Lowpass and bandpass transadmittance filter using operational amplifier pole

A new topology simultaneously implementing lowpass (LP) and bandpass (BP) transadmittance filtering signals using a single operational amplifier (OA), one capacitor, and two resistors is presented. The input impedance is very high which is essential for cascading without employment of buffers. The circuit uses absolute minimum number of active and passive components. The filter employs pole-model of OA and as such has acquired suitability for extended frequency operation. The circuit permits separate adjustment of natural frequency (ω₀) and quality factor (Q) in an orthogonal manner. The circuit has low sensitivity figures unlike the reported single amplifier biquads. The PSPICE simulation results are included.     

Electric field assisted solid-state interfacial joining of TaC-HfC ceramics without filler

The application of ultra-high-temperature ceramics (UHTCs) demands effective ways of joining in overcoming the problems associated with the fabrication of complex-shaped components. In this study, we choose to investigate a new method of rapidly joining pre-sintered TaC and HfC ceramics without any filler material using the spark plasma sintering (SPS) technique. A well-bonded TaC–HfC interface was observed with no apparent cracking and porosity at the joint. The joining mechanisms were predominantly driven by solid-state diffusion and localized plastic deformation. The nanomechanical properties of the TaC-HfC joint are better than the HfC while comparable to that of the TaC. High-load indentation (up to 200 N) results suggest that the TaC–HfC interface is stronger than the parent UHTCs with no crack propagating at the interface. Upon comparison with the parent UHTCs, the damaged area and the average crack length at the interface, reduced up to ~94% and ~56%, respectively. This study shows that the SPS technique can also apply to joining other UHTCs without any filler, resulting in the new field of developing complex components for the thermal protection system (TPS).     

Human-centered design of a wearable kinesthetic haptic device for surgical teleoperation

Artificial Life and Robotics - This paper describes the design and performance evaluation of a flexible wearable haptic device that aims to realize full kinesthetic haptic feedback for application...     

An efficient implicit regularized Lagrangian twin support vector regression

Twin support vector regression (TSVR) and Lagrangian TSVR (LTSVR) satisfy only empirical risk minimization principle. Moreover, the matrices in their formulations are always positive semi-definite. To overcome these problems, we propose an efficient implicit Lagrangian formulation for the dual regularized twin support vector regression, called IRLTSVR for short. By introducing a regularization term to each objective function, the optimization problems in our IRLTSVR are positive definite and implement the structural risk minimization principle. Moreover, the 1-norm of the vector of slack variable is replaced with 2-norm to make the objective functions strongly convex. Our IRLTSVR solves two systems of linear equations instead of solving two quadratic programming problems (QPPs) in TSVR and one large QPP in SVR, which makes the learning speed of IRLTSVR faster than TSVR and SVR. Particularly, we compare three implementations of IRLTSVR with existing approaches. Computational results on several synthetic and real-world benchmark datasets clearly indicate the effectiveness and applicability of the IRLTSVR in comparison to SVR, TSVR and LTSVR.     

Numerical and sensitivity analysis of MHD bioconvective slip flow of nanomaterial with binary chemical reaction and Newtonian heating

The impact of Stefan blowing on the MHD bioconvective slip flow of a nanofluid towards a sheet is explored using numerical and statistical tools. The governing partial differential equations are nondimensionalized and converted to similarity equations using apposite transformations. These transformed equations are solved using the Runge–Kutta–Fehlberg method with the shooting technique. Graphical visualizations are used to scrutinize the effect of the controlling parameters on the flow profiles, skin friction coefficient, local Nusselt, and Sherwood number. Moreover, the sensitivities of the reduced Sherwood and Nusselt number to the input variables of interest are explored by adopting the response surface methodology. The outcomes of the limiting cases are emphatically in corroboration with the outcomes from preceding research. It is found that the heat transfer rate has a positive sensitivity towards the haphazard motion of the nanoparticles and a negative sensitivity towards the thermomigration. The thermal field is enhanced by the Stefan blowing aspect. Moreover, the fluid velocity can be controlled by the applied magnetic field.     

