Synthesis of ZnO rod arrays on aluminum recyclable paper and effect of the rod size on power density of eco-friendly nanogenerators

In this work, we demonstrated a novel and effective approach on the use of low-cost electrodes, an eco-friendly substrate and zinc oxide (ZnO) micro or nanorods (MRs or NRs, respectively) for building triboelectric devices (TENGs). The reported strategy focuses on using low-cost materials and fabrication processes. For the first time and without any pre-treatment, an aluminum recyclable paper from the milk carton (named ARP) was used as a substrate and TENG bottom electrode. A systematic study on the growing of ZnO structures on ARP by chemical bath deposition has been carried out. We found that the ZnO rods size, and resistivity of the TENG upper electrode considerably influence the power density of the device. Such sustainable, low-priced ZnO-based TENGs can produce up to 1.6μW/cm² output power density when operated at 50?Hz. The fabrication of an eco-friendly nanogenerator demonstrates the possibility of manufacturing low-cost, flexible, and large-area energy harvesting devices for future applications.     

Daily intake of TBT, Cu, Zn, Cd and As for fishermen in Taiwan

The consumption of contaminated seafood has been reported as an important route of human exposure to metals in Taiwan. We consider the concentrations of TBT, Cu, Zn, Cd, As, and the consumption of oysters of Taiwanese to be the important information related to public health in Taiwan. Therefore, the aim of this study was to evaluate the public health risks associated with TBT, Cu, Zn, Cd and As from shellfish for the general population and fishermen of Taiwan. In general, TBT concentrations in various oysters ranging from 0.32 to 1.51 microg/g dry wt. varied with sampling locations. The highest TBT, Cu, and Zn geometric mean (GM) concentrations in oysters of 1.51, 1180 and 1567 microg/g dry wt. were obtained from the Hsiangshan coastal area. The values of oyster consumption for fishermen were 94.1 and 250 g/day for typically and maximally exposed individuals, respectively. In particular, the highest intake (250 g/day) from fishermen was almost two times greater than that of the general population (139 g/day). The THQ (target hazard quotient) values of Hsiangshan's fishermen are 3.87 and 20.50 for TBT and Cu for maximally exposed individuals are higher than other oyster culture areas. It is interesting that those consuming oysters from Hsiangshan, Lukang, Taishi caused abnormally high THQs of TBT and other metals (100% over 1.0), and TBT was attributed to only 3-21% of the total THQs in different fishermen of Taiwan. Our results suggest that current environmental levels of TBT and other metals are associated with a significant potential threat to human health for fishermen resident in coastal areas of Taiwan.     

High Yield of Wax Ester Synthesized from Cetyl Alcohol and Octanoic Acid by Lipozyme RMIM and Novozym 435

Wax esters are long-chain esters that have been widely applied in premium lubricants, parting agents, antifoaming agents and cosmetics. In this study, the biocatalytic preparation of a specific wax ester, cetyl octanoate, is performed in n-hexane using two commercial immobilized lipases, i.e., Lipozyme^® RMIM (Rhizomucor miehei) and Novozym^® 435 (Candida antarctica). Response surface methodology (RSM) and 5-level-4-factor central composite rotatable design (CCRD) are employed to evaluate the effects of reaction time (1–5 h), reaction temperature (45–65 °C), substrate molar ratio (1–3:1), and enzyme amount (10%–50%) on the yield of cetyl octanoate. Using RSM to optimize the reaction, the maximum yields reached 94% and 98% using Lipozyme^® RMIM and Novozym^® 435, respectively. The optimum conditions for synthesis of cetyl octanoate by both lipases are established and compared. Novozym^® 435 proves to be a more efficient biocatalyst than Lipozyme^® RMIM.     

Effects of annealing on the polymer solar cells based on CdSe-PVK electron acceptor

CdSe-poly(N-vinylcarbazole) (CdSe-PVK) nanocomposite was synthesized and utilized as the electron acceptor in the active layer of polymer solar cells. The photovoltaic properties of the polymer solar cells based on poly(3-hexylthiophene) (P3HT):CdSe-PVK as the active layer were investigated in detail. The effects of annealing temperature (100-200 °C) and time (5-60 min) on the device performance were studied. At annealing temperature of 150 °C for 30 min, the device demonstrated an optimal efficiency of 0.235% under AM 1.5 (100 mW cm⁻²) solar simulated light irradiation. The improved efficiency under the optimal conditions was confirmed by the highest light harvest in UV-vis spectra due to the increased crystallinity of P3HT after thermal annealing. Photoluminescence of these devices also exhibited that the quench effect increases with the increasing of annealing temperature, indicating that the charge separation between electron-donating (P3HT) and electron-accepting (CdSe-PVK) molecules was increased after heat treatment. Atomic force microscopy (AFM) images showed that the phase segregation and 3D interpenetrating networks of P3HT:CdSe-PVK were responsible for the enhancement of the device efficiency.     

Body weight management effect of burdock (Arctium lappa L.) root is associated with the activation of AMP-activated protein kinase in human HepG2 cells

Burdock (Arcticum lappa L.) root is used in folk medicine and also as a vegetable in Asian countries. In the present study, burdock root treatment significantly reduced body weight in rats. To evaluate the bioactive compounds, we successively extracted the burdock root with ethanol (AL-1), and fractionated it with n-hexane (AL-2), ethyl acetate (AL-3), n-butanol (AL-4), and water (AL-5). Among these fractions, AL-2 contained components with the most effective hypolipidemic potential in human hepatoma HepG2 cells. AL-2 decreased the expression of fatty acid synthase (FASN) and inhibited the activity of acetyl-coenzyme A carboxylase (ACC) by stimulating AMP-activated protein kinase (AMPK) through the LKB1 pathway. Three active compounds were identified from the AL-2, namely α-linolenic acid, methyl α-linolenate, and methyl oleate. These results suggest that burdock root is expected to be useful for body weight management.     

