Chronically Elevated Exogenous Glucose Elicits Antipodal Effects on the Proteome Signature of Differentiating Human iPSC-Derived Pancreatic Progenitors

The past decade revealed that cell identity changes, such as dedifferentiation or transdifferentiation, accompany the insulin-producing β-cell decay in most diabetes conditions. Mapping and controlling the mechanisms governing these processes is, thus, extremely valuable for managing the disease progression. Extracellular glucose is known to influence cell identity by impacting the redox balance. Here, we use global proteomics and pathway analysis to map the response of differentiating human pancreatic progenitors to chronically increased in vitro glucose levels. We show that exogenous high glucose levels impact different protein subsets in a concentration-dependent manner. In contrast, regardless of concentration, glucose elicits an antipodal effect on the proteome landscape, inducing both beneficial and detrimental changes in regard to achieving the desired islet cell fingerprint. Furthermore, we identified that only a subgroup of these effects and pathways are regulated by changes in redox balance. Our study highlights a complex effect of exogenous glucose on differentiating pancreas progenitors characterized by a distinct proteome signature.     

Identification of a photooxygenation product of chlortetracycline in hog lagoons using LC/ESI-ion trap-MS and LC/ESI-time-of-flight-MS

In the present work, a photoproduct of chlortetracycline (CTC) was identified for the first time in hog lagoon samples from confined animal feeding operations. Screening of several samples by LC/ESI-MS indicated the presence of a potential photooxygenation product of CTC with a nominal mass that was 32 Da higher than the parent drug. Generation of this assumed photoproduct (designated M510) was achieved in a 24-h irradiation experiment of an oxygenated alkaline medium containing 50 mg L(-)(1) CTC. Accurate mass measurements with an ESI-TOF-MS of the protonated isomerization product of CTC (iCTC) and the postulated photooxygenation product, bearing two oxygen atoms more than iCTC, were m/z 479.1229 and 511.1109, respectively. These corresponded to errors of -2.8 ppm for iCTC and +1.0 ppm for M510 relative to the theoretical masses. The generation of second- and third-stage mass spectra in an ESI-ion trap-MS showed similar characteristic fragmentation patterns for iCTC and the photoproduct M510, leading to the conclusion that the M510 structure consisted of an iCTC-like skeleton bearing two additional hydroxy groups. The site and configuration of one hydroxylation was confidently assigned, while the position of the other hydroxy group was tentatively assigned. Comparison of the (+)-ESI-MS(3) spectrum and the retention time of M510 in the sample from the irradiation experiment with those from the hog lagoon samples yielded excellent agreement, suggesting that the compounds were identical. Quantitative analysis of seven hog lagoon samples showed iCTC concentrations of 1910-15 800 microg L(-)(1), while the levels of M510 were found to be between 46 and 303 microg L(-)(1).     

Study on the effects of humic and fulvic acids on quantum dot nanoparticles using capillary electrophoresis with laser-induced fluorescence detection

The increasing production and use of quantum dot (QD) nanoparticles have caused concerns on the possibility of contaminating the aquatic and terrestrial ecosystems with wastes that may contain QDs. Therefore, studies on the behavior of QDs upon interaction with components of the natural environment have become of interest. This study investigated the fluorescence and electrophoretic mobility of carboxylic or amine polyethylene glycol (PEG)-functionalized CdSe/ZnS QDs in the presence of two aquatic humic substances (HS), Suwannee River humic and fulvic acids, using capillary electrophoresis with laser-induced fluorescence detection. Results showed initial enhancement in fluorescence of QDs at the onset of the interaction with HS, followed by fluorescence quenching at longer exposure with HS (>30 min). It was also observed that the electrophoretic mobility of QDs increases with increasing concentration of HS, suggesting an increase in the ratio in charge to hydrodynamic size of the nanoparticles. To determine if the QDs degraded upon interaction with HS, the QD-HS mixtures were dialyzed to separate free Cd2+ from intact QDs, followed by analysis of the solutions using inductively coupled plasma-mass spectrometry. Results suggested that degradation of QDs in the presence of HS did not occur within the period of incubation.     

