In situ TEM study on changes in structure and electrical conductance of carbon nanotube-gold contact induced by local joule heating

Electrical conductance of multi-walled carbon nanotubes (MWCNTs) with closed and open tips contacting with a gold (Au) electrode was studied by in situ transmission electron microscopy. When a current density through the contact region reached a threshold value of 2.6 × 10⁸ A/cm², the MWCNT tip was embedded into the Au surface by local melting of Au, and the total resistance was reduced with the increase of the contact area. Conductance per unit area at the contact between the MWCNT and Au electrode for the open-ended MWCNT is four times larger than that for the close-ended one, which is due to the direct connection of inner walls of the open-ended MWCNT with the Au surface.     

Effect of chitosan-gluconic acid conjugate/poly(vinyl alcohol) cryogels as wound dressing on partial-thickness wounds in diabetic rats

We previously developed chitosan cryogels from chitosan-gluconic acid conjugate without using toxic additives for wound care. In this study, we improved physiological characteristics of the previous cryogels by incorporating poly(vinyl alcohol) that also form cryogels. Mechanical strength of the cryogels was more than two times higher than that of the previous cryogels. Furthermore, the incorporation of poly(vinyl alcohol) enhanced water retention and resistance to degradation of the gels by lysozyme. The cryogels retained the favorable biological properties of the previous cryogels that they accelerate infiltration of inflammatory cells into wound sites. Time period for repairing 50 % of initial area of partial-thickness skin wound treated with the cryogels (4.0 ± 1.1 days) was shorter than those with gauze (6.5 ± 0.3 days) or a commercial hydrogel dressing (5.7 ± 0.3 days). Finally, we confirmed that incorporation of basic fibroblast growth factor into the cryogels was effective to further accelerate wound healing (2.7 ± 1.0 days). These results demonstrate that the cryogels in this study are promising for wound care.     

Practical Continuous‐Flow Controlled/Living Anionic Polymerization

A continuous‐flow reaction system was developed, allowing flow conditions of the entire system to be maintained at a predetermined constant level, which is one of the most significant factors for successful industrial application. Controlled/living anionic polymerization was selected as a model reaction since the characteristics of its polymer products, molecular weights, and molecular weight distributions are highly susceptible to changes in the relative flow rates of a monomer and initiator solutions. In flow microreactors, controlled/living anionic polymerization of styrene in tetrahydrofuran (THF)/hexane initiated by THF‐diluted n‐butyllithium (n‐BuLi) was examined. Poly(styrenes) of larger molecule sizes such as Mn > 15 000 were successfully synthesized. After continuous operation for four hours, ca. 0.5 kg of the polymer was readily produced with narrow molecular weight distribution, demonstrating the applicability of this continuous‐flow system for controlled/living anionic polymerization on considerably large scale with a view to its industrial usage in the future.     

Safety performance of the 4S reactor on the ATWS events – statistical estimation of uncertainty

4S reactor is a sodium-cooled fast reactor developed as a small-decentralized power supply. The name of “4S” in this reactor stands for Super-Safe, Small and Simple, and they show representative features of the reactor.

The purpose of the present work is to evaluate quantitatively the super-safety of 4S reactor, and the safety performance is analyzed with ARGO-3, which is a plant dynamics code of a sodium-cooled fast reactor.

In this evaluation, some events, such as Unprotected Loss of Flow (ULOF) and Unprotected Transient Overpower (UTOP), are selected as typical cases from various transients and accidents. After metrics concerned with safety design is defined for each event, it is evaluated with statistical methods whether each metric satisfies acceptance criteria in a given criteria level.

Result about ULOF is as follows. The coolant temperature in the nominal hottest assembly outlet, “T_c” is selected as metric, and the upper side value of 95% confidential section in T_c is below 900 °C that is acceptance criteria. Also in UTOP, it is shown that the fuel maximum temperature in the nominal hottest assembly, “T_f” satisfies acceptance criteria. This result shows that 4S reactor has margin for safety acceptance criteria.     