Effect of Surface Finish on the Pitting Corrosion Behavior of Sensitized AISI 304 Austenitic Stainless Steel Alloys in 3.5% NaCl Solutions

The effect of surface condition down to 120 and 1000-grit finish, corresponding to 1.47 and 0.06 microns RMS (Root Mean Square), respectively, on the pitting corrosion behavior of sensitized and mill-annealed AISI (American iron and steel institute) 304 stainless steel was studied in 3.5% NaCl solutions at 23 and 50°C by electrochemical methods. The polarization curves have revealed a clear dependence of pitting corrosion on the surface finish, on the degree of sensitization, as well as on the test temperature. Surface condition has made a significant contribution to pit initiation in that the pitting potential was lowered as the surface roughness increased. The deleterious effect of surface roughness on the pitting potential of the AISI 304 stainless steel alloy in 3.5% NaCl is more pronounced on sensitized samples and becomes more evident with increasing sensitization time and test temperature.     

Implementation constraints in social enterprise and community Public Private Partnerships

Public Private Partnership (PPP) employs private sector expertise and skill to provide public goods and services. We examine three community PPP projects to identify critical success factors of the project outcomes. Two conclusions particularly stand out: first, the project must be aligned with both the public and private parties' business and service plans, and second, appropriate management structures and procedures must be established for obtaining this alignment. The latter effect recognizes the need to implement appropriate project governance practices including management discipline and expertise. We investigate these ideas further and present specific guidelines for PPP project design and implementation.     

Investigation of the impact of global warming on precipitation pattern of Saudi Arabia

This study has been carried out to forecast the impact of global warming on the precipitation pattern of Saudi Arabia by the end of year 2100. Simulation has been done using EdGCM model software (with available 8×10 resolution) developed at Columbia University on which there have been produced global precipitation maps for the seasonal and annual averages for the last 5 years (2096–2100). For each map, EdGCM grid values surrounding Saudi Arabia are used as input to one of the tools of Eagle point software called surface modelling (SM). SM is a new approach for downscaling global climate model results. SM software modelled out isohyets at 0.2 mm/day interval. The results indicate that the present pattern of precipitation (more in winter and less in summer) is going to change by almost equal occurrence of precipitation in all seasons for double_CO₂ (2CO₂) experiment. The 2CO₂ experiment indicates an increase of about 16.05% over the annual average precipitation across the country.     

Synthesis,Characterization and Surface Properties of Amidosulfobetaine Surfactants Bearing Odd-Number Hydrophobic Tail

Three amidosulfobetaine surfactants were synthesized namely: 3-(N-pentadecanamidopropyl-N,N-dimethyl ammonium) propanesulfonate (2a); 3-(N-heptadecanamidopropyl-N,N-dimethyl ammonium) propanesulfonate (2b), and 3-(N-nonadecanamidopropyl-N,N-dimethyl ammonium) propanesulfonate (2c). These surfactants were prepared by direct amidation of commercially available fatty acids with 3-(dimethylamino)-1-propylamine and subsequent reaction with 1,3-propanesultone to obtain quaternary ammonium salts. The synthesized surfactants were characterized by IR, NMR and mass spectrometry. Thermogravimetric analysis (TGA) results showed that the synthesized surfactants have excellent thermal stability with no major thermal degradation below 300 °C. The critical micelle concentration (CMC) values of the surfactants 2a and 2b were found to be 2.2 × 10^?4 and 1.04 × 10^?4 mol/L, and the corresponding surface tension (γ_CMC) values were 33.14 and 34.89 mN m^?1, respectively. The surfactants exhibit excellent surface properties, which are comparable with conventional surfactants. The intrinsic viscosity of surfactant (2b) was studied at various temperatures and concentrations of multi-component brine solution. The plot of natural logarithm of relative viscosity versus surfactant concentration obtained from Higiro et al. model best fit the surfactant behavior. Due to good salt resistance, excellent surface properties and thermal stability, the synthesized surfactant has potential to be used in various oil field applications such as enhanced oil recovery, fracturing, acid diversion, and well stimulation.