Gastroprotective effects of herbal medicines (roots)

Herbal medicines are now commonly used all over the world and this has increased global demand. Quality, safety, and efficacy of these drugs have become a serious concern. This review presents the medicinal plants cited in folklore that are used to treat gastrointestinal ulcers. Electronic databases, that is, Web of Science, PubMed, Scopus, and Google Scholar were searched to identify the gastroprotective effects of each plant. Ethnopharmacological studies have reported various botanical products with antiulcer activities, but there has been limited scientific research, presenting clinical data to validate the efficacy and safety of medicinal herbs as gastroprotective agents. Most studies centered on pharmacological properties of medicinal herbs as used animals models. This information has prompted us to compile a list of the medicinal herbs cited in folklore with gastroprotective activity.     

Chemical composition,antioxidative capacity and interactive antimicrobial potency of Satureja khuzestanica Jamzad essential oil and antimicrobial agents against selected food‐related microorganisms

This study aimed to determine the chemical composition, antimicrobial and antioxidative activity of Satureja khuzestanica Jamzad essential oil. The oil was analysed by GC and GC/MS. Twenty‐eight constituents were identified. The oxygenated monoterpenes (78.22%) were the principal compound group. Among them, carvacrol (53.86%) and thymol (19.84%) were the most abundant constituents. The oil exhibited an acceptable antimicrobial activity against most of the tested microorganisms. The checkerboard method was applied to determine fractional inhibitory concentration indices (FICIs) to interpret the synergetic, additive, indifference or antagonistic interactions between essential oil and each of antimicrobials (lysozyme, ciprofloxacin, fluconazole and amphotericin B) against food‐related microorganisms. The synergetic phenomenon (FICI ≤ 0.5) was observed in majority of combinations with the exception of the essential oil and lysozyme. The oil exhibited good 1,1‐diphenyl‐2‐picrylhydrazyl radical scavenging activity (IC₅₀ = 28.71 μg mL^?1). Also, the oil had strong antioxidative activity in β‐carotene‐linoleic acid assay relative antioxidant activity (RAA% = 95.45). This study demonstrated that the essential oil has beneficial biological properties and its simultaneous application with standard antimicrobials against food‐related microorganisms result in reduction in inhibitory doses of the antimicrobials in vitro.     

Mechanism of the reversibility of asphaltene precipitation in crude oil

Asphaltene precipitation and deposition occur in petroleum reservoirs as a change in pressure, temperature and liquid phase composition and reduce the oil recovery considerably. In addition to these, asphaltene precipitates may deposit in the pore spaces of reservoir rock and form plugging, which is referred to as a type of formation damage, i.e. permeability reduction. In all cases above, it is of great importance to know under which conditions the asphaltenes precipitate and to what extent precipitated asphaltenes can be re-dissolved. In other words, to what extent the process of asphaltene precipitation is reversible with respect to change in thermodynamic conditions. In present work, a series of experiments was designed and carried out to quantitatively distinguish the reversibility of asphaltene precipitation upon the change in pressure, temperature and liquid composition. Experiments were conducted in non-porous media. Generally it was observed that the asphaltene precipitation is a partial reversible process for oil under study upon temperature change with hysteresis. However, the precipitation of asphaltene as a function of mixture composition and pressure is nearly reversible with a little hysteresis.     

Investigations of the Failure in Boilers Economizer Tubes Used in Power Plants

In this study, failure of a high pressure economizer tube of a boiler used in gas-Mazut combined cycle power plants was studied. Failure analysis of the tube was accomplished by taking into account visual inspection, thickness measurement, and hardness testing as well as microstructural observations using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and x-ray diffraction (XRD). Optical microscopy images indicate that there is no phase transformation during service, and ferrite-pearlite remained. The results of XRD also revealed Iron sulfate (FeSO₄) and Iron hydroxide sulfate (FeOH(SO₄)) phases formed on the steel surface. A considerable amount of Sulfur was also detected on the outer surface of the tube by EDS analysis. Dew-point corrosion was found to be the principal reason for the failure of the examined tube while it has been left out-of-service.     

