Association of IgG1 Antibody Clearance with FcγRIIA Polymorphism and Platelet Count in Infliximab-Treated Patients

The FcγRIIA/CD32A is mainly expressed on platelets, myeloid and several endothelial cells. Its affinity is considered insufficient for allowing significant binding of monomeric IgG, while its H131R polymorphism (histidine > arginine at position 131) influences affinity for multimeric IgG2. Platelet FcγRIIA has been reported to contribute to IgG-containing immune-complexe clearance. Given our finding that platelet FcγRIIA actually binds monomeric IgG, we investigated the role of platelets and FcγRIIA in IgG antibody elimination. We used pharmacokinetics analysis of infliximab (IgG1) in individuals with controlled Crohn’s disease. The influence of platelet count and FcγRIIA polymorphism was quantified by multivariate linear modelling. The infliximab half-life increased with R allele number (13.2, 14.4 and 15.6 days for HH, HR and RR patients, respectively). It decreased with increasing platelet count in R carriers: from ≈20 days (RR) and ≈17 days (HR) at 150 × 10⁹/L, respectively, to ≈13 days (both HR and RR) at 350 × 10⁹/L. Moreover, a flow cytometry assay showed that infliximab and monomeric IgG1 bound efficiently to platelet FcγRIIA H and R allotypes, whereas panitumumab and IgG2 bound poorly to the latter. We propose that infliximab (and presumably any IgG1 antibody) elimination is partly due to an unappreciated mechanism dependent on binding to platelet FcγRIIA, which is probably tuned by its affinity for IgG2.     

Mangrove forests as a nature-based solution for coastal flood protection: Biophysical and ecological considerations

Nature-based coastal protection is increasingly recognised as a potentially sustainable and cost-effective solution to reduce coastal flood risk. It uses coastal ecosystems such as mangrove forests to create resilient designs for coastal flood protection. However, to use mangroves effectively as a nature-based measure for flood risk reduction, we must understand the biophysical processes that govern risk reduction capacity through mangrove ecosystem size and structure. In this perspective, we evaluate the current state of knowledge on local physical drivers and ecological processes that determine mangrove functioning as part of a nature-based flood defence. We show that the forest properties that comprise coastal flood protection are well-known, but models cannot yet pinpoint how spatial heterogeneity of the forest structure affects the capacity for wave or surge attenuation. Overall, there is relatively good understanding of the ecological processes that drive forest structure and size, but there is a lack of knowledge on how daily bed-level dynamics link to long-term biogeomorphic forest dynamics, and on the role of combined stressors influencing forest retreat. Integrating simulation models of forest structure under changing physical (e.g. due to sea-level change) and ecological drivers with hydrodynamic attenuation models will allow for better projections of long-term natural coastal protection.     

High‐Pressure Thermal Sterilization: Food Safety and Food Quality of Baby Food Puree

The benefits that high‐pressure thermal sterilization offers as an emerging technology could be used to produce a better overall food quality. Due to shorter dwell times and lower thermal load applied to the product in comparison to the thermal retorting, lower numbers and quantities of unwanted food processing contaminants (FPCs), for example, furan, acrylamide, HMF, and MCPD‐esters could be formed. Two spore strains were used to test the technique; Geobacillus stearothermophilus and Bacillus amyloliquefaciens, over the temperature range 90 to 121 °C at 600 MPa. The treatments were carried out in baby food puree and ACES‐buffer. The treatments at 90 and 105 °C showed that G. stearothermophilus is more pressure‐sensitive than B. amyloliquefaciens. The formation of FPCs was monitored during the sterilization process and compared to the amounts found in retorted samples of the same food. The amounts of furan could be reduced between 81% to 96% in comparison to retorting for the tested temperature pressure combination even at sterilization conditions of F₀‐value in 7 min.     

Predicting Survival Outcomes in the Presence of Unlabeled Data

Many clinical studies require the follow-up of patients over time. This is challenging: apart from frequently observed drop-out, there are often also organizational and financial challenges, which can lead to reduced data collection and, in turn, can complicate subsequent analyses. In contrast, there is often plenty of baseline data available of patients with similar characteristics and background information, e.g., from patients that fall outside the study time window. In this article, we investigate whether we can benefit from the inclusion of such unlabeled data instances to predict accurate survival times. In other words, we introduce a third level of supervision in the context of survival analysis, apart from fully observed and censored instances, we also include unlabeled instances. We propose three approaches to deal with this novel setting and provide an empirical comparison over fifteen real-life clinical and gene expression survival datasets. Our results demonstrate that all approaches are able to increase the predictive performance over independent test data. We also show that integrating the partial supervision provided by censored data in a semi-supervised wrapper approach generally provides the best results, often achieving high improvements, compared to not using unlabeled data.