Monolithic PIN-HEMT receiver with internal equaliser for long-wavelength fibre optic communications

An optical receiver, in which a GaInAs PIN photodiode, an AlInAs/GaInAs HEMT high impedance amplifier and even an equaliser were integrated monolithically on an InP substrate, has been fabricated. An optical sensitivity of -30.4 dBm was obtained at 1.2 Gbit/s and 1.3 mu m wavelength.<>     

Structural characterization of metabolites of the X-ray contrast agent iopromide in activated sludge using ion trap mass spectrometry

Identification of degradation products of environmental contaminants is a challenging task because not only are they present in very low concentrations but they are also mixed with complex matrixes that interfere with detection. This work illustrates a simple approach using ion trap mass spectrometry combined with H/D-exchange experiments to elucidate the structures of iopromide metabolites formed during biodegradation in activated sludge. Iopromide is an X-ray contrast agent that has been detected frequently in effluents of wastewater treatment plants and in surface waters due to its persistence and high usage. Three metabolites produced by oxidation of the primary alcohols (forming carboxylates) on the side chains of iopromide were identified in a batch reactor with mixed liquor from a conventional activated sludge. Derivatization of the carboxylic acid to form a methyl ester and interpretation of the MS2 data of this derivative aided in the confirmation of the identities of these metabolites. Furthermore, one metabolite formed by dehydroxylation at the two side chains was identified in a batch reactor with mixed liquor from a nitrifying activated sludge. The MS2 fragmentation pattern of iopromide and its metabolites revealed that the iodinated ring remains intact and that minor transformations in the structure occur during biodegradation of iopromide in biological wastewater treatment plants.     

Acceptor recognition of kojibiose phosphorylase from Thermoanaerobacter brockii: syntheses of glycosyl glycerol and myo-inositol

The glucosyl transfer reaction of kojibiose phosphorylase (KP; EC 2.4.1.230) was examined using glycerol or myo-inositol as an acceptor. In the case of glycerol, KP produced two main transfer products: saccharides A and B. The structure of saccharide A was O-alpha-D-glucopyranosyl-(1-->1)-glycerol and that of saccharide B was O-alpha-D-glucopyranosyl-(1-->2)-O-alpha-D-glucopyranosyl-(1-->1)-glycerol. These results show that KP transferred a glucose residue to the hydroxyl group at position 1 of glycerol. On the other hand, when myo-inositol was used as an acceptor, KP produced four transfer products: saccharides 1-4. The structures of saccharides 1 and 2 were O-alpha-D-glucopyranosyl-(1-->1)- and O-alpha-D-glucopyranosyl-(1-->5)-myo-inositol, respectively; those of saccharides 3 and 4 were O-alpha-D-glucopyranosyl-(1-->2)-O-alpha-D-glucopyranosyl-(1-->1)- and O-alpha-D-glucopyranosyl-(1-->2)-O-alpha-D-glucopyranosyl-(1-->5)-myo-inositol, respectively. KP transferred a glucose residue to the hydroxyl group at position 1 or 5 of myo-inositol. On the basis of the structures of their glucosyl transfer products, glycerol and myo-inositol were found to have a common structure with three hydroxyl groups corresponding to the hydroxyl group of the glucose molecule at positions 2, 3 and 4. The conformation of these three hydroxyl groups in the structure is equatorial. This structure is the substrate recognition site of KP. It has been suggested that KP strictly recognizes the structures of glycerol and myo-inositol, and catalyzes the transfer reaction of a glucose residue to the hydroxyl group at position 1 in glycerol, and at position 1 or 5 in myo-inositol, corresponding to position 2 in glucose.     