Fabrication and modification of polyvinylchloride based heterogeneous cation exchange membranes by simultaneously using Fe-Ni oxide nanoparticles and Ag nanolayer: Physico-chemical and antibacterial characteristics

Polyvinylchloride-blend-styrene butadiene rubber based nanocomposite cation exchange membranes were prepared by solution casting technique. Iron-oxide nanoparticles and Ag-nanolayer were simultaneously utilized as filler and surface modifier in membrane fabrication. The effects of Ag-nanolayer film thickness on membrane physicochemical and antibacterial characteristics of nanocomposite PVC-blend-SBR/Iron-oxide nanoparticles were studied. SEM images showed membrane roughness decreasing by Ag nanolayer thickness increasing. Membrane charge density and selectivity declined by Ag nanolayer coating up to 5 nm in membranes and then showed increasing trend by more nanolayer thickness. Ionic flux also showed increasing trend. Membranes showed good ability in E-Coli removal. 20 nm Ag-nanolayer coated membrane showed better performance compared to others.     

Simultaneous Spectrophotometric Determination of 2-Thiouracil and 2-Mercaptobenzimidazole in Animal Tissue Using Multivariate Calibration Methods: Concerns and Rapid Methods for Detection

ABSTRACT: Two multivariate calibration methods, partial least squares (PLS) and principal component regression (PCR), were applied to the spectrophotometric simultaneous determination of 2-mercaptobenzimidazole (MB) and 2-thiouracil (TU). A genetic algorithm (GA) using partial least squares was successfully utilized as a variable selection method. The concentration model was based on the absorption spectra in the range of 200 to 350 nm for 25 different mixtures of MB and TU. The calibration curve was linear across the concentration range of 1 to 10 μg mL⁻¹ and 1.5 to 15 μg mL⁻¹ for MB and TU, respectively. The values of the root mean squares error of prediction (RMSEP) were 0.3984, 0.1066, and 0.0713 for MB and 0.2010, 0.1667, and 0.1115 for TU, which were obtained using PCR, PLS, and GA-PLS, respectively. Finally, the practical applicability of the GA-PLS method was effectively evaluated by the concurrent detection of both analytes in animal tissues. It should also be mentioned that the proposed method is a simple and rapid way that requires no preliminary separation steps and can be used easily for the analysis of these compounds, especially in quality control laboratories.     

Seismic motion response and fragility analyses of cantilever retaining walls with cohesive backfill

The seismic motion response of a cantilever retaining wall with cohesive and cohesionless backfill materials was evaluated using fully dynamic analysis based on finite difference method. The dynamic analysis was validated based on experimental test results and then compared to analytical and empirical correlations based on Newmark sliding block method. Seven different earthquake events and the backfills with low to high levels of cohesion were considered. Nonlinear regression analyses were carried out to provide correlations between free-field peak ground acceleration (PGA) and maximum relative displacement of the retaining wall. These results were compared to results from empirical and analytical methods. Furthermore, fragility analyses were conducted to determine the probability of damage to the retaining wall for different free-field PGAs and backfill cohesions. It is demonstrated to what extent a small amount of cohesion in backfill material can influence displacement of the retaining wall and probability of damage in seismic conditions.     

Additive manufacturing in the spare parts supply chain

As additive manufacturing (AM) evolves to become a common method of producing final parts, further study of this computer integrated technology is necessary. The purpose of this research is to evaluate the potential impact of additive manufacturing improvements on the configuration of spare parts supply chains. This goal has been accomplished through scenario modeling of a real-life spare parts supply chain in the aeronautics industry. The spare parts supply chain of the F-18 Super Hornet fighter jet was selected as the case study because the air-cooling ducts of the environmental control system are produced using AM technology. In total, four scenarios are investigated that vary the supply chain configurations and additive manufacturing machine specifications. The reference scenario is based on the spare parts supplier's current practice and the possible future decentralization of production and likely improvements in AM technology. Total operating cost, including downtime cost, is used to compare the scenarios. We found that using current AM technology, centralized production is clearly the preferable supply chain configuration in the case example. However, distributed spare parts production becomes practical as AM machines become less capital intensive, more autonomous and offer shorter production cycles. This investigation provides guidance for the development of additive manufacturing machines and their possible deployment in spare parts supply chains. This study contributes to the emerging literature on AM deployment in supply chains with a real-world case setting and scenario model illustrating the cost trade-offs and critical requirements for technology development.