     

Air-dictated bottom spray process: impact of fluid dynamics on granule growth and morphology

Background: Growing interest in the use of the less-explored bottom spray technique for fluidized bed granulation provided impetus for this study. Aim: The impact of fluid dynamics (air accelerator insert diameter; partition gap) and wetting (binder spray rate) on granule properties were investigated. Method: In this 3³ full factorial study, the results were fitted to a quadratic model using response surface methodology. The air velocity at the spray granulation zone for the investigated conditions was measured using a pitot tube. Results: Air accelerator insert diameter correlated to measured air velocity at the spray granulation zone and was found to not only dictate growth but also influence granule morphology. The partition gap was found to play important roles in regulating particle movement into the spray granulation zone and optimizing process yields, whereas binder spray rate significantly affected granule morphology but not granule size. Conclusions: Unlike conventional fluidized bed granulation, ease of modulation of fluid dynamics and insensitivity of the bottom spray process to wetting allow flexible control of granule size, shape, and flow. Its good drying ability also indicated potential use in granulating moisture-sensitive materials.     

Rheology of fiber filled polymer melts: Role of fiber‐fiber interactions and polymer‐fiber coupling

An experimental study and a numerical modeling analysis are carried out to examine the effects of fiber‐fiber interactions and coupling between fiber orientation and polymer chains conformation on the rheological properties of fiber suspensions. The experimental study allowed examination of large fiber volume fractions up to 35% over a range of shear rates that spans eight decades. This study confirmed already known results and led to new ones. In particular, a peak in the steady shear viscosity at the low shear rate region is observed at large volume fractions. Furthermore, new results regarding the applicability of the Cox‐Merz rule, the behavior of the damping factor, and the end pressure drops are reported, and physical interpretations are proposed. The results of the numerical modeling showed that it is necessary to account for the polymer‐fiber coupling factor to obtain a good fit between the model predictions and the experimental measurements. Comparisons between the model predictions and the experimental measurements allowed study of the variation of the parameters that govern the fiber‐fiber interactions and the polymer‐fiber coupling with the properties of the suspension and the flow. POLYM. ENG. SCI., 45:385–399, 2005. © 2005 Society of Plastics Engineers     

Transition to adulthood as a parent-youth project: Governance transfer, career promotion, and relational processes.

This study determined how youth (ages 17-21) and their parents jointly constructed and acted on goals and strategies pertinent to the transition to adulthood. Twenty parent-youth dyads were followed over an 8-month period using the qualitative action-project method. Data included their joint conversations, video recall of internal processes, self-monitoring logs, and researcher telephone monitoring. Detailed and repeated analysis of elements, functional steps, and goals resulted in the identification of an explicit joint project for each dyad that the participants saw as pertinent to the transition to adulthood. These projects referred broadly to the youth development of identity and social inclusion in the adult world and included the specific projects of career promotion, governance transfer, and parent-youth relational processes. The findings illustrate the complexity of the transition-to-adulthood process as well as its joint construction by parent and youth. Implications for practice include identifying and following the joint parent-youth transition project. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Greywater recycling in Vietnam — Application of the HUBER MBR process

Greywater is the part of domestic wastewater that is free of faeces. The volume and concentration of this separately collected wastewater flow depend on the consumer behaviour and vary according to its source. The average amount of greywater produced per day in a German household is 70 l per person, which is more than 50% of the total wastewater production [5]. This figure corresponds with the average figures provided for Chinese households (80 l per person/day, GB/T 50331-2002), but significantly exceeds the South African average of 20 l per person and day [1].Compared to domestic wastewater, greywater generally contains less organic pollutants, less nutrients but a high amount of tensides. The effluent from bath tubs, showers or wash hand basins contains for example a by approx. two decimal orders lower number of total and faecal coliform bacteria (Escherichiacoli) [2] and [6].Due to its relatively low content of pollutants, greywater is easy to treat with MBRs. The pollutants contained are decomposed by the bacteria of the activated sludge tank. The following membrane filtration unit separates the treated greywater from the activated sludge. The treated greywater is of high quality and hygienically safe so that it can be reused, alone or combined with rain water, for toilet flushing water, laundry washing or for irrigation purposes.Within the scope of the SANSED II research project HUBER has been successful in adapting the MBR system for greywater treatment to the specific conditions in Vietnam and testing the system in operation in a small city in the Mekong delta, South Vietnam. The wastewater from kitchen sinks and the bathrooms of a dormitory on the campus of Can Tho University was clarified in the HUBER GreyUse^® plant over a period of three months. The project aim was the production of high quality service water from greywater for safe reuse as toilet flush water.