell resistance defined by (V – V _eq)/I - r _rs residue ofr from sum ofr ₀ andr - r ₀ ohmic resistance of solution when0 _p=0 - r resistance due to overpotential when0 _p=0 - s electrode surface ratio or superficial surface area given by Equation 2 for the present model - T absolute temperature - t thickness of working electrode defined by EF in Fig. 4 - V cell voltage - V _eq open circuit potential difference between working and counter electrodes - solution velocity in cell - ₀ solution velocity at bottom of cell - w width of working electrode, defined by 2(DE) in Fig. 4 - x abscissa located on cell model - y ordinate located on cell model - anodic transfer coefficient - linear overpotential kinetic parameter defined byb/[_bc(p/2)] - d infinitesimally small length on the boundary - volume fraction of gas bubbles in cell - dimensionless cell voltage defined bynF(V – V _eq)/RT - overpotential at working electrode - Butler-Volmer overpotential kinetic parameter defined by [nFi _0bc(p/2)]/RT - coordinate perpendicular to boundary of model cell - ₁ resistivity of bubble-free solution - ₂ resistivity of separator - _bc resistivity of bubble curtain - potential in cell     

Expectation-maximization algorithms for inference in Dirichlet processes mixture

Mixture models are ubiquitous in applied science. In many real-world applications, the number of mixture components needs to be estimated from the data. A popular approach consists of using information criteria to perform model selection. Another approach which has become very popular over the past few years consists of using Dirichlet processes mixture (DPM) models. Both approaches are computationally intensive. The use of information criteria requires computing the maximum likelihood parameter estimates for each candidate model whereas DPM are usually trained using Markov chain Monte Carlo (MCMC) or variational Bayes (VB) methods. We propose here original batch and recursive expectation-maximization algorithms to estimate the parameters of DPM. The performance of our algorithms is demonstrated on several applications including image segmentation and image classification tasks. Our algorithms are computationally much more efficient than MCMC and VB and outperform VB on an example.     

A 60-GHz point-to-multipoint millimeter-wave fiber-radio communication system

A 60-GHz point-to-multipoint wireless access link with data rate of 156 Mb/s incorporating 60-GHz transceiver modules and full-duplex fiber-optic millimeter-wave transmission is developed for short-range applications such as indoor wireless local area networks and intelligent transport systems. For compact system configuration, a small-size millimeter-wave transceiver module with planar antennas is developed. The transceiver module is based on broadband planar integration and packaging of millimeter-wave circuits. The RF output power is +10 dBm and the measured 3-dB antenna beamwidth is 30/spl deg/. The total size of the developed 60-GHz transceiver module, except input and output connectors, is 50 mm /spl times/ 75 mm /spl times/ 35 mm. A point-to-point full duplex fiber-optic configuration is extended to the scheme with multiple access points (APs) by using a tree coupler and a dense wavelength division multiplexing multiplexer. The AP has a simple configuration without frequency conversion. The bit error rate and packet error rate performances of the 60-GHz fiber-radio access link are evaluated. Furthermore, the effect of the extension to the scheme with multiple APs is investigated.     

An optoelectronic self-oscillatory circuit with an optical fiber delayed feedback and its injection locking technique

An optoelectronic self-oscillatory circuit with a constant time delay and its injection locking have been theoretically and experimentally described. The oscillation circuit incorporates a delayed feedback path by utilizing an optical fiber and is characterized by a differential-difference equation. The oscillation waveform and amplitude have been investigated by computing the equation. It is also shown that a stable frequency locking region exists and expands with an increase in the injection amplitude. By employing a carrier signal, two methods for optoelectronic oscillation, an AM and an FM type, are proposed and have been demonstrated to obtain more stable oscillation.