Detection and analysis of triterpenic compounds in apple extracts

A new technique for the rapid detection and analysis of triterpenic compounds in apple extracts using HPLC was developed and validated. The main advantage of this technique is the short duration of the analysis – this makes this technique superior to others currently applied for the routine HPLC analysis of triterpenic compounds. The developed, optimized, and validated technique was used for the evaluation of triterpenic compounds in samples of different cultivars of apples, their peels, and flesh. In total, four triterpenic compounds were isolated and identified. Ursolic acid was the dominant compound in all the tested apple samples. The highest amounts of triterpenic compounds were detected in the peels of the ‘Lodel’ apple cultivar, and thus apples of this cultivar may be potentially useful for the isolation of individual compounds and the production of functional food and dietary supplements.     

Expanded Polystyrene Foam Formed from Polystyrene Beads Coated with a Nanocrystalline SiO2 Film and the Analysis of Its Moisture Adsorption and Resistance to Mechanical Stress

Conventional expanded polystyrene can absorb moisture, which significantly degrades its properties. In the present study, it was demonstrated that SiO₂ can be deposited on polystyrene beads before pre-expansion and molding steps. Under the applied test conditions, expanded polystyrene with nanocrystalline SiO₂ additives had approximately 10% lower moisture adsorption and an 8.4% better resistance to deformation. Expanded polystyrene analysis suggested that the observed improvements were caused by the hydrophobic nature of nanocrystalline SiO₂ and, even more importantly, because SiO₂ acted as an amalgamation catalyst and significantly increased adhesion between the expanded polystyrene beads during the expanded polystyrene molding process.     

The properties of samarium doped ceria oxide thin films grown by e-beam deposition technique

One of the main challenges in today's solid oxide fuel cell (SOFC) technology is the reduction of their operating temperature. New types of oxygen ion conducting materials are currently under investigation to overcome the problems which SOFC faces at high temperatures. Samarium doped ceria oxide (SDC) was the material of investigation in this work. Optical quartz (SiO₂) and Fe–Ni–Cr alloy (Alloy 600) were the two types of chosen substrates onto which SDC thin films were deposited by e-beam evaporation technique. The bias voltage was applied to the substrate during film growth. It had an influence on film formation, its microstructure and density because of the ionized particles presence in the SDC vapor stream. Changes in crystallite size and surface morphology were determined from X-ray diffraction data and scanning electron microscopy images. Influence of bias voltage on porosity of formed SDC thin films on optical quartz were calculated from transmittance spectra data by using Swanepoel method. The porosity decreases up to 12% by decreasing bias voltage from 0 to ?150 V.     

E-beam lithography of computer generated holograms using a fully vectorial 3D beam propagation method

A fully vectorial 3D beam propagation method (BPM) has been applied to obtain a required pattern of computer generated hologram (CGH) with a variable profile of four phase levels. The computer reconstruction of the CGH image having one and two focal spots was performed by application of the fully vectorial 3D BPM method. After transferring the CGH by EBL technique an adequate phase profile was obtained. Inter-level parameter method was developed to obtain the estimated an electron beam dose required for the even topographical patterning. Using this method, an EBL exposure dose determined to achieve the required relief amplitude of 1.29 μm was 43 μC/cm². The manufactured holograms showed that the overall proposed production process, from the 3D BPM computer simulation to e-beam lithography, can be used to obtain good quality product with reasonable time and computational resources.     

Effect of two different rubbers as secondary binders on the friction and wear characteristics of non-asbestos organic (NAO) brake friction materials

Binder provides structural integrity by holding all ingredients in the composition of a brake friction material. The modified binders have played a major role in improving the frictional performance and thermal resistance of the friction material. The present research work evaluates the influence of secondary binders (Nitrile Butadiene rubber (NBR) and Styrene Butadiene rubber (SBR)) on the tribological performance of the friction material using a full-scale inertia brake dynamometer as per JASO C406 standard. Three brake pads were developed by varying the type and composition of secondary rubber binder (5%NBR, 5%SBR and 2.5%NBR + 2.5%SBR) with rest of the ingredients kept unaltered. It was found that the quantity of SBR rubber powder present as secondary binder improved dry and wet recovery. Friction coefficient (μ) exhibited better stability during the fade with the inclusion of both the rubber powders. The friction material with the inclusion of both the NBR and SBR rubber powders exhibited overall better performance than compared to the inclusion of only one secondary binder rubber in the composition. The worn-out surface of the developed friction materials and the counter discs were characterised using FESEM.     