Toward multiple maximum power point estimation of photovoltaic systems based on semiconductor theory

Environmental conditions, such as temperature, non‐uniform irradiation, and solar shading, deeply affect the characteristics of photovoltaic (PV) modules in PV‐assisted generation systems. Several local maximum power points (MPPs) are found in the power–voltage curve of PV systems constructed by series/parallel‐connected PV modules under partially shaded conditions. The characteristics of PV systems change unpredictably when multiple MPPs occur, so the actual MPP tracking (MPPT) becomes a difficult task. Conventional MPPT methods for the PV systems under partially shaded conditions cannot quickly find the actual MPP such that the optimal utilization of PV systems cannot be achieved. Based on the p–n junction semiconductor theory, we develop a multipoint direct‐estimation (MPDE) method to directly estimate the multiple MPPs of the PV systems under partially shaded conditions and to cope with the mentioned difficulties. Using the proposed MPDE method, the multiple MPPs of the PV systems under partially shaded conditions can be directly determined from their irradiated current–voltage and power–voltage characteristic curves. The performances of the proposed MPDE method are evaluated by examining the characteristics of multiple MPPs of PV systems with respect to different shading strengths and numbers of the shaded PV modules and also tested using the field data. The experimental results demonstrate that the proposed MPDE method can simply and accurately estimate the multiple MPPs of the PV systems under partially shaded conditions. The optimization of MPP control models and the MPPT for PV systems could be achieved promisingly by applying the proposed method. Copyright © 2014 John Wiley & Sons, Ltd.     

A generalised optimal linear quadratic tracker with universal applications – part 1: continuous-time systems

This paper presents a generalised optimal linear quadratic analog tracker (LQAT) with universal applications for the continuous-time (CT) systems. This includes: (1) a generalised optimal LQAT design for the system with the pre-specified trajectories of the output and the control input and additionally with both the input-to-output direct-feedthrough term and known/estimated system disturbances or extra input/output signals; (2) a new optimal filter-shaped proportional plus integral state-feedback LQAT design for non-square non-minimum phase CT systems to achieve a minimum phase-like tracking performance; (3) a new approach for computing the control zeros of the given non-square CT system; and (4) a one-learning-epoch input-constrained iterative learning LQAT design for the repetitive CT system.     

Optimization of the Extraction of <Emphasis Type="Italic">Alpinia oxyphylla</Emphasis> Essence Oil in Supercritical Carbon Dioxide

The essence oil of the Alpinia oxyphylla seed has been used as a vasodilatatory and analgesic agent in pharmacology. The extraction of the essence oil in supercritical carbon dioxide (SC-CO₂) from Alpinia oxyphylla seeds was investigated. Small particles were obtained after breaking open, sieving, and drying from the Alpinia oxyphylla seeds. The small particles were placed in a 5-L extraction tank in a temperature-controlled system. The CO₂ flow rate of the system was set at 1 L/min in this study. Response surface methodology with a three-factor and three-level Box-Behnken experimental design was used to evaluate the effects of the reaction parameters such as extraction time (1, 2, 3 h), temperature (45, 55, 65 °C), and pressure (20, 30, 40 MPa), on the extraction yield of the essence oil from Alpinia oxyphylla seeds. The results indicate that the extraction pressure was the most important parameter affecting the yield of the essence oil. A model for the estimation of the yield was developed. Based on the analysis of ridge max, the optimal extraction conditions were established as an extraction time of 2.8 h, a temperature of 67.5 °C, and a pressure of 28.5 MPa, with an expected yield of 2.78%. Extraction of Alpinia oxyphylla essence oil in SC-CO₂ under these optimal conditions was conducted, and a yield of 2.77 ± 0.19% was obtained.     

Trend transformation of drain-current degradation under drain-avalanche hot-carrier stress for CLC n-TFTs

Continuous-wave green laser-crystallized (CLC) single-grain-like polycrystalline silicon n-channel thin-film transistors (poly-Si n-TFTs) demonstrate the higher electron mobility and turn-on current than excimer laser annealing (ELA) poly-Si n-TFTs. Furthermore, high drain voltage accelerates the flowing electrons in n-type channel, and hence the hot-carriers possibly cause a serious damage near the drain region and deteriorate the source/drain (S/D) current. In this study, at high drain stress voltage, it appears that CLC TFT was degraded in the initial stress time (before 50 s), but the drain current was enhanced after 50 s. After 50 s stress time, the amount of grain boundary trap states near the drain side was getting large and the reflowing holes damaged the source region or injected into gate oxide near source side as well.     

Study of aerodynamical interference for a wind turbine

A two-dimensional interference model of upwind wind turbine, based on NREL Phase VI, was simulated by an available Navier–Stokes solver under parallel process. The simulation domain was divided into a stationary tower domain and a sliding blade domain with varying geometric factors, including blade chord to tower diameter ratio and tower-blade gap to tower diameter ratio, to figure out the unsteady problem. The turbulence model was treated with SST k–ω turbulence model and the boundary layers around the solid walls were refined by the y⁺ value. The simulated results of velocity field were compared with the potential cylinder flow, and some phenomena were exhibited, including the movement of stagnation point of tower, the skewed wake of tower and the excess of velocity in the field. The lift force coefficient of blade was different from the ideal angle of attack for the blade passing in front of the potential cylinder flow.