Microbial sensor for preliminary screening of mutagens utilizing a phage induction test

For the preliminary screening of mutagens, a novel microbial sensor system was developed utilizing a phage induction test. Escherichia coli lysogenic strain GY5027 and nonlysogenic strain GY5026 were used in this study. The number of living cells was determined by measuring the respiration of cells immobilized onto an oxygen electrode. The injection of a mutagen, such as AF-2 and MNNG, caused the phage induction in the lysogenic strain, resulting in the decreased respiration of only the lysogenic strain immobilized onto the oxygen electrode but not of nonlysogenic strain. The rate of current increase correlated well with the concentration of mutagens. The sensor responses to the antibiotics and bactericides were definitely different from those of mutagens. Therefore, utilization of this microbial sensor system makes possible the estimation of a substrate's mutagenicity.     

A case of cavernous dural arteriovenous fistula resulting in intracerebral extravasation during transvenous embolization

Cortical venous drainage has been described as one of the major risk factors for dural arteriovenous fistula, which may induce venous hypertension leading to venous ischemia or intracerebral hemorrhage. However, it is rather rare to observe cortical venous drainage manifesting in this way in the cavernous sinus region. We report a case of a 55-year-old gentleman with a right cavernous dural arteriovenous fistula, presenting with conjunctival chemosis, exophthalmus and ocular hypertension on the affected side. Magnetic resonance imaging showed a small intracerebral hemorrhage in the right frontal lobe. Cerebral angiography revealed a dural arteriovenous fistula in the right cavernous sinus draining into the right olfactory vein via the uncal vein, as well as into the superior and inferior ophthalmic veins. This unusual cortical venous reflux was thought to be consistent with the intracerebral hemorrhage found on the magnetic resonance imaging. The patient underwent transvenous embolization for the dural arteriovenous fistula using an inferior petrosal catheterization into the uncal vein was difficult, and the cortical venous reflux through the vein seemed to be slight. However, extravasation of the contrast material occurred in the right frontal lobe after obliteration of the ophthalmic veins during the procedure. The cause of the extravasation was suspected to be the same olfactory vein that had been involved in the previous intracerebral hemorrhage. The obliteration of the dural fistula was continued rapidly, and the fistula disappeared after the embolization. Neurologically, the patient had no noticeable troubles, except for a mild headache. The pretreatment symptoms were alleviated within several days, and the patient was discharged in a week. We emphasize the following points from this rare case in order to facilitate a safer procedure during transvenous embolization for cavernous dural arteriovenous fistula. It is important to obliterate the cortical venous drainage as early as possible, even if the reflux is small or the catheterization is difficult. Repeated, careful sinography is useful for the evaluation of the drainage pattern at certain stages during the transvenous embolization procedure.     

Abnormal myelination in a patient with ring chromosome 18

BACKGROUND: Most adult anatomical texts state that the deep inguinal ring is situated midway between the anterior superior iliac spine and the pubic tubercle. The aim of this study was to determine if this was true in prepubescent children. METHODS: A total of 107 inguinal ligaments and canals were measured during inguinal operations in 80 children (68 boys, age range 1-118 months). RESULTS: The length of the inguinal ligament increased from a median of 4.3 cm (range 3.6-6.8) at less than 1 year of age to 7.5 cm (range 6.7-10.1) at over 4 years of age. The internal ring was situated medial to the midpoint of the inguinal ligament throughout childhood. The ratio of internal ring to public tubercle over inguinal ligament length was 42% (range 27-58) at less than 2 years; and 34% (range 25-46) at over 4 years. The inguinal canal remained short (median 1 cm (range 0.7-1.1) at less than 2 years, and median 1.1 cm (range 0.7-2.3) at over 4 years) suggesting that growth of the inguinal region in this age group occurs outside the canal. CONCLUSIONS: These results have implications for the siting of incisions, and question the necessity of opening the inguinal canal in children.