Easy Access to 1‐Amino and 1‐Carbon Substituted Isoquinolines via Cobalt‐Catalyzed C?H/N?O Bond Activation

A green atom‐economical method for the synthesis of highly functionalized 1‐amino and 1‐carbon substituted isoquinolines from the reaction of N′‐hydroxybenzimidamides and aryl ketoximes, respectively, with alkynes via pentamethylcyclopentadienylcobalt(III)‐catalyzed C H/N O bond activation is described. The external oxidant‐free annulation reaction uses the =NOH moiety in N′‐hydroxybenzimidamides or N‐aromatic ketone oximes as the directing group and internal oxidant. This first row transition metal‐catalyzed annulation serves as an efficient alternative for the synthesis of isoquinolines, as water is the only by‐product and expensive noble metals such as rhodium(III), iridium(III), palladium(II), and ruthenium(II) are not required. The reaction proceeds via C H activation, alkyne insertion, reductive elimination, and N O activation.

     

Performance and emission characteristics of direct injection diesel engine using linseed oil as biodiesel by varying injection timing

The depletion of fossil fuels and increasing demand leads to research in alternate fuels. The alternate fuels are bio-degradable, renewable and non-toxic. Many types of oils are re-used in biodiesel production, considering their availability, among which linseed oil is the most significant one. Injection timing plays a major role among various injection parameters which affects its performance and emission characteristics. This paper focuses on experimental investigation on a single cylinder, four-stroke direct injection diesel engine with output of 5.2?kW at 1500?rpm at various injection timings, 20, 23, 26 degree BTDC for observing the performance and emission characteristics of direct injection diesel engine using methyl esters of linseed oil and its blends. The blends are B10, B20, and fuel characteristics are observed. The results show that when compared with diesel it gives an increase in BTHE and reduction in SFC. Both the biodiesel blends give lesser NOx. Slightly higher CO and HC emission were found. The performance and emissions were increased in when injection increased.     

Heavy metals in maternal and cord blood

Heavy metal concentrations have been determined in maternal and cord blood samples collected from mothers in the age group 20-25 years with full-term neonates (37-40 weeks). The concentrations of Pb, Cd, Cu and Zn were found to be low in cord blood as compared to mother's blood and the ratio between cord blood and maternal blood for the respective elements was found to be approximately 0.80, 0.86, 0.47 and 0.40. On the other hand, the concentrations of Fe and Mg in the mother's blood were found to be lower than those in the cord blood. Prenatal exposure to lead in Mumbai, though low (5.1 microg/dl), is approximately 2-3 times higher than that observed in Canada or Italy. A strong correlation (r = 0.79) between the maternal and cord blood lead levels has been observed during the present study.     

Investigation on the effects of SiC particle addition in the weld zone during friction stir welding of Al 6351 alloy

The International Journal of Advanced Manufacturing Technology - This study attempts to incorporate SiC particles in the weld zone during friction stir welding of Al 6351 alloy. SiC particles of...     

Tamarind Fruit Fiber and Glass Fiber Reinforced Polyester Composites

Polyester-based hybrid composites were developed by combining the tamarind fruit (Tf) and glass fibers into a polyester matrix. Hardness, impact strength, frictional coefficient, and chemical resistance of hybrid composites with and without alkali treatments were studied. Variation of the aforementioned mechanical properties and chemical resistance was studied with different fiber lengths, such as 1, 2, and 3 cm. A 9 vol% of the tamarind and glass fibers was reinforced into the polyester matrix. The aforementioned mechanical properties were optimally improved at 2-cm fiber length when compared with 1- and 3-cm fiber lengths. Chemical resistance was also significantly improved for all chemicals except toluene. A 3°C rise in decomposition temperature while a 2°C rise in glass transition temperature was observed from TGA and DSC micrograms, respectively.     

Enhancement in Strain Hardening on Boron Addition in As-Cast Ti–6Al–4V Alloy

It has been previously reported that the addition of boron to Ti–6Al–4V results in significant refinement of the as-cast microstructure and enhancement in the strain hardening. However, the mechanism for the latter effect has not been adequately studied. The aim of this study was to understand the reasons for the enhancement in room temperature strain hardening on addition of boron to as cast Ti–6Al–4V alloy. A study was conducted on slip transmission using SEM, TEM, optical profilometry and four point probe resistivity measurements on un-deformed and deformed samples of Ti–6Al–4V–xB with five levels of boron. Optical profilometry was used to quantify the magnitude of offsets on slip traces which in turn provided information about the extent of planar or multiple slip. Studies on deformed samples reveal that while lath boundaries appear to easily permit dislocation slip transmission, colony boundaries are potent barriers to slip. From TEM studies it was also observed that while alloys containing lower boron underwent planar slip, deformation was more homogeneous in higher boron alloys due to multiple slip resulting from large number of colony boundaries. Multiple slip is also proposed to be the prime cause of the enhanced strain hardening.     

Effect of Pre-heat and Inert Gas Species on Cryogenic Aerosol Cleaning Performance in Semiconductor Manufacturing

Cryogenic aerosol cleaning is a dry cleaning method used in the back end of line (BEOL) semiconductor manufacturing to remove defects from planar hydrophobic surfaces such as SiCOH and SiCxNyHz. Cryogenic aerosol cleaning is preferred over conventional wet cleaning methods as it is a non-contact cleaning method, which uses inert gases to generate sub-micrometer-sized solid aerosol particles that physically remove nanometer-sized contaminants on wafer surfaces. Particle removal mechanism involves detachment of the particles upon impact with aerosol, diffusion, and finally entrainment away from the wafer. In BEOL metal line patterning, particles on the dielectric isolation surfaces translate through the subsequent lithography and copper fill steps in to single or multiple metal line open defects that are yield killers. In this study, we show that the particle removal performance of the standard aerosol cleaning can be enhanced by pre-heating the wafer and use of a higher molecular weight inert gas, namely Ar, for aerosol generation. Both the addition of a Pre-heat step and the use of Ar as the aerosol source showed 47–52% reduction in single and multiple line opens detected through wafer electrical tests during high volume semiconductor manufacturing process.