Enhanced biodegradation of iopromide and trimethoprim in nitrifying activated sludge

Iopromide (an X-ray contrast agent) and trimethoprim (an antibacterial drug) are frequently detected pharmaceuticals in effluents of wastewater treatment plants (WWTPs) and in surface waters due to their persistence and high usage. Laboratory-scale experiments showed that a significantly higher removal rate in nitrifying activated sludge as compared to conventional activated sludge was observed for both iopromide and trimethoprim. When the activity of the nitrifying bacteria was inhibited, the percent removal of iopromide decreased from 97 to 86% while trimethoprim removal decreased from 70 to 25%. The metabolite of iopromide identified when nitrification was not inhibited was a dehydroxylated iopromide at the two side chains. However, when the nitrifying bacteria were inhibited the metabolite identified was a carboxylate, formed during the oxidation of the primary alcohol on the side chain of iopromide. These results suggest that the nitrifying bacteria are important in the observed biodegradation of iopromide in the activated sludge with higher solid retention time (SRT). Results from the laboratory-scale study were corroborated by the observed removal efficiencies in a full-scale municipal WWTP, which showed that iopromide (ranging from 0.10 to 0.27 microg/L) and trimethoprim (ranging from 0.0.08 to 0.53 microg/L) were removed more effectively in the nitrifying activate sludge which has a higher SRT (49 days) than in the conventional activated sludge (SRT of 6 days). In nitrifying activated sludge, the percent removal of iopromide in the WWTP reached 61%, while in conventional activated sludge, average removal was negligible. For trimethoprim, removal was limited to about 1% in the conventional activated sludge, while in the nitrifying activated sludge, the removal was increased to 50%.     

Enhanced biodegradation of carbamazepine after UV/H2O2 advanced oxidation

Carbamazepine is one of the most persistent pharmaceutical compounds in wastewater effluents due to its resistance to biodegradation-based conventional treatment. Advanced oxidation can efficiently degrade carbamazepine, but the toxicity and persistence of the oxidation products may be more relevant than the parent. This study sets out to determine whether the products of advanced oxidation of carbamazepine can be biotransformed and ultimately mineralized by developing a novel methodology to assess these sequential treatment processes. The methodology traces the transformation products of the (14)C-labeled carbamazepine during UV/hydrogen peroxide advanced oxidation and subsequent biotransformation by mixed, undefined cultures using liquid scintillation counting and liquid chromatography with radioactivity, mass spectrometry, and UV detectors. The results show that the oxidation byproducts of carbamazepine containing a hydroxyl or carbonyl group can be fully mineralized by a mixed bacterial inoculum. A tertiary treatment approach that includes oxidation and biotransformation has the potential to synergistically mineralize persistent pharmaceutical compounds in wastewater treatment plant effluents. The methodology developed for this study can be applied to assess the mineralization potential of other persistent organic contaminants.     

Synthesis of TiO2 nanoparticles at low hydrothermal temperature and its performance for DSSC sensitized using natural dye extracted from Melastoma malabathricum L. seeds

Efficiency of a dye‐sensitized solar cell (DSSC) device depends on its semiconductor layer and the sensitizing dye to absorb the light. This work seeks to obtain the best solvent for the natural dye extraction from Melastoma malabathricum L. seeds. The extracted dye is used as sensitizer on TiO₂ nanoparticles produced via hydrothermal but optimized at relatively low temperature. Infrared characterization of the extracted dyes showed differences in functional groups using different solvents, whereas ultraviolet visible examination of the dyes showed differences in intensity along the spectrum ranges of 600 to 400 nm with maximum absorption around 550 to 500 nm. Thermal analysis revealed that the natural dye should be stable around room temperature. Analysis on the synthesized TiO₂ nanoparticles showed that the average crystallite size reported in the previous work is consistent with crystallite sizes observed in the transmission electron microscope images. Photoactivity examination showed that the DSSC sensitized using natural dye extracted with ethanol containing 20% distilled water on TiO₂ synthesized at 150°C has an efficiency of 5.7%, whereas the one on commercial TiO₂ P25 Degussa has an efficiency of 3.0%. The DSSC device sensitized using commercial dye on TiO₂ synthesized at 150°C has an efficiency of 4.4%, whereas the one on TiO₂ P25 Degussa has an efficiency of 4.0%. This result is promising for further development of the DSSC device using TiO₂ nanoparticles synthesized at low hydrothermal temperature and sensitized with the natural dye.