A toolbox for adding knowledge-based modules to existing statistical software

This paper describes TAXSY, a consultation system shell written in SAS^®. TAXSY consists of a set of SAS programs which, with the addition of datasets with rules and interface code, form a flexible system for knowledge-based consultation. The design makes the knowledge transparent and allows easy modification and experimentation.SAS, SAS/STAT, SAS/AF and SAS/IML are registered trademarks of SAS Institute Inc., Cary, NC, USA.     

Blocking of classical complement pathway inhibits endothelial adhesion molecule expression and preserves ischemic myocardium from reperfusion injury

Myocardial injury after ischemia (I) and reperfusion (R) is related to leukocyte activation with subsequent release of cytokines and oxygen-derived free radicals as well as complement activation. In our study, the cardioprotective effects of exogenous C1 esterase inhibitor (C1 INH) were examined in a rat model of myocardial I + R (i.e., 20 min + 24 hr or 48 hr). The C1 INH (10, 50 and 100 U/kg) administered 2 min before reperfusion significantly attenuated myocardial injury after 24 hr of R compared to vehicle treated rats (P < .001). Further, cardiac myeloperoxidase activity (i.e., a marker of PMN [polymorphonuclear leukocyte] accumulation) in the ischemic area was significantly reduced after C1 INH treatment compared to vehicle treated animals (0.81 +/- 0.1, 0.34 +/- 0.13, 0.13 +/- 0.1 vs. 1.44 +/- 0.3 U/100 mg tissue, P < .001). In addition, C1 INH (100 U/kg) significantly attenuated myocardial injury and neutrophil infiltration even after 48 hr of reperfusion compared to vehicle treatment. Immunohistochemical analysis of ischemic-reperfused myocardial tissue demonstrated activation of classical complement pathway by deposition of C1q on cardiac myocytes and cardiac vessels. In addition, expression of the endothelial adhesion molecules P-selectin and intercellular adhesion molecule 1 (ICAM-1) was observed after reperfusion of the ischemic myocardium. In this regard, C1 INH administration abolished expression of P-selectin and ICAM-1 on the cardiac vasculature after myocardial ischemia and reperfusion. Blocking the classical complement pathway by exogenous C1 INH appears to be an effective means to preserve ischemic myocardium from injury after 24 and 48 hr of reperfusion. The mechanisms of this cardioprotective effect appears to be due to blocking of complement activation and reduced endothelial adhesion molecule expression with subsequent reduced PMN-endothelium interaction, resulting in diminished cardiac necrosis.     

Comparison of antiplatelet effects of aspirin, ticlopidine, or their combination after stent implantation

OBJECTIVE: To explore the basis of the gender-based differences in endocrine and surgical findings in patients with prolactinoma (prolactin cell adenoma) as well as in their clinical outcome. MATERIAL AND METHODS: In young or reproductive-age female patients, older women (beyond 40 years of age), and male patients, we systematically studied the following factors: operative and endocrine features (tumor size, invasiveness, preoperative serum prolactin level, and biochemical outcome), specific biologic variables (mitotic index, MIB-1 labeling index, and p27 immunoreactivity), and hormone receptor status (estrogen and progesterone receptor proteins as well as dopamine D2 receptor messenger RNA). RESULTS: Of the various factors assessed, the preoperative prolactin level and MIB-1 labeling index were lower in young female patients in comparison with older female and particularly male patients. Hormone levels were also positively associated with mitotic activity as well as the MIB-1 labeling index. Although invasion was infrequent in microadenomas of young female patients, no statistically significant differences in tumor size or invasiveness were noted among the three patient groups. Absence of differences in invasiveness may, in part, be explained by artifacts of case selection. CONCLUSION: The basis for the observed differences in proliferative activities in tumors of the three study groups is not readily apparent but may reflect differences in the endocrine milieu or the effect of sex steroid hormone receptors, tumoral vascularity, or specific growth factors.